From: Alexey Charkov <alchark@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Heiko Stuebner" <heiko@sntech.de>,
"Sebastian Reichel" <sebastian.reichel@collabora.com>,
"Cristian Ciocaltea" <cristian.ciocaltea@collabora.com>,
"Christopher Obbard" <chris.obbard@collabora.com>,
"Tamás Szűcs" <szucst@iit.uni-miskolc.hu>,
"Shreeya Patel" <shreeya.patel@collabora.com>,
"Alexey Charkov" <alchark@gmail.com>,
"Kever Yang" <kever.yang@rock-chips.com>,
"Jagan Teki" <jagan@edgeble.ai>,
"Chris Morgan" <macromorgan@hotmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm64: dts: rockchip: enable built-in thermal monitoring on rk3588
Date: Tue, 9 Jan 2024 23:19:47 +0400 [thread overview]
Message-ID: <20240109192608.5981-1-alchark@gmail.com> (raw)
In-Reply-To: <20240106222357.23835-1-alchark@gmail.com>
Include thermal zones information in device tree for rk3588 variants
and enable the built-in thermal sensing ADC on RADXA Rock 5B
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
Changes in v2:
- Dropped redundant comments
- Included all CPU cores in cooling maps
- Split cooling maps into more granular ones utilizing TSADC
channels 1-3 which measure temperature by separate CPU clusters
instead of channel 0 which measures the center of the SoC die
---
.../boot/dts/rockchip/rk3588-rock-5b.dts | 4 +
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 151 ++++++++++++++++++
2 files changed, 155 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index a5a104131403..f9d540000de3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -772,3 +772,7 @@ &usb_host1_ehci {
&usb_host1_ohci {
status = "okay";
};
+
+&tsadc {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 8aa0499f9b03..8d54998d0ecc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/ata/ahci.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3588";
@@ -2112,6 +2113,156 @@ tsadc: tsadc@fec00000 {
status = "disabled";
};
+ thermal_zones: thermal-zones {
+ /* sensor near the center of the whole chip */
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <2100>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ soc_crit: soc-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* sensor between A76 cores 0 and 1 */
+ bigcore0_thermal: bigcore0-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ bigcore0_alert: bigcore0-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ bigcore0_crit: bigcore0-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&bigcore0_alert>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <1024>;
+ };
+ };
+ };
+
+ /* sensor between A76 cores 2 and 3 */
+ bigcore2_thermal: bigcore2-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ bigcore2_alert: bigcore2-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ bigcore2_crit: bigcore2-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map1 {
+ trip = <&bigcore2_alert>;
+ cooling-device =
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <1024>;
+ };
+ };
+ };
+
+ /* sensor between the four A55 cores */
+ little_core_thermal: littlecore-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 3>;
+
+ trips {
+ littlecore_alert: littlecore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ littlecore_crit: littlecore-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map2 {
+ trip = <&littlecore_alert>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <1024>;
+ };
+ };
+ };
+
+ /* sensor near the PD_CENTER power domain */
+ center_thermal: center-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 4>;
+
+ trips {
+ center_crit: center-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 5>;
+
+ trips {
+ gpu_crit: gpu-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ npu_thermal: npu-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 6>;
+
+ trips {
+ npu_crit: npu-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
saradc: adc@fec10000 {
compatible = "rockchip,rk3588-saradc";
reg = <0x0 0xfec10000 0x0 0x10000>;
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-01-09 19:27 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-06 22:23 [PATCH] arm64: dts: rockchip: enable built-in thermal monitoring on rk3588 Alexey Charkov
2024-01-06 22:54 ` Dragan Simic
2024-01-08 13:41 ` Alexey Charkov
2024-01-18 18:48 ` Dragan Simic
2024-01-21 18:56 ` Alexey Charkov
2024-01-22 4:55 ` Dragan Simic
2024-01-22 6:03 ` Alexey Charkov
2024-01-22 6:22 ` Dragan Simic
2024-01-22 7:36 ` Alexey Charkov
2024-01-22 7:57 ` Dragan Simic
2024-01-22 14:20 ` Alexey Charkov
2024-01-22 17:33 ` Dragan Simic
2024-01-09 19:19 ` Alexey Charkov [this message]
2024-01-18 19:20 ` [PATCH v2] " Dragan Simic
2024-01-19 13:15 ` Heiko Stübner
2024-01-19 16:21 ` Daniel Lezcano
2024-01-21 19:57 ` Alexey Charkov
2024-01-22 0:04 ` Daniel Lezcano
2024-01-22 5:57 ` Alexey Charkov
2024-01-23 19:47 ` Alexey Charkov
2024-01-24 0:14 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240109192608.5981-1-alchark@gmail.com \
--to=alchark@gmail.com \
--cc=chris.obbard@collabora.com \
--cc=conor+dt@kernel.org \
--cc=cristian.ciocaltea@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@edgeble.ai \
--cc=kever.yang@rock-chips.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=shreeya.patel@collabora.com \
--cc=szucst@iit.uni-miskolc.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).