[PATCH v8 0/3] Add displays support for bsh-smm-s2/pro boards

[PATCH v8 0/3] Add displays support for bsh-smm-s2/pro boards

[Dario Binacchi]

The series adds drivers for the displays used by bsh-smm-s2/pro boards.
This required applying some patches to the samsung-dsim driver and the
drm_bridge.c module.

Changes in v8:
- Move the 'status' property to the end of the list of nodes:
  - pwm1
  - lcdif
  - mipi_dsi
- Add a newline between properties and child node (mipi_dsi_out).
- Sort the iomuxc node alphabetically
- Rename pwm1grp to blgrp

Changes in v7:
- Drop [3/4] dt-bindings: display: panel: Add synaptics r63353 panel controller
  because applied.

Changes in v6:
- Drop patches:
  - [06/10] drm/panel: Add Synaptics R63353 panel driver
  - [07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller
  - [08/10] drm/panel: Add Ilitek ILI9805 panel driver
  - [09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
  Because applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
  Drop patches:
  - [01/10] drm/bridge: Fix bridge disable logic
  - [02/10] drm/bridge: Fix a use case in the bridge disable logic
  Because they are wrong

Changes in v3:
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Dario Binacchi (2):
  drm: bridge: samsung-dsim: enter display mode in the enable() callback
  drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Michael Trimarchi (1):
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++++++++++++++
 drivers/gpu/drm/bridge/samsung-dsim.c         |  14 +-
 3 files changed, 133 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi

-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v8 3/3] arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

[Dario Binacchi]

From: Michael Trimarchi <michael@amarulasolutions.com>

Add the display and nodes required for its operation.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v8:
- Move the 'status' property to the end of the list of nodes:
  - pwm1
  - lcdif
  - mipi_dsi
- Add a newline between properties and child node (mipi_dsi_out).
- Sort the iomuxc node alphabetically
- Rename pwm1grp to blgrp

Changes in v7:
- Drop [3/4] dt-bindings: display: panel: Add synaptics r63353 panel controller
  because applied.

Changes in v6:
- Drop patches:
  - [06/10] drm/panel: Add Synaptics R63353 panel driver
  - [07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller
  - [08/10] drm/panel: Add Ilitek ILI9805 panel driver
  - [09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
  Because applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
  Drop patches:
  - [01/10] drm/bridge: Fix bridge disable logic
  - [02/10] drm/bridge: Fix a use case in the bridge disable logic
  Because they are wrong

Changes in v3:
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++++++++++++++
 2 files changed, 122 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d438f1..bbb07c650da9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..7675583a6b67
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v8 3/3] arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

[Shawn Guo]

On Thu, Dec 14, 2023 at 09:24:06AM +0100, Dario Binacchi wrote:
> From: Michael Trimarchi <michael@amarulasolutions.com>
> 
> Add the display and nodes required for its operation.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

Applied, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel