[PATCH AUTOSEL 6.5 13/30] wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)

[PATCH AUTOSEL 6.5 13/30] wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)

[Sasha Levin]

From: Ingo Rohloff <lundril@gmx.de>

[ Upstream commit fce9c967820a72f600abbf061d7077861685a14d ]

In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is
used, which according to its PCI Vendor ID is from "ITTIM Technology".

This chip works flawlessly with the mt7921e module.  The driver doesn't
bind to this PCI device, because the Vendor ID from "ITTIM Technology" is
not recognized.

This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of
PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi
chip.

Signed-off-by: Ingo Rohloff <lundril@gmx.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 2 ++
 include/linux/pci_ids.h                         | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 95610a117d2f0..ed5a220763ce6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -17,6 +17,8 @@ static const struct pci_device_id mt7921_pci_device_table[] = {
 		.driver_data = (kernel_ulong_t)MT7921_FIRMWARE_WM },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x7922),
 		.driver_data = (kernel_ulong_t)MT7922_FIRMWARE_WM },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ITTIM, 0x7922),
+		.driver_data = (kernel_ulong_t)MT7922_FIRMWARE_WM },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0608),
 		.driver_data = (kernel_ulong_t)MT7921_FIRMWARE_WM },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MEDIATEK, 0x0616),
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8f9a459e16718..e0a11d34ec998 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -180,6 +180,8 @@
 #define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
 #define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
 
+#define PCI_VENDOR_ID_ITTIM		0x0b48
+
 #define PCI_VENDOR_ID_COMPAQ		0x0e11
 #define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
 #define PCI_DEVICE_ID_COMPAQ_TACHYON	0xa0fc
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.5 14/30] wifi: mt76: get rid of false alamrs of tx emission issues

[Sasha Levin]

From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>

[ Upstream commit 413f05d68d11981f5984b49214d3a5a0d88079b1 ]

When the set_chan_info command is set with CH_SWITCH_NORMAL reason,
even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some
unexpected tones, which might confuse DFS CAC tests that there are some
tone leakages. To get rid of these kinds of false alarms, always bypass
DPD calibration when IEEE80211_CONF_IDLE is set.

Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 6 +++---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 1a8611c6b684d..d46db4b04b78b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2687,10 +2687,10 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd)
 	if (mt76_connac_spe_idx(phy->mt76->antenna_mask))
 		req.tx_path_num = fls(phy->mt76->antenna_mask);
 
-	if (cmd == MCU_EXT_CMD(SET_RX_PATH) ||
-	    dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
+	if (dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
 		req.switch_reason = CH_SWITCH_NORMAL;
-	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL ||
+		 phy->mt76->hw->conf.flags & IEEE80211_CONF_IDLE)
 		req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
 	else if (!cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef,
 					  NL80211_IFTYPE_AP))
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 62a02b03d83ba..c22a7ec285cd4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -2861,10 +2861,10 @@ int mt7996_mcu_set_chan_info(struct mt7996_phy *phy, u16 tag)
 		.channel_band = ch_band[chandef->chan->band],
 	};
 
-	if (tag == UNI_CHANNEL_RX_PATH ||
-	    dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
+	if (dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
 		req.switch_reason = CH_SWITCH_NORMAL;
-	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL ||
+		 phy->mt76->hw->conf.flags & IEEE80211_CONF_IDLE)
 		req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
 	else if (!cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef,
 					  NL80211_IFTYPE_AP))
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel