[PATCH 1/8] arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux

[PATCH 1/8] arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0be642bc1b86d..d630cbe6d7eb9 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -51,10 +51,11 @@ chipid@14 {
 			reg = <0x00000014 0x4>;
 		};
 
-		serdes_ln_ctrl: mux-controller {
-			compatible = "mmio-mux";
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "reg-mux";
+			reg = <0x4080 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
+			mux-reg-masks = <0x0 0x3>; /* SERDES0 lane0 select */
 		};
 
 		phy_gmii_sel: phy@4044 {
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/8] arm64: dts: ti: k3-am65: Convert serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 5ebb87f467de5..85211123cdf31 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -490,11 +490,12 @@ serdes1_clk: clock@4090 {
 			reg = <0x00004090 0x4>;
 		};
 
-		serdes_mux: mux-controller {
-			compatible = "mmio-mux";
+		serdes_mux: mux-controller@4080 {
+			compatible = "reg-mux";
+			reg = <0x4080 0x14>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
-					<0x4090 0x3>; /* SERDES1 lane select */
+			mux-reg-masks = <0x0 0x3>, /* SERDES0 lane select */
+					<0x10 0x3>; /* SERDES1 lane select */
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/8] arm64: dts: ti: k3-j7200: Convert serdes_ln_ctrl node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 264913f832876..1254ded513b22 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -34,9 +34,10 @@ scm_conf: scm-conf@100000 {
 
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
+			reg = <0x4080 0x20>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */
 		};
 
 		cpsw0_phy_gmii_sel: phy@4044 {
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/8] arm64: dts: ti: k3-j7200: Convert usb_serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 1254ded513b22..daa61ee56bedc 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -49,8 +49,9 @@ cpsw0_phy_gmii_sel: phy@4044 {
 
 		usb_serdes_mux: mux-controller@4000 {
 			compatible = "mmio-mux";
+			reg = <0x4000 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
 		};
 	};
 
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/8] arm64: dts: ti: k3-j721e: Convert serdes_ln_ctrl node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 746b9f8b1c640..d3d9b81fd5a08 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -45,15 +45,15 @@ scm_conf: scm-conf@100000 {
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
 		serdes_ln_ctrl: mux-controller@4080 {
-			compatible = "mmio-mux";
-			reg = <0x00004080 0x50>;
+			compatible = "reg-mux";
+			reg = <0x4080 0x50>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
-					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
-					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
-					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
-					/* SERDES4 lane0/1/2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
+					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
+					<0x30 0x3>, <0x34 0x3>, /* SERDES3 lane0/1 select */
+					<0x40 0x3>, <0x44 0x3>, /* SERDES4 lane0/1 select */
+					<0x48 0x3>, <0x4c 0x3>; /* SERDES4 lane2/3 select */
 			idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
 				      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
 				      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/8] arm64: dts: ti: k3-j721e: Convert usb_serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index d3d9b81fd5a08..f46990b9a994e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -70,10 +70,11 @@ cpsw0_phy_gmii_sel: phy@4044 {
 		};
 
 		usb_serdes_mux: mux-controller@4000 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
+			reg = <0x4000 0x20>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
-					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+			mux-reg-masks = <0x0 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x10 0x8000000>; /* USB1 to SERDES1/2 mux */
 		};
 
 		ehrpwm_tbclk: clock-controller@4140 {
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/8] arm64: dts: ti: k3-j721s2: Convert usb_serdes_mux node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b03731b53a263..e5597724076c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -45,7 +45,7 @@ scm_conf: syscon@104000 {
 		ranges = <0x00 0x00 0x00104000 0x18000>;
 
 		usb_serdes_mux: mux-controller@0 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
 			reg = <0x0 0x4>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 8/8] arm64: dts: ti: k3-j721s2: Convert serdes_ln_ctrl node into reg-mux

[Andrew Davis]

This removes a dependency on the parent node being a syscon node.
Convert from mmio-mux to reg-mux adjusting node name and properties
as needed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index e5597724076c4..918c3e96b1e9e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -58,11 +58,11 @@ phy_gmii_sel_cpsw: phy@34 {
 		};
 
 		serdes_ln_ctrl: mux-controller@80 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
 			reg = <0x80 0x10>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
-					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */
 		};
 
 		ehrpwm_tbclk: clock-controller@140 {
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/8] arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux

[Andrew Davis]

On 11/17/23 4:29 PM, Andrew Davis wrote:
> This removes a dependency on the parent node being a syscon node.
> Convert from mmio-mux to reg-mux adjusting node name and properties
> as needed.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---

This series depends on this driver fix[0].

Andrew

[0] https://lore.kernel.org/lkml/20231025161247.1283319-1-afd@ti.com/

>   arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 0be642bc1b86d..d630cbe6d7eb9 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -51,10 +51,11 @@ chipid@14 {
>   			reg = <0x00000014 0x4>;
>   		};
>   
> -		serdes_ln_ctrl: mux-controller {
> -			compatible = "mmio-mux";
> +		serdes_ln_ctrl: mux-controller@4080 {
> +			compatible = "reg-mux";
> +			reg = <0x4080 0x4>;
>   			#mux-control-cells = <1>;
> -			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
> +			mux-reg-masks = <0x0 0x3>; /* SERDES0 lane0 select */
>   		};
>   
>   		phy_gmii_sel: phy@4044 {

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel