[PATCH v4 4/7] thermal: sun8i: extend H6 calibration to support 4 sensors

Andre Przywara
2024-02-09T14:42:59Z

From: Maksim Kiselev <bigunclemax@gmail.com>

The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.

Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.

Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Co-developed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 42bee03c4e507..c919b0fd5e169 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -222,16 +222,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
struct device *dev = tmdev->dev;
int i, ft_temp;

- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+ if (!caldata[0])
return -EINVAL;

/*
* efuse layout:
*
- * 0 11 16 32
- * +-------+-------+-------+
- * |temp| |sensor0|sensor1|
- * +-------+-------+-------+
+ * 0 11 16 27 32 43 48 57
+ * +----------+-----------+-----------+-----------+
+ * | temp | |sensor0| |sensor1| |sensor2| |
+ * +----------+-----------+-----------+-----------+
+ * ^ ^ ^
+ * | | |
+ * | | sensor3[11:8]
+ * | sensor3[7:4]
+ * sensor3[3:0]
*
* The calibration data on the H6 is the ambient temperature and
* sensor values that are filled during the factory test stage.
@@ -244,9 +249,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;

for (i = 0; i < tmdev->chip->sensor_num; i++) {
- int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
- int cdata, offset;
- int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+ int sensor_reg, sensor_temp, cdata, offset;
+
+ if (i == 3)
+ sensor_reg = (caldata[1] >> 12)
+ | ((caldata[2] >> 12) << 4)
+ | ((caldata[3] >> 12) << 8);
+ else
+ sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+ sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);

/*
* Calibration data is CALIBRATE_DEFAULT - (calculated