From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Jagan Teki <jagan@amarulasolutions.com>,
Nicolas Belin <nbelin@baylibre.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v8 06/12] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
Date: Thu, 09 Nov 2023 10:00:07 +0100 [thread overview]
Message-ID: <20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-6-81e4aeeda193@linaro.org> (raw)
In-Reply-To: <20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org>
Add new CTS_ENCL & CTS_ENCL_SEL clocks for the G12A compatible
SoCs, they are used to feed the VPU LCD Pixel encoder used for
DSI display purposes.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/clk/meson/g12a.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index f373a8d48b1d..cadd824336ad 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -3549,6 +3549,22 @@ static struct clk_regmap g12a_cts_encp_sel = {
},
};
+static struct clk_regmap g12a_cts_encl_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VIID_CLK_DIV,
+ .mask = 0xf,
+ .shift = 12,
+ .table = mux_table_cts_sel,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_encl_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = g12a_cts_parent_hws,
+ .num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+ },
+};
+
static struct clk_regmap g12a_cts_vdac_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_VIID_CLK_DIV,
@@ -3628,6 +3644,22 @@ static struct clk_regmap g12a_cts_encp = {
},
};
+static struct clk_regmap g12a_cts_encl = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VID_CLK_CNTL2,
+ .bit_idx = 3,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cts_encl",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cts_encl_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
static struct clk_regmap g12a_cts_vdac = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_VID_CLK_CNTL2,
@@ -4407,10 +4439,12 @@ static struct clk_hw *g12a_hw_clks[] = {
[CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
[CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
[CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
+ [CLKID_CTS_ENCL_SEL] = &g12a_cts_encl_sel.hw,
[CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
[CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
[CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
[CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
+ [CLKID_CTS_ENCL] = &g12a_cts_encl.hw,
[CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
[CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
[CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
@@ -4632,10 +4666,12 @@ static struct clk_hw *g12b_hw_clks[] = {
[CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
[CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
[CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
+ [CLKID_CTS_ENCL_SEL] = &g12a_cts_encl_sel.hw,
[CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
[CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
[CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
[CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
+ [CLKID_CTS_ENCL] = &g12a_cts_encl.hw,
[CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
[CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
[CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
@@ -4892,10 +4928,12 @@ static struct clk_hw *sm1_hw_clks[] = {
[CLKID_VCLK2_DIV12] = &g12a_vclk2_div12.hw,
[CLKID_CTS_ENCI_SEL] = &g12a_cts_enci_sel.hw,
[CLKID_CTS_ENCP_SEL] = &g12a_cts_encp_sel.hw,
+ [CLKID_CTS_ENCL_SEL] = &g12a_cts_encl_sel.hw,
[CLKID_CTS_VDAC_SEL] = &g12a_cts_vdac_sel.hw,
[CLKID_HDMI_TX_SEL] = &g12a_hdmi_tx_sel.hw,
[CLKID_CTS_ENCI] = &g12a_cts_enci.hw,
[CLKID_CTS_ENCP] = &g12a_cts_encp.hw,
+ [CLKID_CTS_ENCL] = &g12a_cts_encl.hw,
[CLKID_CTS_VDAC] = &g12a_cts_vdac.hw,
[CLKID_HDMI_TX] = &g12a_hdmi_tx.hw,
[CLKID_HDMI_SEL] = &g12a_hdmi_sel.hw,
@@ -5123,10 +5161,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_vclk2_div12_en,
&g12a_cts_enci_sel,
&g12a_cts_encp_sel,
+ &g12a_cts_encl_sel,
&g12a_cts_vdac_sel,
&g12a_hdmi_tx_sel,
&g12a_cts_enci,
&g12a_cts_encp,
+ &g12a_cts_encl,
&g12a_cts_vdac,
&g12a_hdmi_tx,
&g12a_hdmi_sel,
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-09 9:01 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-09 9:00 [PATCH v8 00/12] drm/meson: add support for MIPI DSI Display Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 01/12] dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 02/12] dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl Neil Armstrong
2023-11-09 17:34 ` Conor Dooley
2023-11-10 7:50 ` Neil Armstrong
2023-11-10 18:26 ` Conor Dooley
2023-11-10 20:12 ` Rob Herring
2023-11-14 14:06 ` Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 03/12] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example Neil Armstrong
2023-11-09 17:50 ` Conor Dooley
2023-11-09 9:00 ` [PATCH v8 04/12] dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example Neil Armstrong
2023-11-09 18:04 ` Conor Dooley
2023-11-10 7:51 ` Neil Armstrong
2023-11-10 20:57 ` Rob Herring
2023-11-14 14:08 ` Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 05/12] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Neil Armstrong
2023-11-09 9:00 ` Neil Armstrong [this message]
2023-11-09 9:00 ` [PATCH v8 07/12] clk: meson: add vclk driver Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 08/12] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 09/12] drm/meson: gate px_clk when setting rate Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 10/12] arm64: meson: g12-common: add the MIPI DSI nodes Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 11/12] DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 12/12] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-6-81e4aeeda193@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=nbelin@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).