* [PATCH] ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
@ 2023-12-06 12:45 Fabio Estevam
2023-12-13 9:14 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2023-12-06 12:45 UTC (permalink / raw)
To: shawnguo; +Cc: linux-arm-kernel, Fabio Estevam
From: Fabio Estevam <festevam@denx.de>
According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
there must be a "mux-" prefix in the audmux port nodes.
Add the "mux-" prefix to avoid the following dt-schema warning:
imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 8d428c844666..dc316358a7d4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -49,12 +49,12 @@ &audmux {
status = "okay";
/* SSI0 <=> PINS_4 (MC13783 Audio) */
- ssi0 {
+ mux-ssi0 {
fsl,audmux-port = <0>;
fsl,port-config = <0xcb205000>;
};
- pins4 {
+ mux-pins4 {
fsl,audmux-port = <2>;
fsl,port-config = <0x00001000>;
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
2023-12-06 12:45 [PATCH] ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix Fabio Estevam
@ 2023-12-13 9:14 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2023-12-13 9:14 UTC (permalink / raw)
To: Fabio Estevam; +Cc: linux-arm-kernel, Fabio Estevam
On Wed, Dec 06, 2023 at 09:45:29AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
>
> According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
> there must be a "mux-" prefix in the audmux port nodes.
>
> Add the "mux-" prefix to avoid the following dt-schema warning:
>
> imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-12-13 9:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-06 12:45 [PATCH] ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix Fabio Estevam
2023-12-13 9:14 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).