From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Stefan Wahren <wahrenst@gmx.net>
Cc: Umang Jain <umang.jain@ideasonboard.com>,
linux-media@vger.kernel.org, kernel-list@raspberrypi.com,
linux-kernel@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-staging@lists.linux.dev,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
"Ricardo B . Marliere" <ricardo@marliere.net>,
Dan Carpenter <error27@gmail.com>,
Naushir Patuck <naush@raspberrypi.com>
Subject: Re: [PATCH v2 10/15] staging: vc04_services: bcm2835-isp: Add a more complex ISP processing component
Date: Sat, 18 Nov 2023 20:56:38 +0200 [thread overview]
Message-ID: <20231118185638.GJ20846@pendragon.ideasonboard.com> (raw)
In-Reply-To: <414ba478-3a96-48e6-a3a7-88c920a20960@gmx.net>
Hi Stefan,
On Sat, Nov 18, 2023 at 03:53:41PM +0100, Stefan Wahren wrote:
> Am 09.11.23 um 22:03 schrieb Umang Jain:
> > From: Naushir Patuck <naush@raspberrypi.com>
> >
> > Driver for the BCM2835 ISP hardware block. This driver uses the MMAL
> > component to program the ISP hardware through the VC firmware.
> >
> > The ISP component can produce two video stream outputs, and Bayer
> > image statistics. This can't be encompassed in a simple V4L2
> > M2M device, so create a new device that registers 4 video nodes.
>
> sorry, i don't have much knowledge about V4L2, so someone else should
> review this in depth.
>
> But from my PoV, patch 11, 12, 13 and 15 should be squash into this one.
For 11 and 12, I agree. 13 is a bit of a workaround for a missing
feature in V4L2, and while it's acceptable today, having it as a
separate commit may make it easier to revert it in the future when the
V4L2 API will be extended (that may or may not happen, and I wouldn't
count on it happening quickly in any case). I would keep patch 15
separate as it's not part of this driver.
> > Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
> > Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
> > ---
> > MAINTAINERS | 9 +
> > drivers/staging/vc04_services/Kconfig | 2 +
> > drivers/staging/vc04_services/Makefile | 1 +
> > .../staging/vc04_services/bcm2835-isp/Kconfig | 14 +
> > .../vc04_services/bcm2835-isp/Makefile | 4 +
> > .../bcm2835-isp/bcm2835-isp-ctrls.h | 72 +
> > .../bcm2835-isp/bcm2835-isp-fmts.h | 482 +++++
> > .../bcm2835-isp/bcm2835-v4l2-isp.c | 1712 +++++++++++++++++
> > .../vc04_services/vchiq-mmal/mmal-encodings.h | 4 +
> > .../vchiq-mmal/mmal-parameters.h | 165 +-
> > include/uapi/linux/bcm2835-isp.h | 27 +
> > 11 files changed, 2491 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/staging/vc04_services/bcm2835-isp/Kconfig
> > create mode 100644 drivers/staging/vc04_services/bcm2835-isp/Makefile
> > create mode 100644 drivers/staging/vc04_services/bcm2835-isp/bcm2835-isp-ctrls.h
> > create mode 100644 drivers/staging/vc04_services/bcm2835-isp/bcm2835-isp-fmts.h
> > create mode 100644 drivers/staging/vc04_services/bcm2835-isp/bcm2835-v4l2-isp.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 0748cc15588c..8670a8d95400 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -3976,6 +3976,15 @@ F: Documentation/devicetree/bindings/mips/brcm/
> > F: arch/mips/bcm47xx/*
> > F: arch/mips/include/asm/mach-bcm47xx/*
> >
> > +BROADCOM BCM2835 ISP DRIVER
> > +M: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
> > +L: linux-media@vger.kernel.org
> > +S: Maintained
> > +F: Documentation/media/uapi/v4l/pixfmt-meta-bcm2835-isp-stats.rst
> > +F: Documentation/media/v4l-drivers/bcm2835-isp.rst
> > +F: drivers/staging/vc04_services/bcm2835-isp
> > +F: include/uapi/linux/bcm2835-isp.h
> > +
> > BROADCOM BCM4908 ETHERNET DRIVER
> > M: Rafał Miłecki <rafal@milecki.pl>
> > R: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
> > diff --git a/drivers/staging/vc04_services/Kconfig b/drivers/staging/vc04_services/Kconfig
> > index 6c0e77d64376..e71e5a8b820a 100644
> > --- a/drivers/staging/vc04_services/Kconfig
> > +++ b/drivers/staging/vc04_services/Kconfig
> > @@ -44,6 +44,8 @@ source "drivers/staging/vc04_services/bcm2835-audio/Kconfig"
> >
> > source "drivers/staging/vc04_services/bcm2835-camera/Kconfig"
> >
> > +source "drivers/staging/vc04_services/bcm2835-isp/Kconfig"
> > +
> > source "drivers/staging/vc04_services/vchiq-mmal/Kconfig"
> >
> > source "drivers/staging/vc04_services/vc-sm-cma/Kconfig"
> > diff --git a/drivers/staging/vc04_services/Makefile b/drivers/staging/vc04_services/Makefile
> > index 1f61a263f22d..2cebf92525a0 100644
> > --- a/drivers/staging/vc04_services/Makefile
> > +++ b/drivers/staging/vc04_services/Makefile
> > @@ -16,3 +16,4 @@ obj-$(CONFIG_SND_BCM2835) += bcm2835-audio/
> > obj-$(CONFIG_VIDEO_BCM2835) += bcm2835-camera/
> > obj-$(CONFIG_BCM2835_VCHIQ_MMAL) += vchiq-mmal/
> > obj-$(CONFIG_BCM_VC_SM_CMA) += vc-sm-cma/
> > +obj-$(CONFIG_VIDEO_ISP_BCM2835) += bcm2835-isp/
> > diff --git a/drivers/staging/vc04_services/bcm2835-isp/Kconfig b/drivers/staging/vc04_services/bcm2835-isp/Kconfig
> > new file mode 100644
> > index 000000000000..6222799ebe16
> > --- /dev/null
> > +++ b/drivers/staging/vc04_services/bcm2835-isp/Kconfig
> > @@ -0,0 +1,14 @@
> > +config VIDEO_ISP_BCM2835
> > + tristate "BCM2835 ISP support"
> > + depends on MEDIA_SUPPORT
> > + depends on VIDEO_DEV && (ARCH_BCM2835 || COMPILE_TEST)
> > + depends on MEDIA_CONTROLLER
> > + select BCM2835_VCHIQ_MMAL
> > + select VIDEOBUF2_DMA_CONTIG
> > + help
> > + This is the V4L2 driver for the Broadcom BCM2835 ISP hardware.
>
> I think the description is not helpful for all users. Not everybody
> knows what ISP is for. Please describe it more for an end user.
>
> > + This operates over the VCHIQ interface to a service running on
> > + VideoCore.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called bcm2835-isp.
--
Regards,
Laurent Pinchart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-18 18:57 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-09 21:02 [PATCH v2 00/15] staging: vc04_services: bcm2835-isp support Umang Jain
2023-11-09 21:02 ` [PATCH v2 01/15] staging: vc04_services: Add new vc-sm-cma driver Umang Jain
2023-11-13 17:56 ` Stefan Wahren
2023-11-15 19:56 ` Laurent Pinchart
2023-11-15 20:48 ` Stefan Wahren
2023-11-20 9:52 ` Dan Carpenter
2023-11-09 21:02 ` [PATCH v2 02/15] staging: vc04_services: vchiq_arm: Register vcsm-cma driver Umang Jain
2023-11-14 19:32 ` Stefan Wahren
2023-11-09 21:02 ` [PATCH v2 03/15] media: videobuf2: Allow exporting of a struct dmabuf Umang Jain
2023-11-14 19:41 ` Stefan Wahren
2023-11-15 19:31 ` Laurent Pinchart
2023-11-15 21:00 ` Stefan Wahren
2023-11-09 21:02 ` [PATCH v2 04/15] staging: mmal-vchiq: Add support for event callbacks Umang Jain
2023-11-20 10:00 ` Dan Carpenter
2023-11-09 21:02 ` [PATCH v2 05/15] staging: mmal-vchiq: Use vc-sm-cma to support zero copy Umang Jain
2023-11-15 19:03 ` Stefan Wahren
2023-11-15 19:27 ` Laurent Pinchart
2023-11-09 21:02 ` [PATCH v2 06/15] staging: mmal_vchiq: Add image formats to be used by bcm2835-isp Umang Jain
2023-11-09 21:02 ` [PATCH v2 07/15] media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type Umang Jain
2023-11-18 13:11 ` Stefan Wahren
2023-11-09 21:03 ` [PATCH v2 08/15] uapi: bcm2835-isp: Add bcm2835-isp uapi header file Umang Jain
2023-11-09 21:03 ` [PATCH v2 09/15] staging: vc04_services: Add helpers for vchiq driver data Umang Jain
2023-11-18 14:43 ` Stefan Wahren
2023-11-09 21:03 ` [PATCH v2 10/15] staging: vc04_services: bcm2835-isp: Add a more complex ISP processing component Umang Jain
2023-11-13 14:07 ` [PATCH] fixup! " Umang Jain
2023-11-13 15:25 ` Stefan Wahren
2023-11-23 12:56 ` Greg KH
2023-11-23 13:53 ` Laurent Pinchart
2023-11-18 14:53 ` [PATCH v2 10/15] " Stefan Wahren
2023-11-18 18:56 ` Laurent Pinchart [this message]
2023-11-19 12:02 ` Stefan Wahren
2023-11-20 10:33 ` Dan Carpenter
2023-11-09 21:03 ` [PATCH v2 11/15] vc04_services: bcm2835-isp: Allow formats with different colour spaces Umang Jain
2023-11-09 21:03 ` [PATCH v2 12/15] vc04_services: bcm2835-isp: Permit all sRGB colour spaces on ISP outputs Umang Jain
2023-11-09 21:03 ` [PATCH v2 13/15] staging: vc04_services: bcm2835_isp: Allow multiple users Umang Jain
2023-11-09 21:03 ` [PATCH v2 14/15] docs: admin-guide: media: bcm2835-isp: Add documentation for bcm2835-isp Umang Jain
2023-11-09 21:03 ` [PATCH v2 15/15] staging: vc04_services: vchiq: Register bcm2835-isp Umang Jain
2023-11-10 10:32 ` [PATCH v2 00/15] staging: vc04_services: bcm2835-isp support Stefan Wahren
2023-11-13 13:38 ` Umang Jain
2023-11-13 15:09 ` Stefan Wahren
2023-11-15 19:59 ` Laurent Pinchart
2023-11-15 20:57 ` Stefan Wahren
2023-11-16 0:50 ` Laurent Pinchart
2023-11-16 10:54 ` Ivan T. Ivanov
2023-11-16 10:57 ` Peter Robinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231118185638.GJ20846@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=error27@gmail.com \
--cc=kernel-list@raspberrypi.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=naush@raspberrypi.com \
--cc=ricardo@marliere.net \
--cc=umang.jain@ideasonboard.com \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox