From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
Date: Sun, 11 Feb 2024 07:55:34 -0600 [thread overview]
Message-ID: <20240211135535.68516-1-aford173@gmail.com> (raw)
The imx8mp-beacon SOM has an integrated PHY connected to
the EQOS ethernet controller which can support up to five
queues. Configure these queues in the same manor as done
on the imx8mp-evk.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index 2ec282b91c42..8be251b69378 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -50,6 +50,8 @@ &eqos {
phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
snps,force_thresh_dma_mode;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
status = "okay";
mdio {
@@ -66,6 +68,71 @@ ethphy0: ethernet-phy@3 {
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
};
};
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ snps,map-to-dma-channel = <4>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+ snps,tx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
};
&flexspi {
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-02-11 13:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 13:55 Adam Ford [this message]
2024-02-25 3:21 ` [PATCH] arm64: dts: imx8mp-beacon: Configure multiple queues on eqos Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240211135535.68516-1-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox