linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Oliver Upton <oliver.upton@linux.dev>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>, Zenghui Yu <yuzenghui@huawei.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kvmarm@lists.linux.dev,
	Jing Zhang <jingzhangos@google.com>,
	Oliver Upton <oliver.upton@linux.dev>
Subject: [PATCH 2/3] irqchip/gic-v3-its: Spin off GICv4 init into a separate function
Date: Mon, 19 Feb 2024 18:58:07 +0000	[thread overview]
Message-ID: <20240219185809.286724-3-oliver.upton@linux.dev> (raw)
In-Reply-To: <20240219185809.286724-1-oliver.upton@linux.dev>

Burying the GICv4 redistributor initialization into the routine for LPIs
is a bit confusing, and can lead to sillies where unexpected codepaths
may not fully initialize the RD.

Hoist it out of its_cpu_init_lpis() into a dedicated function.

Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
---
 drivers/irqchip/irq-gic-v3-its.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 0022852ce494..63d1743f08cc 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -3173,8 +3173,25 @@ static void its_cpu_init_lpis(void)
 	writel_relaxed(val, rbase + GICR_CTLR);
 
 out:
-	if (gic_rdists->has_vlpis && !gic_rdists->has_rvpeid) {
+	/* Make sure the GIC has seen the above */
+	dsb(sy);
+	gic_data_rdist()->flags |= RD_LOCAL_LPI_ENABLED;
+	pr_info("GICv3: CPU%d: using %s LPI pending table @%pa\n",
+		smp_processor_id(),
+		gic_data_rdist()->flags & RD_LOCAL_PENDTABLE_PREALLOCATED ?
+		"reserved" : "allocated",
+		&paddr);
+}
+
+static void its_cpu_init_vlpis(void)
+{
+	/* No vLPIs? No problem. */
+	if (!gic_rdists->has_vlpis)
+		return;
+
+	if (!gic_rdists->has_rvpeid) {
 		void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+		u64 val;
 
 		/*
 		 * It's possible for CPU to receive VLPIs before it is
@@ -3193,7 +3210,8 @@ static void its_cpu_init_lpis(void)
 		 * ancient programming gets left in and has possibility of
 		 * corrupting memory.
 		 */
-		val = its_clear_vpend_valid(vlpi_base, 0, 0);
+		its_clear_vpend_valid(vlpi_base, 0, 0);
+		return;
 	}
 
 	if (allocate_vpe_l1_table()) {
@@ -3205,15 +3223,6 @@ static void its_cpu_init_lpis(void)
 		gic_rdists->has_rvpeid = false;
 		gic_rdists->has_vlpis = false;
 	}
-
-	/* Make sure the GIC has seen the above */
-	dsb(sy);
-	gic_data_rdist()->flags |= RD_LOCAL_LPI_ENABLED;
-	pr_info("GICv3: CPU%d: using %s LPI pending table @%pa\n",
-		smp_processor_id(),
-		gic_data_rdist()->flags & RD_LOCAL_PENDTABLE_PREALLOCATED ?
-		"reserved" : "allocated",
-		&paddr);
 }
 
 static void its_cpu_init_collection(struct its_node *its)
@@ -5265,6 +5274,7 @@ int its_cpu_init(void)
 			return ret;
 
 		its_cpu_init_lpis();
+		its_cpu_init_vlpis();
 		its_cpu_init_collections();
 	}
 
-- 
2.44.0.rc0.258.g7320e95886-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-02-19 18:58 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-19 18:58 [PATCH 0/3] irqchip/gic-v3-its: Fix GICv4.1 initialization after kexec Oliver Upton
2024-02-19 18:58 ` [PATCH 1/3] irqchip/gic-v3-its: Do not assume vPE tables are preallocated Oliver Upton
2024-02-19 18:58 ` Oliver Upton [this message]
2024-02-24 10:30   ` [PATCH 2/3] irqchip/gic-v3-its: Spin off GICv4 init into a separate function Marc Zyngier
2024-02-24 11:02     ` Oliver Upton
2024-02-24 11:10       ` Marc Zyngier
2024-02-19 18:58 ` [PATCH 3/3] irqchip/gic-v3-its: Print the vPE table installed in redistributor Oliver Upton
2024-02-24 10:41   ` Marc Zyngier
2024-02-24 11:11     ` Oliver Upton
2024-02-24 11:31       ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240219185809.286724-3-oliver.upton@linux.dev \
    --to=oliver.upton@linux.dev \
    --cc=jingzhangos@google.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).