From: Alex Bee <knaerzche@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Alex Bee <knaerzche@gmail.com>
Subject: [PATCH v2 2/2] ARM: dts: rockchip: Enable gmac for XPI-3128
Date: Sat, 2 Dec 2023 13:41:59 +0100 [thread overview]
Message-ID: <20231202124158.65615-4-knaerzche@gmail.com> (raw)
In-Reply-To: <20231202124158.65615-2-knaerzche@gmail.com>
Add the required properties and enable the gmac node for XPI-3128 board.
The minimum reset timing requirements for the phy have been taken from
DP83848J's datasheet [0]
[0] https://www.ti.com/lit/ds/symlink/dp83848j.pdf
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
.../arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 61b9f069c8a2..e979425f11a0 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -11,6 +11,7 @@ / {
compatible = "geniatech,xpi-3128", "rockchip,rk3128";
aliases {
+ ethernet0 = &gmac;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
@@ -255,6 +256,18 @@ &emmc {
status = "okay";
};
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates= <50000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ status = "okay";
+};
+
&gpio0 {
gpio-line-names = /* GPIO0 A0-A7 */
"", "", "HEADER_5", "HEADER_3",
@@ -315,6 +328,21 @@ &gpio3 {
"", "", "", "";
};
+&mdio {
+ phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ max-speed = <100>;
+ /* T2.2.4 min. 1 us */
+ reset-assert-us = <10>;
+ /* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+ reset-deassert-us = <20>;
+ reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp83848c_rst>;
+ };
+};
+
&pinctrl {
dp83848c {
dp83848c_rst: dp83848c-rst {
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-02 12:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-02 12:41 [PATCH v2 0/2] Add GMAC for RK3128 Alex Bee
2023-12-02 12:41 ` [PATCH v2 1/2] ARM: dts: rockchip: Add gmac node " Alex Bee
2023-12-02 12:41 ` Alex Bee [this message]
2023-12-02 16:36 ` [PATCH v2 0/2] Add GMAC " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231202124158.65615-4-knaerzche@gmail.com \
--to=knaerzche@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).