Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Neha Malcom Francis <n-francis@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>, <a-nandan@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<eblanc@baylibre.com>, <jneanne@baylibre.com>,
	<aseketeli@baylibre.com>, <jpanis@baylibre.com>,
	<u-kumar1@ti.com>, <j-luthra@ti.com>, <vaishnav.a@ti.com>,
	<hnagalla@ti.com>, <devarsht@ti.com>, <n-francis@ti.com>
Subject: [PATCH v7 0/4] Add TPS6594 PMIC support on several boards
Date: Wed, 22 Nov 2023 16:15:09 +0530	[thread overview]
Message-ID: <20231122104513.2335757-1-n-francis@ti.com> (raw)

TPS6594 is a Power Management IC which provides regulators and others
features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can
communicate through the I2C or SPI interfaces.
TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.

This series adds device tree nodes for TI TPS6594 PMICs found in the
following boards:
- J721EXSOMXEVM:
  Link: https://www.ti.com/tool/J721EXSOMXEVM
- J721S2XSOMXEVM:
  Link: https://www.ti.com/tool/J721S2XSOMXEVM
- J7200XSOMXEVM:
  Link: https://www.ti.com/tool/J7200XSOMXEVM
- J784S4XEVM
  Link: https://www.ti.com/tool/J784S4XEVM

Boot Logs:
https://gist.github.com/nehamalcom/384cf594e37739a34f8a08664830e37a

---
Changes from v6:
https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/
- Modify patch series to include only patches not merged (J7)
- Add boot logs for all affected boards

Changes from v5:
https://lore.kernel.org/all/20230809-tps6594-v5-0-485fd3d63670@ti.com
- Range-diff: http://0x0.st/H_fD.diff
- Reword the patch fixing interrupt ranges for mcu domain gpio intr, and
  add Fixes: tag
- Also fix interrupt ranges for main domain gpio intr in the same patch
- Change pinctrl node names to end in -pins to fix dtbs_check warnings
- (New Patch) Enable TPS6594 in defconfig

Changes from v4:
https://lore.kernel.org/all/20230727130908.10656-1-eblanc@baylibre.com/
- Range-diff: https://0x0.st/H_L7.diff
- Rebased on top of linux-next
- Fix min voltage on vdd_usb_3v3 regulator (ldo2) on j721e-som
- Use 3-hex-digit format for pinctrl values

Changes from v3:
https://lore.kernel.org/all/20230417154832.216774-1-eblanc@baylibre.com/
- Rebased on top of v6.5-rc1.
- Change pinctrl number for irq pin as wkup_pmx0 was split on some boards.
- Use already present wkup_i2c0 node instead of creating a new one.

Changes from v2:
https://lore.kernel.org/lkml/20230414112843.1358067-1-eblanc@baylibre.com/
- Change node name as per Krzysztof review.
- Add a fix for the interrupt range of wakeup gpio used by TPS6594 pmic
  on J784S4.
  The interruptions of the PMIC were not working before that.
- Remove dependencies on other patch series as that was a mistake, see
  https://lore.kernel.org/lkml/CRYY2V3HJ0CP.96JQ18PLZB3C@burritosblues/

Changes from v1:
https://lore.kernel.org/lkml/20230329142948.833800-1-eblanc@baylibre.com/
- Harmonize regulators names across the different boards.
- Adjust AVS voltage range.
- Remove some outdated comments.
- Add PMIC to J784S4 board.
- Compatible string modified to match dt-bindings.
- Add gpio-controller and gpio-cells properties.

Esteban Blanc (2):
  arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs
  arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs

Jerome Neanne (2):
  arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs
  arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC

 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi  | 157 +++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi  | 163 +++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 199 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts     | 104 ++++++++++
 4 files changed, 623 insertions(+)

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-11-22 10:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-22 10:45 Neha Malcom Francis [this message]
2023-11-22 10:45 ` [PATCH v7 1/4] arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs Neha Malcom Francis
2023-11-22 10:45 ` [PATCH v7 2/4] arm64: dts: ti: k3-j721s2-som-p0: " Neha Malcom Francis
2023-11-22 10:45 ` [PATCH v7 3/4] arm64: dts: ti: k3-j721e-som-p0: " Neha Malcom Francis
2023-11-22 10:45 ` [PATCH v7 4/4] arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC Neha Malcom Francis
2023-11-23  7:24 ` [PATCH v7 0/4] Add TPS6594 PMIC support on several boards Nishanth Menon
2023-11-23  7:29   ` Neha Malcom Francis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231122104513.2335757-1-n-francis@ti.com \
    --to=n-francis@ti.com \
    --cc=a-nandan@ti.com \
    --cc=aseketeli@baylibre.com \
    --cc=conor+dt@kernel.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eblanc@baylibre.com \
    --cc=hnagalla@ti.com \
    --cc=j-luthra@ti.com \
    --cc=jneanne@baylibre.com \
    --cc=jpanis@baylibre.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vaishnav.a@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox