From: Nishanth Menon <nm@ti.com>
To: Nitin Yadav <n-yadav@ti.com>
Cc: <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
Date: Fri, 27 Oct 2023 06:22:03 -0500 [thread overview]
Message-ID: <20231027112203.wynnevanyqe7xxw7@lapel> (raw)
In-Reply-To: <20231027093950.1202549-2-n-yadav@ti.com>
On 15:09-20231027, Nitin Yadav wrote:
> Add sdhci0 DT node in k3-am62a-main for eMMC support. Droping
> ITAP values as they are NA in datasheet[0] for lower speed modes.
> Add mmc0 alias for sdhci0 in k3-am62a7-sk.dts.
>
> [0]https://www.ti.com/lit/gpn/am62a3 Table: 7-79 (Page No. 179)
>
> Signed-off-by: Nitin Yadav <n-yadav@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 19 +++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 1 +
> 2 files changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> index de36abb243f1..89b8b7d302cd 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> @@ -488,6 +488,25 @@ main_gpio1: gpio@601000 {
> status = "disabled";
> };
>
> + sdhci0: mmc@fa10000 {
> + compatible = "ti,am62-sdhci";
> + reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
> + clock-names = "clk_ahb", "clk_xin";
> + assigned-clocks = <&k3_clks 57 6>;
> + assigned-clock-parents = <&k3_clks 57 8>;
> + mmc-hs200-1_8v;
> + ti,trm-icp = <0x2>;
> + ti,otap-del-sel-legacy = <0x0>;
> + ti,otap-del-sel-mmc-hs = <0x0>;
> + ti,otap-del-sel-hs200 = <0x6>;
> + bus-width = <8>;
> + ti,clkbuf-sel = <0x7>;
> + status = "disabled";
> + };
> +
> sdhci1: mmc@fa00000 {
> compatible = "ti,am62-sdhci";
> reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index cff283c75f8e..5d28c390b28e 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -20,6 +20,7 @@ aliases {
> serial0 = &wkup_uart0;
> serial2 = &main_uart0;
> serial3 = &main_uart1;
> + mmc0 = &sdhci0;
Bring this in on your second patch in the series.
> mmc1 = &sdhci1;
> };
>
> --
> 2.25.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-10-27 11:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-27 9:39 [PATCH 0/2] Add eMMC support for AM62a SK Nitin Yadav
2023-10-27 9:39 ` [PATCH 1/2] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Nitin Yadav
2023-10-27 11:22 ` Nishanth Menon [this message]
2023-10-27 9:39 ` [PATCH 2/2] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Nitin Yadav
2023-10-27 11:23 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231027112203.wynnevanyqe7xxw7@lapel \
--to=nm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=n-yadav@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox