From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Jagan Teki <jagan@amarulasolutions.com>,
Nicolas Belin <nbelin@baylibre.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v8 07/12] clk: meson: add vclk driver
Date: Thu, 09 Nov 2023 10:00:08 +0100 [thread overview]
Message-ID: <20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-7-81e4aeeda193@linaro.org> (raw)
In-Reply-To: <20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org>
The VCLK and VCLK_DIV clocks have supplementary bits.
The VCLK has a "SOFT RESET" bit to toggle after the whole
VCLK sub-tree rate has been set, this is implemented in
the gate enable callback.
The VCLK_DIV clocks as enable and reset bits used to disable
and reset the divider, associated with CLK_SET_RATE_GATE it ensures
the rate is set while the divider is disabled and in reset mode.
The VCLK_DIV enable bit isn't implemented as a gate since it's part
of the divider logic and vendor does this exact sequence to ensure
the divider is correctly set.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/clk/meson/Kconfig | 5 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/vclk.h | 51 ++++++++++++++++
4 files changed, 198 insertions(+)
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 29ffd14d267b..59a40a49f8e1 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
tristate
select COMMON_CLK_MESON_REGMAP
+config COMMON_CLK_MESON_VCLK
+ tristate
+ select COMMON_CLK_MESON_REGMAP
+
config COMMON_CLK_MESON_CLKC_UTILS
tristate
@@ -140,6 +144,7 @@ config COMMON_CLK_G12A
select COMMON_CLK_MESON_EE_CLKC
select COMMON_CLK_MESON_CPU_DYNDIV
select COMMON_CLK_MESON_VID_PLL_DIV
+ select COMMON_CLK_MESON_VCLK
select MFD_SYSCON
help
Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 9ee4b954c896..9ba43fe7a07a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
# Amlogic Clock controllers
diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
new file mode 100644
index 000000000000..47f08a52b49f
--- /dev/null
+++ b/drivers/clk/meson/vclk.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include <linux/module.h>
+#include "vclk.h"
+
+/* The VCLK gate has a supplementary reset bit to pulse after ungating */
+
+static inline struct clk_regmap_vclk_data *
+clk_get_regmap_vclk_data(struct clk_regmap *clk)
+{
+ return (struct clk_regmap_vclk_data *)clk->data;
+}
+
+static int clk_regmap_vclk_enable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_data *vclk = clk_get_regmap_vclk_data(clk);
+
+ meson_parm_write(clk->map, &vclk->enable, 1);
+
+ /* Do a reset pulse */
+ meson_parm_write(clk->map, &vclk->reset, 1);
+ meson_parm_write(clk->map, &vclk->reset, 0);
+
+ return 0;
+}
+
+static void clk_regmap_vclk_disable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_data *vclk = clk_get_regmap_vclk_data(clk);
+
+ meson_parm_write(clk->map, &vclk->enable, 0);
+}
+
+static int clk_regmap_vclk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_data *vclk = clk_get_regmap_vclk_data(clk);
+
+ return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops clk_regmap_vclk_ops = {
+ .enable = clk_regmap_vclk_enable,
+ .disable = clk_regmap_vclk_disable,
+ .is_enabled = clk_regmap_vclk_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_vclk_ops);
+
+/* The VCLK Divider has supplementary reset & enable bits */
+
+static inline struct clk_regmap_vclk_div_data *
+clk_get_regmap_vclk_div_data(struct clk_regmap *clk)
+{
+ return (struct clk_regmap_vclk_div_data *)clk->data;
+}
+
+static unsigned long clk_regmap_vclk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
+
+ return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
+ vclk->table, vclk->flags, vclk->div.width);
+}
+
+static int clk_regmap_vclk_div_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
+
+ return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
+ vclk->flags);
+}
+
+static int clk_regmap_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
+ int ret;
+
+ ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
+ vclk->flags);
+ if (ret < 0)
+ return ret;
+
+ meson_parm_write(clk->map, &vclk->div, ret);
+
+ return 0;
+};
+
+static int clk_regmap_vclk_div_enable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
+
+ /* Unreset the divider when ungating */
+ meson_parm_write(clk->map, &vclk->reset, 0);
+ meson_parm_write(clk->map, &vclk->enable, 1);
+
+ return 0;
+}
+
+static void clk_regmap_vclk_div_disable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
+
+ /* Reset the divider when gating */
+ meson_parm_write(clk->map, &vclk->enable, 0);
+ meson_parm_write(clk->map, &vclk->reset, 1);
+}
+
+static int clk_regmap_vclk_div_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
+
+ return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops clk_regmap_vclk_div_ops = {
+ .recalc_rate = clk_regmap_vclk_div_recalc_rate,
+ .determine_rate = clk_regmap_vclk_div_determine_rate,
+ .set_rate = clk_regmap_vclk_div_set_rate,
+ .enable = clk_regmap_vclk_div_enable,
+ .disable = clk_regmap_vclk_div_disable,
+ .is_enabled = clk_regmap_vclk_div_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_vclk_div_ops);
+
+MODULE_DESCRIPTION("Amlogic vclk clock driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
new file mode 100644
index 000000000000..4f25d7ad2717
--- /dev/null
+++ b/drivers/clk/meson/vclk.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#ifndef __VCLK_H
+#define __VCLK_H
+
+#include "clk-regmap.h"
+#include "parm.h"
+
+/**
+ * struct clk_regmap_vclk_data - vclk regmap backed specific data
+ *
+ * @enable: vclk enable field
+ * @reset: vclk reset field
+ * @flags: hardware-specific flags
+ *
+ * Flags:
+ * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
+ */
+struct clk_regmap_vclk_data {
+ struct parm enable;
+ struct parm reset;
+ u8 flags;
+};
+
+extern const struct clk_ops clk_regmap_vclk_ops;
+
+/**
+ * struct clk_regmap_vclk_div_data - vclk_div regmap back specific data
+ *
+ * @div: divider field
+ * @enable: vclk divider enable field
+ * @reset: vclk divider reset field
+ * @table: array of value/divider pairs, last entry should have div = 0
+ *
+ * Flags:
+ * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
+ */
+struct clk_regmap_vclk_div_data {
+ struct parm div;
+ struct parm enable;
+ struct parm reset;
+ const struct clk_div_table *table;
+ u8 flags;
+};
+
+extern const struct clk_ops clk_regmap_vclk_div_ops;
+
+#endif /* __VCLK_H */
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-09 9:01 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-09 9:00 [PATCH v8 00/12] drm/meson: add support for MIPI DSI Display Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 01/12] dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 02/12] dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl Neil Armstrong
2023-11-09 17:34 ` Conor Dooley
2023-11-10 7:50 ` Neil Armstrong
2023-11-10 18:26 ` Conor Dooley
2023-11-10 20:12 ` Rob Herring
2023-11-14 14:06 ` Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 03/12] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example Neil Armstrong
2023-11-09 17:50 ` Conor Dooley
2023-11-09 9:00 ` [PATCH v8 04/12] dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example Neil Armstrong
2023-11-09 18:04 ` Conor Dooley
2023-11-10 7:51 ` Neil Armstrong
2023-11-10 20:57 ` Rob Herring
2023-11-14 14:08 ` Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 05/12] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 06/12] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks Neil Armstrong
2023-11-09 9:00 ` Neil Armstrong [this message]
2023-11-09 9:00 ` [PATCH v8 08/12] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 09/12] drm/meson: gate px_clk when setting rate Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 10/12] arm64: meson: g12-common: add the MIPI DSI nodes Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 11/12] DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel Neil Armstrong
2023-11-09 9:00 ` [PATCH v8 12/12] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-7-81e4aeeda193@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=nbelin@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).