Re: [PATCH v2 2/3] usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer - Greg Kroah-Hartman

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Mathias Nyman <mathias.nyman@intel.com>,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Macpaul Lin <macpaul.lin@mediatek.com>,
	Eddie Hung <eddie.hung@mediatek.com>
Subject: Re: [PATCH v2 2/3] usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
Date: Fri, 15 Dec 2023 13:39:51 +0100	[thread overview]
Message-ID: <2023121539-dowry-ambiance-51e3@gregkh> (raw)
In-Reply-To: <20231215073431.8512-2-chunfeng.yun@mediatek.com>

On Fri, Dec 15, 2023 at 03:34:30PM +0800, Chunfeng Yun wrote:
> For Gen1 isoc-in transfer, host still send out unexpected ACK after device
> finish the burst with a short packet, this will cause an exception on the
> connected device, such as, a usb 4k camera.
> It can be fixed by setting rxfifo depth less than 3, prefer to use 2 here,
> the side-effect is that may cause performance drop about 10%, including
> bulk transfer.
> 
> Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195")
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2:
> use 'rx-fifo-depth' property;
> add header file 'linux/bitfield.h' to avoid building error on some ARCH;
> ---

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel