From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: bhelgaas@google.com, conor+dt@kernel.org,
devicetree@vger.kernel.org, festevam@gmail.com,
helgaas@kernel.org, hongxing.zhu@nxp.com, imx@lists.linux.dev,
kernel@pengutronix.de, krzysztof.kozlowski+dt@linaro.org,
kw@linux.com, l.stach@pengutronix.de,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
lpieralisi@kernel.org, robh@kernel.org, s.hauer@pengutronix.de,
shawnguo@kernel.org
Subject: Re: [PATCH v3 01/13] PCI: imx6: Simplify clock handling by using HAS_CLK_* bitmask
Date: Tue, 12 Dec 2023 22:19:13 +0530 [thread overview]
Message-ID: <20231212164913.GA21240@thinkpad> (raw)
In-Reply-To: <20231211215842.134823-2-Frank.Li@nxp.com>
On Mon, Dec 11, 2023 at 04:58:30PM -0500, Frank Li wrote:
> Refactors the clock handling logic in the imx6 PCI driver by adding
> HAS_CLK_* bitmask define for drvdata::flags . Simplifies the code and makes
> it more maintainable, as future additions of SOC support will only require
> straightforward changes. The drvdata::flags and a bitmask ensures a cleaner
> and more scalable switch-case structure for handling clocks.
>
Is there any necessity to validate each clock in the driver? I mean, can't you
just rely on devicetree to provide enough clocks for the functioning of the PCIe
controller?
If you can rely on devicetree (everyone should in an ideal world), then you can
just use devm_clk_bulk_get_all() to get all available clocks for the SoC and
just enable/disable whatever is available.
This will greatly simplify the code.
Only downside of this approach is, if the devicetree is not supplying enough
clocks, then it will be difficult to find why PCIe is not working. But this also
means that the devicetree is screwed.
- Mani
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>
> Notes:
> Change from v1 to v3
> - none
>
> drivers/pci/controller/dwc/pci-imx6.c | 84 +++++++++++++--------------
> 1 file changed, 42 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 74703362aeec7..8a9b527934f80 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -60,6 +60,10 @@ enum imx6_pcie_variants {
> #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
> #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
> #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
> +#define IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI BIT(3)
> +#define IMX6_PCIE_FLAG_HAS_CLK_AUX BIT(4)
> +
> +#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
>
> struct imx6_pcie_drvdata {
> enum imx6_pcie_variants variant;
> @@ -550,19 +554,23 @@ static int imx6_pcie_attach_pd(struct device *dev)
>
> static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> {
> - struct dw_pcie *pci = imx6_pcie->pci;
> - struct device *dev = pci->dev;
> unsigned int offset;
> int ret = 0;
>
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX6SX:
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI)) {
> ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
> - if (ret) {
> - dev_err(dev, "unable to enable pcie_axi clock\n");
> - break;
> - }
> + if (ret)
> + return ret;
> + }
>
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_CLK_AUX)) {
> + ret = clk_prepare_enable(imx6_pcie->pcie_aux);
> + if (ret)
> + return ret;
> + }
> +
> + switch (imx6_pcie->drvdata->variant) {
> + case IMX6SX:
> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
> break;
> @@ -589,12 +597,6 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> case IMX8MQ_EP:
> case IMX8MP:
> case IMX8MP_EP:
> - ret = clk_prepare_enable(imx6_pcie->pcie_aux);
> - if (ret) {
> - dev_err(dev, "unable to enable pcie_aux clock\n");
> - break;
> - }
> -
> offset = imx6_pcie_grp_offset(imx6_pcie);
> /*
> * Set the over ride low and enabled
> @@ -614,10 +616,13 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
>
> static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
> {
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX6SX:
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI))
> clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> - break;
> +
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_CLK_AUX))
> + clk_disable_unprepare(imx6_pcie->pcie_aux);
> +
> + switch (imx6_pcie->drvdata->variant) {
> case IMX6QP:
> case IMX6Q:
> regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
> @@ -631,14 +636,6 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
> IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> break;
> - case IMX8MM:
> - case IMX8MM_EP:
> - case IMX8MQ:
> - case IMX8MQ_EP:
> - case IMX8MP:
> - case IMX8MP_EP:
> - clk_disable_unprepare(imx6_pcie->pcie_aux);
> - break;
> default:
> break;
> }
> @@ -1316,21 +1313,21 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie),
> "pcie clock source missing or invalid\n");
>
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX6SX:
> - imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
> - "pcie_inbound_axi");
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI)) {
> + imx6_pcie->pcie_inbound_axi = devm_clk_get(dev, "pcie_inbound_axi");
> if (IS_ERR(imx6_pcie->pcie_inbound_axi))
> - return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi),
> - "pcie_inbound_axi clock missing or invalid\n");
> - break;
> - case IMX8MQ:
> - case IMX8MQ_EP:
> + dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi),
> + "pcie_inbound_axi clock missing or invalid\n");
> + }
> +
> + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_CLK_AUX)) {
> imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> if (IS_ERR(imx6_pcie->pcie_aux))
> return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
> "pcie_aux clock source missing or invalid\n");
> - fallthrough;
> + }
> +
> + switch (imx6_pcie->drvdata->variant) {
> case IMX7D:
> if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> imx6_pcie->controller_id = 1;
> @@ -1353,10 +1350,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> case IMX8MM_EP:
> case IMX8MP:
> case IMX8MP_EP:
> - imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> - if (IS_ERR(imx6_pcie->pcie_aux))
> - return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
> - "pcie_aux clock source missing or invalid\n");
> imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
> "apps");
> if (IS_ERR(imx6_pcie->apps_reset))
> @@ -1482,7 +1475,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .variant = IMX6SX,
> .flags = IMX6_PCIE_FLAG_IMX6_PHY |
> IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
> - IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> + IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI,
> .gpr = "fsl,imx6q-iomuxc-gpr",
> },
> [IMX6QP] = {
> @@ -1500,30 +1494,36 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> },
> [IMX8MQ] = {
> .variant = IMX8MQ,
> + .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> },
> [IMX8MM] = {
> .variant = IMX8MM,
> - .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> + IMX6_PCIE_FLAG_HAS_CLK_AUX,
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> },
> [IMX8MP] = {
> .variant = IMX8MP,
> - .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> + IMX6_PCIE_FLAG_HAS_CLK_AUX,
> .gpr = "fsl,imx8mp-iomuxc-gpr",
> },
> [IMX8MQ_EP] = {
> .variant = IMX8MQ_EP,
> + .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
> .mode = DW_PCIE_EP_TYPE,
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> },
> [IMX8MM_EP] = {
> .variant = IMX8MM_EP,
> + .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
> .mode = DW_PCIE_EP_TYPE,
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> },
> [IMX8MP_EP] = {
> .variant = IMX8MP_EP,
> + .flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
> .mode = DW_PCIE_EP_TYPE,
> .gpr = "fsl,imx8mp-iomuxc-gpr",
> },
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-12 16:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-11 21:58 [PATCH v3 00/13] PCI: imx6: Clean up and add imx95 pci support Frank Li
2023-12-11 21:58 ` [PATCH v3 01/13] PCI: imx6: Simplify clock handling by using HAS_CLK_* bitmask Frank Li
2023-12-12 16:49 ` Manivannan Sadhasivam [this message]
2023-12-12 18:32 ` Frank Li
2023-12-12 22:54 ` Rob Herring
2023-12-12 23:18 ` Frank Li
2023-12-11 21:58 ` [PATCH v3 02/13] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY Frank Li
2023-12-11 21:58 ` [PATCH v3 03/13] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2023-12-11 21:58 ` [PATCH v3 04/13] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2023-12-11 21:58 ` [PATCH v3 05/13] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2023-12-11 21:58 ` [PATCH v3 06/13] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2023-12-11 21:58 ` [PATCH v3 07/13] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2023-12-11 21:58 ` [PATCH v3 08/13] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2023-12-12 22:44 ` Rob Herring
2023-12-12 23:28 ` Frank Li
2023-12-13 6:28 ` Krzysztof Kozlowski
2023-12-13 14:36 ` Rob Herring
2023-12-13 15:39 ` Frank Li
2023-12-13 16:46 ` Frank Li
2023-12-11 21:58 ` [PATCH v3 09/13] PCI: imx6: Add iMX95 PCIe support Frank Li
2023-12-11 21:58 ` [PATCH v3 10/13] PCI: imx6: Clean up get addr_space code Frank Li
2023-12-11 21:58 ` [PATCH v3 11/13] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2023-12-11 21:58 ` [PATCH v3 12/13] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2023-12-12 16:51 ` Conor Dooley
2023-12-13 6:29 ` Krzysztof Kozlowski
2023-12-11 21:58 ` [PATCH v3 13/13] PCI: imx6: Add iMX95 Endpoint (EP) function support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231212164913.GA21240@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).