linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Jerome Brunet <jbrunet@baylibre.com>,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	 Jagan Teki <jagan@amarulasolutions.com>,
	 Nicolas Belin <nbelin@baylibre.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	 linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v8 08/12] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
Date: Thu, 09 Nov 2023 10:00:09 +0100	[thread overview]
Message-ID: <20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-8-81e4aeeda193@linaro.org> (raw)
In-Reply-To: <20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org>

In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.

The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
- vclk_div1
- vclk2_div2_en
- vclk2_div4_en
- vclk2_div6_en
- vclk2_div12_en
- vclk2_div2
- vclk2_div4
- vclk2_div6
- vclk2_div12
- cts_encl_sel

vclk2 and vclk2_div uses the newly introduced vclk regmap driver
to handle the enable and reset bits.

In order to set a rate on cts_encl via the vclk2 clock path,
the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
to keep CCF from selection a parent.
The parents of cts_encl_sel & vclk2_sel are expected to be defined
in DT.

The following clock scheme is to be used for DSI:

xtal
\_ gp0_pll_dco
   \_ gp0_pll
      |- vclk2_sel
      |  \_ vclk2_input
      |     \_ vclk2_div
      |        \_ vclk2
      |           \_ vclk2_div1
      |              \_ cts_encl_sel
      |                 \_ cts_encl	-> to VPU LCD Encoder
      |- mipi_dsi_pxclk_sel
      \_ mipi_dsi_pxclk_div
         \_ mipi_dsi_pxclk		-> to DSI controller

The mipi_dsi_pxclk_div is set as RO in order to use the same GP0
for mipi_dsi_pxclk and vclk2_input.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/clk/meson/g12a.c | 68 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 47 insertions(+), 21 deletions(-)

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index cadd824336ad..fb3d9196a1fd 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -22,6 +22,7 @@
 #include "clk-regmap.h"
 #include "clk-cpu-dyndiv.h"
 #include "vid-pll-div.h"
+#include "vclk.h"
 #include "meson-eeclk.h"
 #include "g12a.h"
 
@@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_vclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3193,7 +3194,7 @@ static struct clk_regmap g12a_vclk2_input = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3215,19 +3216,32 @@ static struct clk_regmap g12a_vclk_div = {
 };
 
 static struct clk_regmap g12a_vclk2_div = {
-	.data = &(struct clk_regmap_div_data){
-		.offset = HHI_VIID_CLK_DIV,
-		.shift = 0,
-		.width = 8,
+	.data = &(struct clk_regmap_vclk_div_data){
+		.div = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.enable = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 16,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 17,
+			.width   = 1,
+		},
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "vclk2_div",
-		.ops = &clk_regmap_divider_ops,
+		.ops = &clk_regmap_vclk_div_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&g12a_vclk2_input.hw
 		},
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 	},
 };
 
@@ -3246,16 +3260,24 @@ static struct clk_regmap g12a_vclk = {
 };
 
 static struct clk_regmap g12a_vclk2 = {
-	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VIID_CLK_CNTL,
-		.bit_idx = 19,
+	.data = &(struct clk_regmap_vclk_data){
+		.enable = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 19,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 15,
+			.width   = 1,
+		},
 	},
 	.hw.init = &(struct clk_init_data) {
 		.name = "vclk2",
-		.ops = &clk_regmap_gate_ops,
+		.ops = &clk_regmap_vclk_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 	},
 };
 
@@ -3339,7 +3361,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3353,7 +3375,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3367,7 +3389,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3381,7 +3403,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3395,7 +3417,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3461,6 +3483,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
 			&g12a_vclk2_div2_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3474,6 +3497,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
 			&g12a_vclk2_div4_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3487,6 +3511,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
 			&g12a_vclk2_div6_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3500,6 +3525,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
 			&g12a_vclk2_div12_en.hw
 		},
 		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -3561,7 +3587,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_cts_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3717,7 +3743,7 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
 		.ops = &clk_regmap_mux_ops,
 		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
 		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
 	},
 };
 
@@ -3729,7 +3755,7 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mipi_dsi_pxclk_div",
-		.ops = &clk_regmap_divider_ops,
+		.ops = &clk_regmap_divider_ro_ops,
 		.parent_hws = (const struct clk_hw *[]) {
 			&g12a_mipi_dsi_pxclk_sel.hw
 		},

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-11-09  9:01 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-09  9:00 [PATCH v8 00/12] drm/meson: add support for MIPI DSI Display Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 01/12] dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 02/12] dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl Neil Armstrong
2023-11-09 17:34   ` Conor Dooley
2023-11-10  7:50     ` Neil Armstrong
2023-11-10 18:26       ` Conor Dooley
2023-11-10 20:12   ` Rob Herring
2023-11-14 14:06     ` Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 03/12] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example Neil Armstrong
2023-11-09 17:50   ` Conor Dooley
2023-11-09  9:00 ` [PATCH v8 04/12] dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example Neil Armstrong
2023-11-09 18:04   ` Conor Dooley
2023-11-10  7:51     ` Neil Armstrong
2023-11-10 20:57   ` Rob Herring
2023-11-14 14:08     ` Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 05/12] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 06/12] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 07/12] clk: meson: add vclk driver Neil Armstrong
2023-11-09  9:00 ` Neil Armstrong [this message]
2023-11-09  9:00 ` [PATCH v8 09/12] drm/meson: gate px_clk when setting rate Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 10/12] arm64: meson: g12-common: add the MIPI DSI nodes Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 11/12] DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel Neil Armstrong
2023-11-09  9:00 ` [PATCH v8 12/12] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-8-81e4aeeda193@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@amarulasolutions.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=nbelin@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).