public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Alain Volmat <alain.volmat@foss.st.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Alain Volmat <alain.volmat@foss.st.com>,
	Erwan Leray <erwan.leray@foss.st.com>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: <linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 4/6] arm64: dts: st: add all 8 spi nodes on stm32mp251
Date: Mon, 18 Dec 2023 16:57:16 +0100	[thread overview]
Message-ID: <20231218155721.359198-5-alain.volmat@foss.st.com> (raw)
In-Reply-To: <20231218155721.359198-1-alain.volmat@foss.st.com>

Add the 8 nodes for all spi instances available on the stm32mp251.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 88 ++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index dfbdb3a773e4..feb30c6fb183 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -108,6 +108,28 @@ rifsc: rifsc-bus@42080000 {
 			#size-cells = <1>;
 			ranges;
 
+			spi2: spi@400b0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x400b0000 0x400>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI2>;
+				resets = <&rcc SPI2_R>;
+				status = "disabled";
+			};
+
+			spi3: spi@400c0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x400c0000 0x400>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI3>;
+				resets = <&rcc SPI3_R>;
+				status = "disabled";
+			};
+
 			usart2: serial@400e0000 {
 				compatible = "st,stm32h7-uart";
 				reg = <0x400e0000 0x400>;
@@ -116,6 +138,72 @@ usart2: serial@400e0000 {
 				status = "disabled";
 			};
 
+			spi1: spi@40230000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40230000 0x400>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI1>;
+				resets = <&rcc SPI1_R>;
+				status = "disabled";
+			};
+
+			spi4: spi@40240000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40240000 0x400>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI4>;
+				resets = <&rcc SPI4_R>;
+				status = "disabled";
+			};
+
+			spi5: spi@40280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40280000 0x400>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI5>;
+				resets = <&rcc SPI5_R>;
+				status = "disabled";
+			};
+
+			spi6: spi@40350000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40350000 0x400>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI6>;
+				resets = <&rcc SPI6_R>;
+				status = "disabled";
+			};
+
+			spi7: spi@40360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40360000 0x400>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI7>;
+				resets = <&rcc SPI7_R>;
+				status = "disabled";
+			};
+
+			spi8: spi@46020000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp25-spi";
+				reg = <0x46020000 0x400>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI8>;
+				resets = <&rcc SPI8_R>;
+				status = "disabled";
+			};
+
 			sdmmc1: mmc@48220000 {
 				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00353180>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-12-18 15:59 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-18 15:57 [PATCH 0/6] spi: stm32: add support for stm32mp25 Alain Volmat
2023-12-18 15:57 ` [PATCH 1/6] spi: stm32: use dma_get_slave_caps prior to configuring dma channel Alain Volmat
2023-12-18 15:57 ` [PATCH 2/6] dt-bindings: spi: stm32: add st,stm32mp25-spi compatible Alain Volmat
2023-12-18 16:58   ` Fabrice Gasnier
2023-12-19 16:39   ` Conor Dooley
2023-12-18 15:57 ` [PATCH 3/6] spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc Alain Volmat
2023-12-18 15:57 ` Alain Volmat [this message]
2023-12-18 15:57 ` [PATCH 5/6] arm64: dts: st: add spi3/spi8 pins for stm32mp25 Alain Volmat
2023-12-18 15:57 ` [PATCH 6/6] arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1 Alain Volmat
2023-12-22 13:30 ` (subset) [PATCH 0/6] spi: stm32: add support for stm32mp25 Mark Brown
2024-04-25  8:21 ` Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231218155721.359198-5-alain.volmat@foss.st.com \
    --to=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=erwan.leray@foss.st.com \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox