From: Alain Volmat <alain.volmat@foss.st.com>
To: Andi Shyti <andi.shyti@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>,
Alain Volmat <alain.volmat@foss.st.com>
Cc: Conor Dooley <conor@kernel.org>, Rob Herring <robh@kernel.org>,
<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/7] i2c: stm32f7: simplify status messages in case of errors
Date: Fri, 8 Dec 2023 17:47:11 +0100 [thread overview]
Message-ID: <20231208164719.3584028-3-alain.volmat@foss.st.com> (raw)
In-Reply-To: <20231208164719.3584028-1-alain.volmat@foss.st.com>
Avoid usage of __func__ when reporting an error message
since dev_err/dev_dbg are already providing enough details
to identify the source of the message.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
drivers/i2c/busses/i2c-stm32f7.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 34dcc370e615..2a011deec3c5 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1602,6 +1602,7 @@ static irqreturn_t stm32f7_i2c_isr_error_thread(int irq, void *data)
{
struct stm32f7_i2c_dev *i2c_dev = data;
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ u16 addr = f7_msg->addr;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
struct stm32_i2c_dma *dma = i2c_dev->dma;
@@ -1611,8 +1612,7 @@ static irqreturn_t stm32f7_i2c_isr_error_thread(int irq, void *data)
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
- dev_err(dev, "<%s>: Bus error accessing addr 0x%x\n",
- __func__, f7_msg->addr);
+ dev_err(dev, "Bus error accessing addr 0x%x\n", addr);
writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
stm32f7_i2c_release_bus(&i2c_dev->adap);
f7_msg->result = -EIO;
@@ -1620,21 +1620,19 @@ static irqreturn_t stm32f7_i2c_isr_error_thread(int irq, void *data)
/* Arbitration loss */
if (status & STM32F7_I2C_ISR_ARLO) {
- dev_dbg(dev, "<%s>: Arbitration loss accessing addr 0x%x\n",
- __func__, f7_msg->addr);
+ dev_dbg(dev, "Arbitration loss accessing addr 0x%x\n", addr);
writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR);
f7_msg->result = -EAGAIN;
}
if (status & STM32F7_I2C_ISR_PECERR) {
- dev_err(dev, "<%s>: PEC error in reception accessing addr 0x%x\n",
- __func__, f7_msg->addr);
+ dev_err(dev, "PEC error in reception accessing addr 0x%x\n", addr);
writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
f7_msg->result = -EINVAL;
}
if (status & STM32F7_I2C_ISR_ALERT) {
- dev_dbg(dev, "<%s>: SMBus alert received\n", __func__);
+ dev_dbg(dev, "SMBus alert received\n");
writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR);
i2c_handle_smbus_alert(i2c_dev->alert->ara);
return IRQ_HANDLED;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-08 16:48 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-08 16:47 [PATCH v2 0/7] i2c: stm32f7: enhancements and support for stm32mp25 Alain Volmat
2023-12-08 16:47 ` [PATCH v2 1/7] i2c: stm32f7: perform most of irq job in threaded handler Alain Volmat
2023-12-08 20:04 ` Andi Shyti
2023-12-08 16:47 ` Alain Volmat [this message]
2023-12-08 20:06 ` [PATCH v2 2/7] i2c: stm32f7: simplify status messages in case of errors Andi Shyti
2023-12-08 16:47 ` [PATCH v2 3/7] dt-bindings: i2c: document st,stm32mp25-i2c compatible Alain Volmat
2023-12-12 17:07 ` Conor Dooley
2023-12-08 16:47 ` [PATCH v2 4/7] i2c: stm32f7: add support for stm32mp25 soc Alain Volmat
2023-12-09 0:07 ` Andi Shyti
2023-12-15 12:12 ` Alain Volmat
2023-12-08 16:47 ` [PATCH v2 5/7] arm64: dts: st: add all 8 i2c nodes on stm32mp251 Alain Volmat
2023-12-08 16:47 ` [PATCH v2 6/7] arm64: dts: st: add i2c2/i2c8 pins for stm32mp25 Alain Volmat
2023-12-08 16:47 ` [PATCH v2 7/7] arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1 Alain Volmat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231208164719.3584028-3-alain.volmat@foss.st.com \
--to=alain.volmat@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=pierre-yves.mordret@foss.st.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox