Re: [PATCH 30 2/7] Add binding for Aspeed SOC

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1.1: Type: text/plain, Size: 4108 bytes --]

Hey,

On Tue, Jan 30, 2024 at 11:30:10PM +0000, Corona, Ernesto wrote:
> Aspeed AST2400, AST2500 and AST2600 JTAG controller driver.
> 
> Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
> Signed-off-by: Jiri Pirko <jiri@nvidia.com>
> Signed-off-by: Ernesto Corona <ernesto.corona@intel.com>
> Signed-off-by: Omar Castro <omar.eduardo.castro@linux.intel.com>
> Acked-by: Rob Herring <robh@kernel.org>

Where did this ack come from? The conversion to a yaml binding was in
v29 (according to your changelog) but I don't see the ack from Rob
there.
I think a conversion from (text?) to yaml would be sufficient of a
change to drop his tag.

> v28->v29
> - Change documentation to the new dt-bindings yaml format.

>  .../devicetree/bindings/jtag/aspeed-jtag.yaml | 85 +++++++++++++++++++
>  1 file changed, 85 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.yaml
> 
> diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.yaml b/Documentation/devicetree/bindings/jtag/aspeed-jtag.yaml
> new file mode 100644
> index 000000000000..1a412e83b81b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.yaml

Filename matching a compatible please.

> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/jtag/aspeed-jtag.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed JTAG driver for ast2400, ast2500 and ast2600 SoC
> +
> +description:
> +  Driver adds support of Aspeed 24/25/2600 series SOC JTAG controller.
> +  Driver implements the following jtag ops
> +    freq_get
> +    freq_set
> +    status_get
> +    status_set
> +    xfer
> +    mode_set
> +    bitbang
> +    enable
> +    disable

None of the driver stuff, nor where you tested this, is relevant to the
description in the binding nor the title of the binding. Just describe
the hardware.

> +
> +  It has been tested on Mellanox system with BMC equipped with
> +  Aspeed 2520 SoC for programming CPLD devices.
> +
> +  It has also been tested on Intel system using Aspeed 25xx SoC
> +  for JTAG communication.
> +
> +  Tested on Intel system using Aspeed 26xx SoC for JTAG communication.
> +
> +maintainers:
> +  - Oleksandr Shamray <oleksandrs@mellanox.com>
> +  - Jiri Pirko <jiri@nvidia.com>
> +  - Ernesto Corona<ernesto.corona@intel.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - aspeed,ast2400-jtag
> +              - aspeed,ast2500-jtag
> +              - aspeed,ast2600-jtag

You don't need the "oneOf" or "items" here, it's enough to do:
  compatible:
    enum:
      - allwinner,sun5i-a13-mbus
      - allwinner,sun8i-a33-mbus

> +
> +
> +  reg:
> +    items:
> +      - description: JTAG Master controller register range
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +      jtag: jtag@1e6e4000 {

The labels for both of these examples are also not needed
as they're not used anywhere.

Thanks,
Conor.

> +          compatible = "aspeed,ast2500-jtag";
> +          reg = <0x1e6e4000 0x1c>;
> +          clocks = <&syscon ASPEED_CLK_APB>;
> +          resets = <&syscon ASPEED_RESET_JTAG_MASTER>;
> +          interrupts = <43>;
> +      };
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +      jtag1: jtag@1e6e4100 {
> +          compatible = "aspeed,ast2600-jtag";
> +          reg = <0x1e6e4100 0x40>;
> +          clocks = <&syscon ASPEED_CLK_APB1>;
> +          resets = <&syscon ASPEED_RESET_JTAG_MASTER2>;
> +          interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +
> +...
> -- 
> 2.25.1

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel