public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Romain Gantois <romain.gantois@bootlin.com>
To: davem@davemloft.net, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Romain Gantois <romain.gantois@bootlin.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, thomas.petazzoni@bootlin.com,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Luka Perkov <luka.perkov@sartura.hr>,
	Robert Marko <robert.marko@sartura.hr>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>
Subject: [PATCH net-next v2 8/8] ARM: dts: qcom: ipq4019: Add description for the IPQ4019 ESS EDMA and switch
Date: Tue, 14 Nov 2023 10:07:34 +0100	[thread overview]
Message-ID: <20231114090743.865453-9-romain.gantois@bootlin.com> (raw)
In-Reply-To: <20231114090743.865453-1-romain.gantois@bootlin.com>

The Qualcomm IPQ4019 includes a modified version of the QCA8K Ethernet
switch. The switch's CPU port is connected to the SoC through the internal
EDMA Ethernet controller. Add support for these two devices, which are
coupled tightly enough to justify treating them as a single device.

Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi | 13 +++
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi      | 94 +++++++++++++++++++
 2 files changed, 107 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index da67d55fa557..6a185b8b31c6 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -242,6 +242,19 @@ &mdio {
 	pinctrl-names = "default";
 };
 
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cff9..5a4e5d408f72 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -596,6 +596,100 @@ wifi1: wifi@a800000 {
 			status = "disabled";
 		};
 
+		switch: switch@c000000 {
+			compatible = "qcom,ipq4019-ess";
+			reg = <0xc000000 0x80000>, <0x98000 0x800>, <0xc080000 0x8000>;
+			reg-names = "base", "psgmii_phy", "edma";
+			resets = <&gcc ESS_PSGMII_ARES>, <&gcc ESS_RESET>;
+			reset-names = "psgmii", "ess";
+			clocks = <&gcc GCC_ESS_CLK>;
+			clock-names = "ess";
+			mdio = <&mdio>;
+			interrupts = <GIC_SPI  65 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  66 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  67 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  68 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  69 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  70 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  71 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  72 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  73 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  74 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  75 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  76 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  77 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI  80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				swport1: port@1 { /* MAC1 */
+					reg = <1>;
+					label = "lan1";
+					phy-handle = <&ethphy0>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport2: port@2 { /* MAC2 */
+					reg = <2>;
+					label = "lan2";
+					phy-handle = <&ethphy1>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport3: port@3 { /* MAC3 */
+					reg = <3>;
+					label = "lan3";
+					phy-handle = <&ethphy2>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport4: port@4 { /* MAC4 */
+					reg = <4>;
+					label = "lan4";
+					phy-handle = <&ethphy3>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+
+				swport5: port@5 { /* MAC5 */
+					reg = <5>;
+					label = "wan";
+					phy-handle = <&ethphy4>;
+					phy-mode = "psgmii";
+
+					status = "disabled";
+				};
+			};
+		};
+
 		mdio: mdio@90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-11-14  9:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-14  9:07 [PATCH net-next v2 0/8] net: qualcomm: ipqess: introduce Qualcomm IPQESS driver Romain Gantois
2023-11-14  9:07 ` [PATCH net-next v2 1/8] dt-bindings: net: Introduce the Qualcomm IPQESS Ethernet switch Romain Gantois
2023-11-14  9:07 ` [PATCH net-next v2 2/8] net: dsa: qca8k: Make the QCA8K hardware library available globally Romain Gantois
2023-11-14  9:07 ` [PATCH net-next v2 4/8] net: qualcomm: ipqess: Add Ethtool ops to IPQESS port netdevices Romain Gantois
2023-11-14  9:07 ` [PATCH net-next v2 5/8] net: qualcomm: ipqess: add bridge offloading features to the IPQESS driver Romain Gantois
2023-11-14  9:07 ` [PATCH net-next v2 6/8] net: phy: add calibration callbacks to phy_driver Romain Gantois
2023-11-14  9:07 ` [PATCH net-next v2 7/8] net: qualcomm: ipqess: add a PSGMII calibration procedure to the IPQESS driver Romain Gantois
2023-11-14  9:07 ` Romain Gantois [this message]
     [not found] ` <20231114090743.865453-4-romain.gantois@bootlin.com>
2023-11-14 10:24   ` [PATCH net-next v2 3/8] net: qualcomm: ipqess: introduce the Qualcomm " Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231114090743.865453-9-romain.gantois@bootlin.com \
    --to=romain.gantois@bootlin.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=luka.perkov@sartura.hr \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robert.marko@sartura.hr \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox