From: Jisheng Zhang <jszhang@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/2] arm64: dts: allwinner: h618: Add Sipeed Longan SoM 3H and Pi 3H board
Date: Sun, 11 Feb 2024 16:17:37 +0800 [thread overview]
Message-ID: <20240211081739.395-1-jszhang@kernel.org> (raw)
Add Sipeed Longan SoM 3H and Longan Pi 3H board support.
The Sipeed Longan SoM 3H is a system on module based on the Allwinner
H618 SoC. The SoM features:
- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 2/4 GiB LPDDR4 DRAM SoMs
- AXP313a PMIC
- eMMC
The Sipeed Longan PI 3H is a development board based on the above SoM.
The board features:
- Longan SoM 3H
- Raspberry-Pi-1 compatible GPIO header
- 2 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- 1Gbps Ethernet port (via RTL8211 PHY)
- HDMI port
- WiFi/BT chip
Since v2:
- collect Reviewed-by tag
- add vin-supply property to reg_vcc3v3
- fix reg_vcc3v3 voltage value
- remove "interrupt-parent" and "interrupts" properties from axp313
node
Since v1:
- Use const rather than enum for "sipeed,longan-pi-3h" dt-binding
- remove dts-v1, model and compatible from SoM dtsi
- add interrupt related properties to axp313 dt node
- use "vcc-1v8-pll" and "vcc-3v3-io" as regulator name
- add dt node for board's discrete 5V->3.3V regulator and use it for
eth\tfcard 3.3v supply
- add usb2_vbus-supply property
Jisheng Zhang (2):
dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board
support
.../devicetree/bindings/arm/sunxi.yaml | 6 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../sun50i-h618-longan-module-3h.dtsi | 75 +++++++++
.../dts/allwinner/sun50i-h618-longanpi-3h.dts | 144 ++++++++++++++++++
4 files changed, 226 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-02-11 8:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 8:17 Jisheng Zhang [this message]
2024-02-11 8:17 ` [PATCH v3 1/2] dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H Jisheng Zhang
2024-02-11 16:29 ` Krzysztof Kozlowski
2024-02-12 10:34 ` Jisheng Zhang
2024-02-12 17:34 ` Conor Dooley
2024-02-11 8:17 ` [PATCH v3 2/2] arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support Jisheng Zhang
2024-02-11 23:39 ` Andre Przywara
2024-02-12 20:47 ` Jernej Škrabec
2024-02-12 21:12 ` [PATCH v3 0/2] arm64: dts: allwinner: h618: Add Sipeed Longan SoM 3H and Pi 3H board Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240211081739.395-1-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).