* [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
@ 2023-11-18 4:27 ` Georgi Djakov
2023-11-20 15:36 ` Andrew Halaney
2023-11-27 18:13 ` Rob Herring
2023-11-18 4:27 ` [PATCH v2 2/6] iommu/arm-smmu-qcom: Add support for TBUs Georgi Djakov
` (5 subsequent siblings)
6 siblings, 2 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-18 4:27 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
of the SMMU-500, that consists of a single TCU (Translation Control
Unit) and multiple TBUs (Translation Buffer Units). The TCU is already
being described in the generic SMMU DT schema. Add also bindings for
the TBUs to describe their properties and resources that needs to be
managed in order to operate them.
In this DT schema, the TBUs are modelled as child devices of the TCU
and each of them is described with it's register space, clocks, power
domains, interconnects etc.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
---
.../devicetree/bindings/iommu/arm,smmu.yaml | 25 ++++++
.../bindings/iommu/qcom,qsmmuv500-tbu.yaml | 89 +++++++++++++++++++
2 files changed, 114 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index aa9e1c0895a5..f7f89be5f7a3 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -231,6 +231,18 @@ properties:
enabled for any given device.
$ref: /schemas/types.yaml#/definitions/phandle
+ '#address-cells':
+ enum: [ 1, 2 ]
+
+ '#size-cells':
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+patternProperties:
+ "^tbu@[0-9a-f]*":
+ type: object
+
required:
- compatible
- reg
@@ -453,6 +465,19 @@ allOf:
- description: Voter clock required for HLOS SMMU access
- description: Interface clock required for register access
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,smmu-500
+ then:
+ patternProperties:
+ "^tbu@[0-9a-f]*":
+ $ref: qcom,qsmmuv500-tbu.yaml
+ unevaluatedProperties: false
+ properties:
+ ranges: true
+
# Disallow clocks for all other platforms with specific compatibles
- if:
properties:
diff --git a/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
new file mode 100644
index 000000000000..4dc9d0ca33c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,qsmmuv500-tbu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TBU (Translation Buffer Unit)
+
+maintainers:
+ - Georgi Djakov <quic_c_gdjako@quicinc.com>
+
+description:
+ The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
+ a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
+ debug features to trace and trigger debug transactions. There are multiple TBU
+ instances distributes with each client core.
+
+properties:
+ $nodename:
+ pattern: "^tbu@[0-9a-f]+$"
+
+ compatible:
+ const: qcom,qsmmuv500-tbu
+
+ reg:
+ items:
+ - description: Address and size of the TBU's register space.
+
+ reg-names:
+ items:
+ - const: base
+
+ clocks:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ qcom,stream-id-range:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Stream ID range (address and size) that is assigned by the TBU
+ items:
+ minItems: 2
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - interconnects
+ - qcom,stream-id-range
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
+ reg = <0x15000000 0x80000>;
+ ranges = <0 0 0 0 0xffffffff>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ anoc_1_pcie_tbu: tbu@150e1000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150e1000 0x0 0x1000>;
+ reg-names = "base";
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+ qcom,stream-id-range = <0x1c00 0x400>;
+ };
+ };
+
+...
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings
2023-11-18 4:27 ` [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings Georgi Djakov
@ 2023-11-20 15:36 ` Andrew Halaney
2023-11-27 18:13 ` Rob Herring
1 sibling, 0 replies; 12+ messages in thread
From: Andrew Halaney @ 2023-11-20 15:36 UTC (permalink / raw)
To: Georgi Djakov
Cc: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro, devicetree, andersson, konrad.dybcio, linux-arm-kernel,
iommu, linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
On Fri, Nov 17, 2023 at 08:27:25PM -0800, Georgi Djakov wrote:
> The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
> of the SMMU-500, that consists of a single TCU (Translation Control
> Unit) and multiple TBUs (Translation Buffer Units). The TCU is already
> being described in the generic SMMU DT schema. Add also bindings for
nit for if you respin: s/Add also/Add/ or similar :)
> the TBUs to describe their properties and resources that needs to be
> managed in order to operate them.
>
> In this DT schema, the TBUs are modelled as child devices of the TCU
> and each of them is described with it's register space, clocks, power
> domains, interconnects etc.
>
> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
> ---
> .../devicetree/bindings/iommu/arm,smmu.yaml | 25 ++++++
> .../bindings/iommu/qcom,qsmmuv500-tbu.yaml | 89 +++++++++++++++++++
> 2 files changed, 114 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> index aa9e1c0895a5..f7f89be5f7a3 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> @@ -231,6 +231,18 @@ properties:
> enabled for any given device.
> $ref: /schemas/types.yaml#/definitions/phandle
>
> + '#address-cells':
> + enum: [ 1, 2 ]
> +
> + '#size-cells':
> + enum: [ 1, 2 ]
> +
> + ranges: true
> +
> +patternProperties:
> + "^tbu@[0-9a-f]*":
> + type: object
> +
> required:
> - compatible
> - reg
> @@ -453,6 +465,19 @@ allOf:
> - description: Voter clock required for HLOS SMMU access
> - description: Interface clock required for register access
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,smmu-500
> + then:
> + patternProperties:
> + "^tbu@[0-9a-f]*":
> + $ref: qcom,qsmmuv500-tbu.yaml
> + unevaluatedProperties: false
> + properties:
> + ranges: true
> +
> # Disallow clocks for all other platforms with specific compatibles
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
> new file mode 100644
> index 000000000000..4dc9d0ca33c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
> @@ -0,0 +1,89 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iommu/qcom,qsmmuv500-tbu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm TBU (Translation Buffer Unit)
> +
> +maintainers:
> + - Georgi Djakov <quic_c_gdjako@quicinc.com>
> +
> +description:
> + The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
> + a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
> + debug features to trace and trigger debug transactions. There are multiple TBU
> + instances distributes with each client core.
> +
> +properties:
> + $nodename:
> + pattern: "^tbu@[0-9a-f]+$"
> +
> + compatible:
> + const: qcom,qsmmuv500-tbu
> +
> + reg:
> + items:
> + - description: Address and size of the TBU's register space.
> +
> + reg-names:
> + items:
> + - const: base
> +
> + clocks:
> + maxItems: 1
> +
> + interconnects:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + qcom,stream-id-range:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: Stream ID range (address and size) that is assigned by the TBU
> + items:
> + minItems: 2
> + maxItems: 2
> +
> +required:
> + - compatible
> + - reg
> + - interconnects
> + - qcom,stream-id-range
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + #include <dt-bindings/interconnect/qcom,icc.h>
> + #include <dt-bindings/interconnect/qcom,sdm845.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + apps_smmu: iommu@15000000 {
> + compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
> + reg = <0x15000000 0x80000>;
> + ranges = <0 0 0 0 0xffffffff>;
> + #iommu-cells = <2>;
> + #global-interrupts = <1>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + anoc_1_pcie_tbu: tbu@150e1000 {
> + compatible = "qcom,qsmmuv500-tbu";
> + reg = <0x0 0x150e1000 0x0 0x1000>;
> + reg-names = "base";
> + clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
> + interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
> + power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
> + qcom,stream-id-range = <0x1c00 0x400>;
> + };
> + };
> +
> +...
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings
2023-11-18 4:27 ` [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings Georgi Djakov
2023-11-20 15:36 ` Andrew Halaney
@ 2023-11-27 18:13 ` Rob Herring
2023-11-30 23:24 ` Georgi Djakov
1 sibling, 1 reply; 12+ messages in thread
From: Rob Herring @ 2023-11-27 18:13 UTC (permalink / raw)
To: Georgi Djakov
Cc: krzysztof.kozlowski+dt, conor+dt, will, robin.murphy, joro,
devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
On Fri, Nov 17, 2023 at 08:27:25PM -0800, Georgi Djakov wrote:
> The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
> of the SMMU-500, that consists of a single TCU (Translation Control
> Unit) and multiple TBUs (Translation Buffer Units). The TCU is already
> being described in the generic SMMU DT schema. Add also bindings for
> the TBUs to describe their properties and resources that needs to be
> managed in order to operate them.
>
> In this DT schema, the TBUs are modelled as child devices of the TCU
> and each of them is described with it's register space, clocks, power
> domains, interconnects etc.
>
> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
> ---
> .../devicetree/bindings/iommu/arm,smmu.yaml | 25 ++++++
> .../bindings/iommu/qcom,qsmmuv500-tbu.yaml | 89 +++++++++++++++++++
> 2 files changed, 114 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> index aa9e1c0895a5..f7f89be5f7a3 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> @@ -231,6 +231,18 @@ properties:
> enabled for any given device.
> $ref: /schemas/types.yaml#/definitions/phandle
>
> + '#address-cells':
> + enum: [ 1, 2 ]
> +
> + '#size-cells':
> + enum: [ 1, 2 ]
> +
> + ranges: true
> +
> +patternProperties:
> + "^tbu@[0-9a-f]*":
> + type: object
> +
> required:
> - compatible
> - reg
> @@ -453,6 +465,19 @@ allOf:
> - description: Voter clock required for HLOS SMMU access
> - description: Interface clock required for register access
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,smmu-500
Doesn't match your example. No failure either, so there's some problem
with your schema. The issue is the tbu@ entry above has no constraint on
child properties. Dropping it would solve the issue. However, having a
TBU is not QCom specific, so that doesn't feel right.
> + then:
> + patternProperties:
> + "^tbu@[0-9a-f]*":
'+' rather than '*' as 1 is the minimum, not 0.
> + $ref: qcom,qsmmuv500-tbu.yaml
> + unevaluatedProperties: false
> + properties:
> + ranges: true
> +
> # Disallow clocks for all other platforms with specific compatibles
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
> new file mode 100644
> index 000000000000..4dc9d0ca33c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
> @@ -0,0 +1,89 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iommu/qcom,qsmmuv500-tbu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm TBU (Translation Buffer Unit)
> +
> +maintainers:
> + - Georgi Djakov <quic_c_gdjako@quicinc.com>
> +
> +description:
> + The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
> + a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
> + debug features to trace and trigger debug transactions. There are multiple TBU
> + instances distributes with each client core.
> +
> +properties:
> + $nodename:
> + pattern: "^tbu@[0-9a-f]+$"
Drop. You defined this in the parent already.
> +
> + compatible:
> + const: qcom,qsmmuv500-tbu
> +
> + reg:
> + items:
> + - description: Address and size of the TBU's register space.
> +
> + reg-names:
> + items:
> + - const: base
Not a useful name. Drop.
> +
> + clocks:
> + maxItems: 1
> +
> + interconnects:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + qcom,stream-id-range:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: Stream ID range (address and size) that is assigned by the TBU
> + items:
> + minItems: 2
> + maxItems: 2
Perhaps implementations other than QCom's needs this?
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings
2023-11-27 18:13 ` Rob Herring
@ 2023-11-30 23:24 ` Georgi Djakov
0 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-30 23:24 UTC (permalink / raw)
To: Rob Herring
Cc: krzysztof.kozlowski+dt, conor+dt, will, robin.murphy, joro,
devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
Hi Rob,
Thanks for the feedback!
On 11/27/2023 8:13 PM, Rob Herring wrote:
> On Fri, Nov 17, 2023 at 08:27:25PM -0800, Georgi Djakov wrote:
>> The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
>> of the SMMU-500, that consists of a single TCU (Translation Control
>> Unit) and multiple TBUs (Translation Buffer Units). The TCU is already
>> being described in the generic SMMU DT schema. Add also bindings for
>> the TBUs to describe their properties and resources that needs to be
>> managed in order to operate them.
>>
>> In this DT schema, the TBUs are modelled as child devices of the TCU
>> and each of them is described with it's register space, clocks, power
>> domains, interconnects etc.
>>
>> Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
>> ---
>> .../devicetree/bindings/iommu/arm,smmu.yaml | 25 ++++++
>> .../bindings/iommu/qcom,qsmmuv500-tbu.yaml | 89 +++++++++++++++++++
>> 2 files changed, 114 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>> index aa9e1c0895a5..f7f89be5f7a3 100644
>> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>> @@ -231,6 +231,18 @@ properties:
>> enabled for any given device.
>> $ref: /schemas/types.yaml#/definitions/phandle
>>
>> + '#address-cells':
>> + enum: [ 1, 2 ]
>> +
>> + '#size-cells':
>> + enum: [ 1, 2 ]
>> +
>> + ranges: true
>> +
>> +patternProperties:
>> + "^tbu@[0-9a-f]*":
>> + type: object
>> +
>> required:
>> - compatible
>> - reg
>> @@ -453,6 +465,19 @@ allOf:
>> - description: Voter clock required for HLOS SMMU access
>> - description: Interface clock required for register access
>>
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,smmu-500
>
> Doesn't match your example. No failure either, so there's some problem
> with your schema. The issue is the tbu@ entry above has no constraint on
> child properties. Dropping it would solve the issue. However, having a
> TBU is not QCom specific, so that doesn't feel right.
Having a TBU is not Qcom specific. The ARM MMU-500 implementation for example has TBUs, but the registers are within the SMMU address space, there are no clocks, no power-domains or other resources. Not sure about other implementations. So should we just allow empty tbu child nodes with no properties?
>> + then:
>> + patternProperties:
>> + "^tbu@[0-9a-f]*":
>
> '+' rather than '*' as 1 is the minimum, not 0.
Ok.
>> + $ref: qcom,qsmmuv500-tbu.yaml
>> + unevaluatedProperties: false
>> + properties:
>> + ranges: true
>> +
>> # Disallow clocks for all other platforms with specific compatibles
>> - if:
>> properties:
>> diff --git a/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
>> new file mode 100644
>> index 000000000000..4dc9d0ca33c9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iommu/qcom,qsmmuv500-tbu.yaml
>> @@ -0,0 +1,89 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iommu/qcom,qsmmuv500-tbu.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm TBU (Translation Buffer Unit)
>> +
>> +maintainers:
>> + - Georgi Djakov <quic_c_gdjako@quicinc.com>
>> +
>> +description:
>> + The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
>> + a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
>> + debug features to trace and trigger debug transactions. There are multiple TBU
>> + instances distributes with each client core.
>> +
>> +properties:
>> + $nodename:
>> + pattern: "^tbu@[0-9a-f]+$"
>
> Drop. You defined this in the parent already.
Ok.
>> +
>> + compatible:
>> + const: qcom,qsmmuv500-tbu
>> +
>> + reg:
>> + items:
>> + - description: Address and size of the TBU's register space.
>> +
>> + reg-names:
>> + items:
>> + - const: base
>
> Not a useful name. Drop.
Agree.
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + interconnects:
>> + maxItems: 1
>> +
>> + power-domains:
>> + maxItems: 1
>> +
>> + qcom,stream-id-range:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + description: Stream ID range (address and size) that is assigned by the TBU
>> + items:
>> + minItems: 2
>> + maxItems: 2
>
> Perhaps implementations other than QCom's needs this?
Yes, maybe. A TBU can service a fixed amount of stream IDs and this looks like something common for all TBUs. I'll drop the vendor prefix.
Thanks,
Georgi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/6] iommu/arm-smmu-qcom: Add support for TBUs
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings Georgi Djakov
@ 2023-11-18 4:27 ` Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 3/6] iommu/arm-smmu-qcom: Add Qualcomm TBU driver Georgi Djakov
` (4 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-18 4:27 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
The ARM MMU-500 implements a Translation Buffer Unit (TBU) for each
connected master besides a single TCU which controls and manages the
address translations.
Allow the Qualcomm SMMU driver to probe for any TBU devices that can
provide additional debug features like triggering transactions, logging
outstanding transactions, snapshot capture etc. The primary use-case
would be to get information from a TBU and print it during a context
fault.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 8 ++++++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 4 +++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 549ae4dba3a6..1622abace484 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -1,12 +1,14 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
*/
#include <linux/acpi.h>
#include <linux/adreno-smmu-priv.h>
#include <linux/delay.h>
#include <linux/of_device.h>
+#include <linux/of_platform.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include "arm-smmu.h"
@@ -444,6 +446,7 @@ static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
const struct device_node *np = smmu->dev->of_node;
const struct arm_smmu_impl *impl;
struct qcom_smmu *qsmmu;
+ int ret;
if (!data)
return ERR_PTR(-EINVAL);
@@ -467,6 +470,11 @@ static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
qsmmu->smmu.impl = impl;
qsmmu->cfg = data->cfg;
+ INIT_LIST_HEAD(&qsmmu->tbu_list);
+ ret = devm_of_platform_populate(smmu->dev);
+ if (ret)
+ return ERR_PTR(ret);
+
return &qsmmu->smmu;
}
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index 593910567b88..2164a9cf3dde 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef _ARM_SMMU_QCOM_H
@@ -12,6 +12,8 @@ struct qcom_smmu {
bool bypass_quirk;
u8 bypass_cbndx;
u32 stall_enabled;
+ struct mutex tbu_list_lock; /* protects tbu_list */
+ struct list_head tbu_list;
};
enum qcom_smmu_impl_reg_offset {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 3/6] iommu/arm-smmu-qcom: Add Qualcomm TBU driver
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 1/6] dt-bindings: iommu: Add Translation Buffer Unit bindings Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 2/6] iommu/arm-smmu-qcom: Add support for TBUs Georgi Djakov
@ 2023-11-18 4:27 ` Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 4/6] iommu/arm-smmu: Allow using a threaded handler for context interrupts Georgi Djakov
` (3 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-18 4:27 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
Add a driver for the Qualcomm implementation of the MMU-500 TBU.
Operating the TBUs (Translation Buffer Units) from Linux can help
with debugging context faults. The TBUs can provide debug features
such as running ATOS (Address Translation Operations) to manually
trigger address translation of IOVA to physical address in hardware.
The driver will control the resources needed by the TBU to allow
running ATOS on the TBUs or check for outstanding transactions.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
---
drivers/iommu/Kconfig | 8 +
drivers/iommu/arm/arm-smmu/Makefile | 1 +
.../iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c | 366 ++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 2 +
drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 +
5 files changed, 379 insertions(+)
create mode 100644 drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 7673bb82945b..adc5d6161fe8 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -370,6 +370,14 @@ config ARM_SMMU_QCOM
When running on a Qualcomm platform that has the custom variant
of the ARM SMMU, this needs to be built into the SMMU driver.
+config ARM_SMMU_QCOM_TBU
+ bool "Qualcomm TBU driver"
+ depends on ARM_SMMU_QCOM
+ help
+ The SMMU on Qualcomm platform may include a Translation Buffer
+ Units (TBUs) for each master. Enabling support for these will
+ allow operating the TBUs to help debugging context faults.
+
config ARM_SMMU_QCOM_DEBUG
bool "ARM SMMU QCOM implementation defined debug support"
depends on ARM_SMMU_QCOM
diff --git a/drivers/iommu/arm/arm-smmu/Makefile b/drivers/iommu/arm/arm-smmu/Makefile
index 2a5a95e8e3f9..c35ff78fcfd5 100644
--- a/drivers/iommu/arm/arm-smmu/Makefile
+++ b/drivers/iommu/arm/arm-smmu/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o
obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-nvidia.o
arm_smmu-$(CONFIG_ARM_SMMU_QCOM) += arm-smmu-qcom.o
+arm_smmu-$(CONFIG_ARM_SMMU_QCOM_TBU) += arm-smmu-qcom-tbu.o
arm_smmu-$(CONFIG_ARM_SMMU_QCOM_DEBUG) += arm-smmu-qcom-debug.o
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
new file mode 100644
index 000000000000..2ab60f0a4ec2
--- /dev/null
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#include <linux/interconnect.h>
+#include <linux/iopoll.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "arm-smmu.h"
+#include "arm-smmu-qcom.h"
+
+#define TBU_DBG_TIMEOUT_US 100
+#define DEBUG_AXUSER_REG 0x30
+#define DEBUG_AXUSER_CDMID GENMASK_ULL(43, 36)
+#define DEBUG_AXUSER_CDMID_VAL 0xff
+#define DEBUG_PAR_REG 0x28
+#define DEBUG_PAR_FAULT_VAL BIT(0)
+#define DEBUG_PAR_PA GENMASK_ULL(47, 12)
+#define DEBUG_SID_HALT_REG 0x0
+#define DEBUG_SID_HALT_VAL BIT(16)
+#define DEBUG_SID_HALT_SID GENMASK(9, 0)
+#define DEBUG_SR_HALT_ACK_REG 0x20
+#define DEBUG_SR_HALT_ACK_VAL BIT(1)
+#define DEBUG_SR_ECATS_RUNNING_VAL BIT(0)
+#define DEBUG_TXN_AXCACHE GENMASK(5, 2)
+#define DEBUG_TXN_AXPROT GENMASK(8, 6)
+#define DEBUG_TXN_AXPROT_PRIV 0x1
+#define DEBUG_TXN_AXPROT_NSEC 0x2
+#define DEBUG_TXN_TRIGG_REG 0x18
+#define DEBUG_TXN_TRIGGER BIT(0)
+#define DEBUG_VA_ADDR_REG 0x8
+
+struct qsmmuv500_tbu {
+ struct device *dev;
+ struct arm_smmu_device *smmu;
+ u32 sid_range[2];
+ struct list_head list;
+ struct clk *clk;
+ struct icc_path *path;
+ void __iomem *base;
+ spinlock_t halt_lock; /* multiple halt or resume can't execute concurrently */
+ int halt_count;
+};
+
+static DEFINE_SPINLOCK(atos_lock);
+
+static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
+{
+ return container_of(smmu, struct qcom_smmu, smmu);
+}
+
+static struct qsmmuv500_tbu *qsmmuv500_find_tbu(struct qcom_smmu *qsmmu, u32 sid)
+{
+ struct qsmmuv500_tbu *tbu = NULL;
+ u32 start, end;
+
+ mutex_lock(&qsmmu->tbu_list_lock);
+
+ list_for_each_entry(tbu, &qsmmu->tbu_list, list) {
+ start = tbu->sid_range[0];
+ end = start + tbu->sid_range[1];
+
+ if (start <= sid && sid < end)
+ break;
+ }
+
+ mutex_unlock(&qsmmu->tbu_list_lock);
+
+ return tbu;
+}
+
+static int qsmmuv500_tbu_halt(struct qsmmuv500_tbu *tbu, struct arm_smmu_domain *smmu_domain)
+{
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ int ret = 0, idx = smmu_domain->cfg.cbndx;
+ unsigned long flags;
+ u32 val, fsr, status;
+
+ spin_lock_irqsave(&tbu->halt_lock, flags);
+ if (tbu->halt_count) {
+ tbu->halt_count++;
+ goto out;
+ }
+
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val |= DEBUG_SID_HALT_VAL;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if ((fsr & ARM_SMMU_FSR_FAULT) && (fsr & ARM_SMMU_FSR_SS)) {
+ u32 sctlr_orig, sctlr;
+
+ /*
+ * We are in a fault. Our request to halt the bus will not
+ * complete until transactions in front of us (such as the fault
+ * itself) have completed. Disable iommu faults and terminate
+ * any existing transactions.
+ */
+ sctlr_orig = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_SCTLR);
+ sctlr = sctlr_orig & ~(ARM_SMMU_SCTLR_CFCFG | ARM_SMMU_SCTLR_CFIE);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME, ARM_SMMU_RESUME_TERMINATE);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr_orig);
+ }
+
+ if (readl_poll_timeout_atomic(tbu->base + DEBUG_SR_HALT_ACK_REG, status,
+ (status & DEBUG_SR_HALT_ACK_VAL),
+ 0, TBU_DBG_TIMEOUT_US)) {
+ dev_err(tbu->dev, "Timeout while trying to halt TBU!\n");
+ ret = -ETIMEDOUT;
+
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_VAL;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ goto out;
+ }
+
+ tbu->halt_count = 1;
+
+out:
+ spin_unlock_irqrestore(&tbu->halt_lock, flags);
+ return ret;
+}
+
+static void qsmmuv500_tbu_resume(struct qsmmuv500_tbu *tbu)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&tbu->halt_lock, flags);
+ if (!tbu->halt_count) {
+ WARN(1, "%s: halt_count is 0", dev_name(tbu->dev));
+ goto out;
+ }
+
+ if (tbu->halt_count > 1) {
+ tbu->halt_count--;
+ goto out;
+ }
+
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_VAL;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ tbu->halt_count = 0;
+out:
+ spin_unlock_irqrestore(&tbu->halt_lock, flags);
+}
+
+static phys_addr_t qsmmuv500_tbu_trigger_atos(struct arm_smmu_domain *smmu_domain,
+ struct qsmmuv500_tbu *tbu, dma_addr_t iova, u32 sid)
+{
+ bool atos_timedout = false;
+ phys_addr_t phys = 0;
+ ktime_t timeout;
+ u64 val;
+
+ /* Set address and stream-id */
+ val = readq_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_SID;
+ val |= FIELD_PREP(DEBUG_SID_HALT_SID, sid);
+ writeq_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+ writeq_relaxed(iova, tbu->base + DEBUG_VA_ADDR_REG);
+ val = FIELD_PREP(DEBUG_AXUSER_CDMID, DEBUG_AXUSER_CDMID_VAL);
+ writeq_relaxed(val, tbu->base + DEBUG_AXUSER_REG);
+
+ /* Write-back read and write-allocate */
+ val = FIELD_PREP(DEBUG_TXN_AXCACHE, 0xf);
+
+ /* Non-secure access */
+ val |= FIELD_PREP(DEBUG_TXN_AXPROT, DEBUG_TXN_AXPROT_NSEC);
+
+ /* Priviledged access */
+ val |= FIELD_PREP(DEBUG_TXN_AXPROT, DEBUG_TXN_AXPROT_PRIV);
+
+ val |= DEBUG_TXN_TRIGGER;
+ writeq_relaxed(val, tbu->base + DEBUG_TXN_TRIGG_REG);
+
+ timeout = ktime_add_us(ktime_get(), TBU_DBG_TIMEOUT_US);
+ for (;;) {
+ val = readl_relaxed(tbu->base + DEBUG_SR_HALT_ACK_REG);
+ if (!(val & DEBUG_SR_ECATS_RUNNING_VAL))
+ break;
+ val = readl_relaxed(tbu->base + DEBUG_PAR_REG);
+ if (val & DEBUG_PAR_FAULT_VAL)
+ break;
+ if (ktime_compare(ktime_get(), timeout) > 0) {
+ atos_timedout = true;
+ break;
+ }
+ }
+
+ val = readq_relaxed(tbu->base + DEBUG_PAR_REG);
+ if (val & DEBUG_PAR_FAULT_VAL)
+ dev_err(tbu->dev, "ATOS generated a fault interrupt! PAR = %llx, SID=0x%x\n",
+ val, sid);
+ else if (atos_timedout)
+ dev_err_ratelimited(tbu->dev, "ATOS translation timed out!\n");
+ else
+ phys = FIELD_GET(DEBUG_PAR_PA, val);
+
+ /* Reset hardware */
+ writeq_relaxed(0, tbu->base + DEBUG_TXN_TRIGG_REG);
+ writeq_relaxed(0, tbu->base + DEBUG_VA_ADDR_REG);
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_SID;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ return phys;
+}
+
+static phys_addr_t qsmmuv500_iova_to_phys(struct arm_smmu_domain *smmu_domain,
+ dma_addr_t iova, u32 sid)
+{
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
+ int idx = smmu_domain->cfg.cbndx;
+ struct qsmmuv500_tbu *tbu;
+ u32 sctlr_orig, sctlr;
+ phys_addr_t phys = 0;
+ unsigned long flags;
+ int attempt = 0;
+ int ret;
+ u64 fsr;
+
+ tbu = qsmmuv500_find_tbu(qsmmu, sid);
+ if (!tbu)
+ return 0;
+
+ ret = icc_set_bw(tbu->path, 0, UINT_MAX);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(tbu->clk);
+ if (ret)
+ goto disable_icc;
+
+ ret = qsmmuv500_tbu_halt(tbu, smmu_domain);
+ if (ret)
+ goto disable_clk;
+
+ /*
+ * ATOS/ECATS can trigger the fault interrupt, so disable it temporarily
+ * and check for an interrupt manually.
+ */
+ sctlr_orig = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_SCTLR);
+ sctlr = sctlr_orig & ~(ARM_SMMU_SCTLR_CFCFG | ARM_SMMU_SCTLR_CFIE);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if (fsr & ARM_SMMU_FSR_FAULT) {
+ /* Clear pending interrupts */
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+
+ /*
+ * TBU halt takes care of resuming any stalled transcation.
+ * Kept it here for completeness sake.
+ */
+ if (fsr & ARM_SMMU_FSR_SS)
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME,
+ ARM_SMMU_RESUME_TERMINATE);
+ }
+
+ /* Only one concurrent atos operation */
+ spin_lock_irqsave(&atos_lock, flags);
+
+ /*
+ * If the translation fails, attempt the lookup more time."
+ */
+ do {
+ phys = qsmmuv500_tbu_trigger_atos(smmu_domain, tbu, iova, sid);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if (fsr & ARM_SMMU_FSR_FAULT) {
+ /* Clear pending interrupts */
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+
+ if (fsr & ARM_SMMU_FSR_SS)
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME,
+ ARM_SMMU_RESUME_TERMINATE);
+ }
+ } while (!phys && attempt++ < 2);
+
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr_orig);
+ spin_unlock_irqrestore(&atos_lock, flags);
+ qsmmuv500_tbu_resume(tbu);
+
+ /* Read to complete prior write transcations */
+ readl_relaxed(tbu->base + DEBUG_SR_HALT_ACK_REG);
+
+disable_clk:
+ clk_disable_unprepare(tbu->clk);
+disable_icc:
+ icc_set_bw(tbu->path, 0, 0);
+
+ return phys;
+}
+
+static int qsmmuv500_tbu_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct arm_smmu_device *smmu;
+ struct qsmmuv500_tbu *tbu;
+ struct qcom_smmu *qsmmu;
+ int ret;
+
+ smmu = dev_get_drvdata(dev->parent);
+ if (!smmu)
+ return -EPROBE_DEFER;
+
+ qsmmu = to_qcom_smmu(smmu);
+
+ tbu = devm_kzalloc(dev, sizeof(*tbu), GFP_KERNEL);
+ if (!tbu)
+ return -ENOMEM;
+
+ tbu->dev = dev;
+ INIT_LIST_HEAD(&tbu->list);
+ spin_lock_init(&tbu->halt_lock);
+
+ tbu->base = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(tbu->base))
+ return PTR_ERR(tbu->base);
+
+ ret = of_property_read_u32_array(np, "qcom,stream-id-range", tbu->sid_range, 2);
+ if (ret) {
+ dev_err(dev, "The DT property 'qcom,stream-id-range' is mandatory\n");
+ return ret;
+ }
+
+ tbu->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(tbu->clk))
+ return PTR_ERR(tbu->clk);
+
+ tbu->path = devm_of_icc_get(dev, NULL);
+ if (IS_ERR(tbu->path))
+ return PTR_ERR(tbu->path);
+
+ mutex_lock(&qsmmu->tbu_list_lock);
+ list_add_tail(&tbu->list, &qsmmu->tbu_list);
+ mutex_unlock(&qsmmu->tbu_list_lock);
+
+ dev_set_drvdata(dev, tbu);
+
+ return 0;
+}
+
+static const struct of_device_id qsmmuv500_tbu_of_match[] = {
+ { .compatible = "qcom,qsmmuv500-tbu" },
+ { }
+};
+
+static struct platform_driver qsmmuv500_tbu_driver = {
+ .driver = {
+ .name = "qsmmuv500-tbu",
+ .of_match_table = qsmmuv500_tbu_of_match,
+ },
+ .probe = qsmmuv500_tbu_probe,
+};
+builtin_platform_driver(qsmmuv500_tbu_driver);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index 2164a9cf3dde..1c0cf393d04e 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -32,6 +32,8 @@ struct qcom_smmu_match_data {
const struct arm_smmu_impl *adreno_impl;
};
+irqreturn_t qcom_smmu_context_fault(int irq, void *dev);
+
#ifdef CONFIG_ARM_SMMU_QCOM_DEBUG
void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu);
#else
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index 703fd5817ec1..e5df65c0f81a 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -136,6 +136,7 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_CBAR_VMID GENMASK(7, 0)
#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
+#define ARM_SMMU_CBFRSYNRA_SID GENMASK(15, 0)
#define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
#define ARM_SMMU_CBA2R_VMID16 GENMASK(31, 16)
@@ -238,6 +239,7 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_CB_ATSR 0x8f0
#define ARM_SMMU_ATSR_ACTIVE BIT(0)
+#define ARM_SMMU_RESUME_TERMINATE BIT(0)
/* Maximum number of context banks per SMMU */
#define ARM_SMMU_MAX_CBS 128
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 4/6] iommu/arm-smmu: Allow using a threaded handler for context interrupts
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
` (2 preceding siblings ...)
2023-11-18 4:27 ` [PATCH v2 3/6] iommu/arm-smmu-qcom: Add Qualcomm TBU driver Georgi Djakov
@ 2023-11-18 4:27 ` Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 5/6] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845 Georgi Djakov
` (2 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-18 4:27 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
Threaded IRQ handlers run in a less critical context compared to normal
IRQs, so they can perform more complex and time-consuming operations
without causing significant delays in other parts of the kernel.
During a context fault, it might be needed to do more processing and
gather debug information from TBUs in the handler. These operations may
sleep, so add an option to use a threaded IRQ handler in these cases.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
---
drivers/iommu/arm/arm-smmu/arm-smmu.c | 12 ++++++++++--
drivers/iommu/arm/arm-smmu/arm-smmu.h | 1 +
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index d6d1a2a55cc0..a6561bb245ad 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -796,8 +796,16 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
else
context_fault = arm_smmu_context_fault;
- ret = devm_request_irq(smmu->dev, irq, context_fault,
- IRQF_SHARED, "arm-smmu-context-fault", domain);
+ if (smmu->impl && smmu->impl->context_fault_needs_threaded_irq)
+ ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
+ context_fault,
+ IRQF_ONESHOT | IRQF_SHARED,
+ "arm-smmu-context-fault",
+ domain);
+ else
+ ret = devm_request_irq(smmu->dev, irq, context_fault,
+ IRQF_SHARED, "arm-smmu-context-fault", domain);
+
if (ret < 0) {
dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
cfg->irptndx, irq);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index e5df65c0f81a..09f11f942ff8 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -439,6 +439,7 @@ struct arm_smmu_impl {
int (*def_domain_type)(struct device *dev);
irqreturn_t (*global_fault)(int irq, void *dev);
irqreturn_t (*context_fault)(int irq, void *dev);
+ bool context_fault_needs_threaded_irq;
int (*alloc_context_bank)(struct arm_smmu_domain *smmu_domain,
struct arm_smmu_device *smmu,
struct device *dev, int start);
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 5/6] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
` (3 preceding siblings ...)
2023-11-18 4:27 ` [PATCH v2 4/6] iommu/arm-smmu: Allow using a threaded handler for context interrupts Georgi Djakov
@ 2023-11-18 4:27 ` Georgi Djakov
2023-11-18 4:27 ` [PATCH v2 6/6] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs Georgi Djakov
2023-11-18 11:21 ` [PATCH v2 0/6] Add support for Translation Buffer Units Bryan O'Donoghue
6 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-18 4:27 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
The sdm845 platform now supports TBUs, so let's get additional debug
info from the TBUs when a context fault occurs. Implement a custom
context fault handler that does both software + hardware page table
walks and TLB Invalidate All.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
---
.../iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c | 138 ++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 4 +
2 files changed, 142 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
index 2ab60f0a4ec2..a4c7db53067c 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
@@ -52,6 +52,11 @@ static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
return container_of(smmu, struct qcom_smmu, smmu);
}
+static struct arm_smmu_domain *to_smmu_domain(struct iommu_domain *dom)
+{
+ return container_of(dom, struct arm_smmu_domain, domain);
+}
+
static struct qsmmuv500_tbu *qsmmuv500_find_tbu(struct qcom_smmu *qsmmu, u32 sid)
{
struct qsmmuv500_tbu *tbu = NULL;
@@ -301,6 +306,139 @@ static phys_addr_t qsmmuv500_iova_to_phys(struct arm_smmu_domain *smmu_domain,
return phys;
}
+static phys_addr_t qcom_smmu_iova_to_phys_hard(struct iommu_domain *domain, dma_addr_t iova)
+{
+ struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ int idx = smmu_domain->cfg.cbndx;
+ u32 frsynra;
+ u16 sid;
+
+ frsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
+ sid = FIELD_GET(ARM_SMMU_CBFRSYNRA_SID, frsynra);
+
+ return qsmmuv500_iova_to_phys(smmu_domain, iova, sid);
+}
+
+static phys_addr_t qcom_smmu_verify_fault(struct iommu_domain *domain, dma_addr_t iova, u32 fsr)
+{
+ struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ struct io_pgtable *iop = io_pgtable_ops_to_pgtable(smmu_domain->pgtbl_ops);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ phys_addr_t phys_post_tlbiall;
+ phys_addr_t phys;
+
+ phys = qcom_smmu_iova_to_phys_hard(domain, iova);
+ io_pgtable_tlb_flush_all(iop);
+ phys_post_tlbiall = qcom_smmu_iova_to_phys_hard(domain, iova);
+
+ if (phys != phys_post_tlbiall) {
+ dev_err(smmu->dev,
+ "ATOS results differed across TLBIALL... (before: %pa after: %pa)\n",
+ &phys, &phys_post_tlbiall);
+ }
+
+ return (phys == 0 ? phys_post_tlbiall : phys);
+}
+
+irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
+{
+ struct iommu_domain *domain = dev;
+ struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ u32 fsr, fsynr, cbfrsynra, resume = 0;
+ int idx = smmu_domain->cfg.cbndx;
+ phys_addr_t phys_soft;
+ unsigned long iova;
+ int ret, tmp;
+
+ static DEFINE_RATELIMIT_STATE(_rs,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if (!(fsr & ARM_SMMU_FSR_FAULT))
+ return IRQ_NONE;
+
+ fsynr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSYNR0);
+ iova = arm_smmu_cb_readq(smmu, idx, ARM_SMMU_CB_FAR);
+ cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
+
+ phys_soft = ops->iova_to_phys(ops, iova);
+
+ tmp = report_iommu_fault(domain, NULL, iova,
+ fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
+ if (!tmp || tmp == -EBUSY) {
+ dev_dbg(smmu->dev,
+ "Context fault handled by client: iova=0x%08lx, fsr=0x%x, fsynr=0x%x, cb=%d\n",
+ iova, fsr, fsynr, idx);
+ dev_dbg(smmu->dev, "soft iova-to-phys=%pa\n", &phys_soft);
+ ret = IRQ_HANDLED;
+ resume = ARM_SMMU_RESUME_TERMINATE;
+ } else {
+ phys_addr_t phys_atos = qcom_smmu_verify_fault(domain, iova, fsr);
+
+ if (__ratelimit(&_rs)) {
+ dev_err(smmu->dev,
+ "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
+ fsr, iova, fsynr, cbfrsynra, idx);
+ dev_err(smmu->dev,
+ "FSR = %08x [%s%s%s%s%s%s%s%s%s], SID=0x%x\n",
+ fsr,
+ (fsr & 0x02) ? "TF " : "",
+ (fsr & 0x04) ? "AFF " : "",
+ (fsr & 0x08) ? "PF " : "",
+ (fsr & 0x10) ? "EF " : "",
+ (fsr & 0x20) ? "TLBMCF " : "",
+ (fsr & 0x40) ? "TLBLKF " : "",
+ (fsr & 0x80) ? "MHF " : "",
+ (fsr & 0x40000000) ? "SS " : "",
+ (fsr & 0x80000000) ? "MULTI " : "",
+ cbfrsynra);
+
+ dev_err(smmu->dev,
+ "soft iova-to-phys=%pa\n", &phys_soft);
+ if (!phys_soft)
+ dev_err(smmu->dev,
+ "SOFTWARE TABLE WALK FAILED! Looks like %s accessed an unmapped address!\n",
+ dev_name(smmu->dev));
+ if (phys_atos)
+ dev_err(smmu->dev, "hard iova-to-phys (ATOS)=%pa\n",
+ &phys_atos);
+ else
+ dev_err(smmu->dev, "hard iova-to-phys (ATOS) failed\n");
+ }
+ ret = IRQ_NONE;
+ resume = ARM_SMMU_RESUME_TERMINATE;
+ }
+
+ /*
+ * If the client returns -EBUSY, do not clear FSR and do not RESUME
+ * if stalled. This is required to keep the IOMMU client stalled on
+ * the outstanding fault. This gives the client a chance to take any
+ * debug action and then terminate the stalled transaction.
+ * So, the sequence in case of stall on fault should be:
+ * 1) Do not clear FSR or write to RESUME here
+ * 2) Client takes any debug action
+ * 3) Client terminates the stalled transaction and resumes the IOMMU
+ * 4) Client clears FSR. The FSR should only be cleared after 3) and
+ * not before so that the fault remains outstanding. This ensures
+ * SCTLR.HUPCF has the desired effect if subsequent transactions also
+ * need to be terminated.
+ */
+ if (tmp != -EBUSY) {
+ /* Clear the faulting FSR */
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+
+ /* Retry or terminate any stalled transactions */
+ if (fsr & ARM_SMMU_FSR_SS)
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME, resume);
+ }
+
+ return ret;
+}
+
static int qsmmuv500_tbu_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 1622abace484..1af3d4a7fe1d 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -421,6 +421,10 @@ static const struct arm_smmu_impl sdm845_smmu_500_impl = {
.reset = qcom_sdm845_smmu500_reset,
.write_s2cr = qcom_smmu_write_s2cr,
.tlb_sync = qcom_smmu_tlb_sync,
+#ifdef CONFIG_ARM_SMMU_QCOM_TBU
+ .context_fault = qcom_smmu_context_fault,
+ .context_fault_needs_threaded_irq = true,
+#endif
};
static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 6/6] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
` (4 preceding siblings ...)
2023-11-18 4:27 ` [PATCH v2 5/6] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845 Georgi Djakov
@ 2023-11-18 4:27 ` Georgi Djakov
2023-11-18 11:21 ` [PATCH v2 0/6] Add support for Translation Buffer Units Bryan O'Donoghue
6 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-18 4:27 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, conor+dt, will, robin.murphy,
joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sdm845 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 82 ++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bf5e6eb9d313..5c7174415ae9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -5000,6 +5001,7 @@ pil-reloc@94c {
apps_smmu: iommu@15000000 {
compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x80000>;
+ ranges;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
@@ -5067,6 +5069,86 @@ apps_smmu: iommu@15000000 {
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ anoc_1_tbu: tbu@150c5000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150c5000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC>;
+ qcom,stream-id-range = <0x0 0x400>;
+ };
+
+ anoc_2_tbu: tbu@150c9000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150c9000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC>;
+ qcom,stream-id-range = <0x400 0x400>;
+ };
+
+ mnoc_hf_0_tbu: tbu@150cd000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150cd000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <0x800 0x400>;
+ };
+
+ mnoc_hf_1_tbu: tbu@150d1000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150d1000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <0xc00 0x400>;
+ };
+
+ mnoc_sf_0_tbu: tbu@150d5000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150d5000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+ &mmss_noc SLAVE_MNOC_SF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <0x1000 0x400>;
+ };
+
+ compute_dsp_tbu: tbu@150d9000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150d9000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <0x1400 0x400>;
+ };
+
+ adsp_tbu: tbu@150dd000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150dd000 0x0 0x1000>;
+ reg-names = "base";
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC>;
+ qcom,stream-id-range = <0x1800 0x400>;
+ };
+
+ anoc_1_pcie_tbu: tbu@150e1000 {
+ compatible = "qcom,qsmmuv500-tbu";
+ reg = <0x0 0x150e1000 0x0 0x1000>;
+ reg-names = "base";
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+ qcom,stream-id-range = <0x1c00 0x400>;
+ };
};
lpasscc: clock-controller@17014000 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v2 0/6] Add support for Translation Buffer Units
2023-11-18 4:27 [PATCH v2 0/6] Add support for Translation Buffer Units Georgi Djakov
` (5 preceding siblings ...)
2023-11-18 4:27 ` [PATCH v2 6/6] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs Georgi Djakov
@ 2023-11-18 11:21 ` Bryan O'Donoghue
2023-11-30 15:19 ` Georgi Djakov
6 siblings, 1 reply; 12+ messages in thread
From: Bryan O'Donoghue @ 2023-11-18 11:21 UTC (permalink / raw)
To: Georgi Djakov, robh+dt, krzysztof.kozlowski+dt, conor+dt, will,
robin.murphy, joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
On 18/11/2023 04:27, Georgi Djakov wrote:
> The TCUs (Translation Control Units) and TBUs (Translation Buffer
> Units) are key components of the MMU-500. Multiple TBUs are connected
> to a single TCU over an interconnect. Each TBU contains a TLB that
> caches page tables. The MMU-500 implements a TBU for each connected
> master, and the TBU is designed, so that it is local to the master.
>
> The Qualcomm SDM845 platform has an implementation of the SMMU-500,
> that has multiple TBUs. A DT schema is added to describe the resources
> for each TBU (register space, power-domains, interconnects and clocks).
>
> The TBU driver will manage the resources and allow the system to
> operate the TBUs during a context fault to obtain details by doing
> s1 inv, software + hardware page table walks etc. This is implemented
> with ATOS/eCATs as the ATS feature is not supported. Being able to
> query the TBUs is useful for debugging various hardware/software
> issues on these platforms.
>
> v2:
> - Improve DT binding description, add full example. (Konrad)
> - Drop Qcom specific stuff from the generic binding. (Rob)
> - Unconditionally try to populate subnodes. (Konrad)
> - Improve TBU driver commit text, remove memory barriers. (Bjorn)
> - Move TBU stuff into separate file. Make the driver builtin.
> - TODO: Evaluate whether to keep TBU support as a separate driver
> or just instantiate things from qcom_smmu_impl_init()
>
> v1: https://lore.kernel.org/r/20231019021923.13939-1-quic_c_gdjako@quicinc.com
What is your suggested way to test this series ?
---
bod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v2 0/6] Add support for Translation Buffer Units
2023-11-18 11:21 ` [PATCH v2 0/6] Add support for Translation Buffer Units Bryan O'Donoghue
@ 2023-11-30 15:19 ` Georgi Djakov
0 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2023-11-30 15:19 UTC (permalink / raw)
To: Bryan O'Donoghue, robh+dt, krzysztof.kozlowski+dt, conor+dt,
will, robin.murphy, joro
Cc: devicetree, andersson, konrad.dybcio, linux-arm-kernel, iommu,
linux-kernel, linux-arm-msm, quic_cgoldswo, quic_sukadev,
quic_pdaly, quic_sudaraja, djakov
On 11/18/2023 1:21 PM, Bryan O'Donoghue wrote:
> On 18/11/2023 04:27, Georgi Djakov wrote:
>> The TCUs (Translation Control Units) and TBUs (Translation Buffer
>> Units) are key components of the MMU-500. Multiple TBUs are connected
>> to a single TCU over an interconnect. Each TBU contains a TLB that
>> caches page tables. The MMU-500 implements a TBU for each connected
>> master, and the TBU is designed, so that it is local to the master.
>>
>> The Qualcomm SDM845 platform has an implementation of the SMMU-500,
>> that has multiple TBUs. A DT schema is added to describe the resources
>> for each TBU (register space, power-domains, interconnects and clocks).
>>
>> The TBU driver will manage the resources and allow the system to
>> operate the TBUs during a context fault to obtain details by doing
>> s1 inv, software + hardware page table walks etc. This is implemented
>> with ATOS/eCATs as the ATS feature is not supported. Being able to
>> query the TBUs is useful for debugging various hardware/software
>> issues on these platforms.
>>
>> v2:
>> - Improve DT binding description, add full example. (Konrad)
>> - Drop Qcom specific stuff from the generic binding. (Rob)
>> - Unconditionally try to populate subnodes. (Konrad)
>> - Improve TBU driver commit text, remove memory barriers. (Bjorn)
>> - Move TBU stuff into separate file. Make the driver builtin.
>> - TODO: Evaluate whether to keep TBU support as a separate driver
>> or just instantiate things from qcom_smmu_impl_init()
>>
>> v1: https://lore.kernel.org/r/20231019021923.13939-1-quic_c_gdjako@quicinc.com
>
> What is your suggested way to test this series ?
Hi Bryan,
Just break some driver to initiate a memory transaction with no valid context. I used venus for that. Or the simplest would be to just specify an invalid stream ID in DT for some device.
Thanks,
Georgi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread