[PATCH 00/12] bus: Convert to platform remove callback returning void

[PATCH 00/12] bus: Convert to platform remove callback returning void

[Uwe Kleine-König]

Hello,

this series converts all drivers below drivers/bus to struct
platform_driver::remove_new(). See commit 5c5a7680e67b ("platform:
Provide a remove callback that returns no value") for an extended
explanation and the eventual goal.

drivers/bus/fsl-mc was already addressed earlier with a separate
series[1].

All conversations are trivial, because all .remove() callbacks returned
zero unconditionally.

Some of the drivers touched here don't have a maintainer and there is no
maintainer for all of drivers/bus. It would be great if someone could pick up
the whole series, maybe Arnd might do that?

Best regards
Uwe

[1] https://lore.kernel.org/lkml/20231103230001.3652259-3-u.kleine-koenig@pengutronix.de

Uwe Kleine-König (12):
  bus: hisi_lpc: Convert to platform remove callback returning void
  bus: omap-ocp2scp: Convert to platform remove callback returning void
  bus: omap_l3_smx: Convert to platform remove callback returning void
  bus: qcom-ssc-block-bus: Convert to platform remove callback returning
    void
  bus: simple-pm-bus: Convert to platform remove callback returning void
  bus: sun50i-de2: Convert to platform remove callback returning void
  bus: sunxi-rsb: Convert to platform remove callback returning void
  bus: tegra-aconnect: Convert to platform remove callback returning
    void
  bus: tegra-gmi: Convert to platform remove callback returning void
  bus: ti-pwmss: Convert to platform remove callback returning void
  bus: ti-sysc: Convert to platform remove callback returning void
  bus: ts-nbus: Convert to platform remove callback returning void

 drivers/bus/hisi_lpc.c           | 6 ++----
 drivers/bus/omap-ocp2scp.c       | 6 ++----
 drivers/bus/omap_l3_smx.c        | 6 ++----
 drivers/bus/qcom-ssc-block-bus.c | 6 ++----
 drivers/bus/simple-pm-bus.c      | 7 +++----
 drivers/bus/sun50i-de2.c         | 5 ++---
 drivers/bus/sunxi-rsb.c          | 6 ++----
 drivers/bus/tegra-aconnect.c     | 6 ++----
 drivers/bus/tegra-gmi.c          | 6 ++----
 drivers/bus/ti-pwmss.c           | 5 ++---
 drivers/bus/ti-sysc.c            | 6 ++----
 drivers/bus/ts-nbus.c            | 6 ++----
 12 files changed, 25 insertions(+), 46 deletions(-)

base-commit: b622d91ca201bf97582e9b09ebbaab005ecee86f
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/12] bus: sun50i-de2: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/bus/sun50i-de2.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/sun50i-de2.c b/drivers/bus/sun50i-de2.c
index 414f29cdedf0..3339311ce068 100644
--- a/drivers/bus/sun50i-de2.c
+++ b/drivers/bus/sun50i-de2.c
@@ -24,10 +24,9 @@ static int sun50i_de2_bus_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sun50i_de2_bus_remove(struct platform_device *pdev)
+static void sun50i_de2_bus_remove(struct platform_device *pdev)
 {
 	sunxi_sram_release(&pdev->dev);
-	return 0;
 }
 
 static const struct of_device_id sun50i_de2_bus_of_match[] = {
@@ -37,7 +36,7 @@ static const struct of_device_id sun50i_de2_bus_of_match[] = {
 
 static struct platform_driver sun50i_de2_bus_driver = {
 	.probe = sun50i_de2_bus_probe,
-	.remove = sun50i_de2_bus_remove,
+	.remove_new = sun50i_de2_bus_remove,
 	.driver = {
 		.name = "sun50i-de2-bus",
 		.of_match_table = sun50i_de2_bus_of_match,
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 07/12] bus: sunxi-rsb: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/bus/sunxi-rsb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index db0ed4e5d315..fd3e9d82340a 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -817,15 +817,13 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sunxi_rsb_remove(struct platform_device *pdev)
+static void sunxi_rsb_remove(struct platform_device *pdev)
 {
 	struct sunxi_rsb *rsb = platform_get_drvdata(pdev);
 
 	device_for_each_child(rsb->dev, NULL, sunxi_rsb_remove_devices);
 	pm_runtime_disable(&pdev->dev);
 	sunxi_rsb_hw_exit(rsb);
-
-	return 0;
 }
 
 static const struct dev_pm_ops sunxi_rsb_dev_pm_ops = {
@@ -842,7 +840,7 @@ MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table);
 
 static struct platform_driver sunxi_rsb_driver = {
 	.probe = sunxi_rsb_probe,
-	.remove	= sunxi_rsb_remove,
+	.remove_new = sunxi_rsb_remove,
 	.driver	= {
 		.name = RSB_CTRL_NAME,
 		.of_match_table = sunxi_rsb_of_match_table,
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 00/12] bus: Convert to platform remove callback returning void

[Arnd Bergmann]

On Thu, Nov 9, 2023, at 21:28, Uwe Kleine-König wrote:
> Hello,
>
> this series converts all drivers below drivers/bus to struct
> platform_driver::remove_new(). See commit 5c5a7680e67b ("platform:
> Provide a remove callback that returns no value") for an extended
> explanation and the eventual goal.
>
> drivers/bus/fsl-mc was already addressed earlier with a separate
> series[1].
>
> All conversations are trivial, because all .remove() callbacks returned
> zero unconditionally.
>
> Some of the drivers touched here don't have a maintainer and there is no
> maintainer for all of drivers/bus. It would be great if someone could pick up
> the whole series, maybe Arnd might do that?

Sure, please send a pull request to soc@kernel.org if there
are no further comments.

      Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 06/12] bus: sun50i-de2: Convert to platform remove callback returning void

[Andre Przywara]

On Thu,  9 Nov 2023 21:28:36 +0100
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote:

Hi,

> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart
> from emitting a warning) and this typically results in resource leaks.
> 
> To improve here there is a quest to make the remove callback return
> void. In the first step of this quest all drivers are converted to
> .remove_new(), which already returns void. Eventually after all drivers
> are converted, .remove_new() will be renamed to .remove().
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>  drivers/bus/sun50i-de2.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/bus/sun50i-de2.c b/drivers/bus/sun50i-de2.c
> index 414f29cdedf0..3339311ce068 100644
> --- a/drivers/bus/sun50i-de2.c
> +++ b/drivers/bus/sun50i-de2.c
> @@ -24,10 +24,9 @@ static int sun50i_de2_bus_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int sun50i_de2_bus_remove(struct platform_device *pdev)
> +static void sun50i_de2_bus_remove(struct platform_device *pdev)
>  {
>  	sunxi_sram_release(&pdev->dev);
> -	return 0;
>  }
>  
>  static const struct of_device_id sun50i_de2_bus_of_match[] = {
> @@ -37,7 +36,7 @@ static const struct of_device_id sun50i_de2_bus_of_match[] = {
>  
>  static struct platform_driver sun50i_de2_bus_driver = {
>  	.probe = sun50i_de2_bus_probe,
> -	.remove = sun50i_de2_bus_remove,
> +	.remove_new = sun50i_de2_bus_remove,
>  	.driver = {
>  		.name = "sun50i-de2-bus",
>  		.of_match_table = sun50i_de2_bus_of_match,


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 07/12] bus: sunxi-rsb: Convert to platform remove callback returning void

[Andre Przywara]

On Thu,  9 Nov 2023 21:28:37 +0100
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote:

> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart
> from emitting a warning) and this typically results in resource leaks.
> 
> To improve here there is a quest to make the remove callback return
> void. In the first step of this quest all drivers are converted to
> .remove_new(), which already returns void. Eventually after all drivers
> are converted, .remove_new() will be renamed to .remove().
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Thanks,
Andre

> ---
>  drivers/bus/sunxi-rsb.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
> index db0ed4e5d315..fd3e9d82340a 100644
> --- a/drivers/bus/sunxi-rsb.c
> +++ b/drivers/bus/sunxi-rsb.c
> @@ -817,15 +817,13 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int sunxi_rsb_remove(struct platform_device *pdev)
> +static void sunxi_rsb_remove(struct platform_device *pdev)
>  {
>  	struct sunxi_rsb *rsb = platform_get_drvdata(pdev);
>  
>  	device_for_each_child(rsb->dev, NULL, sunxi_rsb_remove_devices);
>  	pm_runtime_disable(&pdev->dev);
>  	sunxi_rsb_hw_exit(rsb);
> -
> -	return 0;
>  }
>  
>  static const struct dev_pm_ops sunxi_rsb_dev_pm_ops = {
> @@ -842,7 +840,7 @@ MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table);
>  
>  static struct platform_driver sunxi_rsb_driver = {
>  	.probe = sunxi_rsb_probe,
> -	.remove	= sunxi_rsb_remove,
> +	.remove_new = sunxi_rsb_remove,
>  	.driver	= {
>  		.name = RSB_CTRL_NAME,
>  		.of_match_table = sunxi_rsb_of_match_table,


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 06/12] bus: sun50i-de2: Convert to platform remove callback returning void

[Jernej Škrabec]

Dne četrtek, 09. november 2023 ob 21:28:36 CET je Uwe Kleine-König napisal(a):
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart
> from emitting a warning) and this typically results in resource leaks.
> 
> To improve here there is a quest to make the remove callback return
> void. In the first step of this quest all drivers are converted to
> .remove_new(), which already returns void. Eventually after all drivers
> are converted, .remove_new() will be renamed to .remove().
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  drivers/bus/sun50i-de2.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/bus/sun50i-de2.c b/drivers/bus/sun50i-de2.c
> index 414f29cdedf0..3339311ce068 100644
> --- a/drivers/bus/sun50i-de2.c
> +++ b/drivers/bus/sun50i-de2.c
> @@ -24,10 +24,9 @@ static int sun50i_de2_bus_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int sun50i_de2_bus_remove(struct platform_device *pdev)
> +static void sun50i_de2_bus_remove(struct platform_device *pdev)
>  {
>  	sunxi_sram_release(&pdev->dev);
> -	return 0;
>  }
>  
>  static const struct of_device_id sun50i_de2_bus_of_match[] = {
> @@ -37,7 +36,7 @@ static const struct of_device_id sun50i_de2_bus_of_match[] = {
>  
>  static struct platform_driver sun50i_de2_bus_driver = {
>  	.probe = sun50i_de2_bus_probe,
> -	.remove = sun50i_de2_bus_remove,
> +	.remove_new = sun50i_de2_bus_remove,
>  	.driver = {
>  		.name = "sun50i-de2-bus",
>  		.of_match_table = sun50i_de2_bus_of_match,
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 07/12] bus: sunxi-rsb: Convert to platform remove callback returning void

[Jernej Škrabec]

Dne četrtek, 09. november 2023 ob 21:28:37 CET je Uwe Kleine-König napisal(a):
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart
> from emitting a warning) and this typically results in resource leaks.
> 
> To improve here there is a quest to make the remove callback return
> void. In the first step of this quest all drivers are converted to
> .remove_new(), which already returns void. Eventually after all drivers
> are converted, .remove_new() will be renamed to .remove().
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  drivers/bus/sunxi-rsb.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
> index db0ed4e5d315..fd3e9d82340a 100644
> --- a/drivers/bus/sunxi-rsb.c
> +++ b/drivers/bus/sunxi-rsb.c
> @@ -817,15 +817,13 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int sunxi_rsb_remove(struct platform_device *pdev)
> +static void sunxi_rsb_remove(struct platform_device *pdev)
>  {
>  	struct sunxi_rsb *rsb = platform_get_drvdata(pdev);
>  
>  	device_for_each_child(rsb->dev, NULL, sunxi_rsb_remove_devices);
>  	pm_runtime_disable(&pdev->dev);
>  	sunxi_rsb_hw_exit(rsb);
> -
> -	return 0;
>  }
>  
>  static const struct dev_pm_ops sunxi_rsb_dev_pm_ops = {
> @@ -842,7 +840,7 @@ MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table);
>  
>  static struct platform_driver sunxi_rsb_driver = {
>  	.probe = sunxi_rsb_probe,
> -	.remove	= sunxi_rsb_remove,
> +	.remove_new = sunxi_rsb_remove,
>  	.driver	= {
>  		.name = RSB_CTRL_NAME,
>  		.of_match_table = sunxi_rsb_of_match_table,
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel