Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 15 Mar 2024 13:47:40 -0400
Sean Anderson <sean.anderson@linux.dev> wrote:

> Hi Conall,
> 
> On 3/15/24 09:18, O'Griofa, Conall wrote:
> > [AMD Official Use Only - General]
> > 
> > Hi,
> > 
> > I think there was a fix for this issue applied to the version that was running on 5.15 that didn't seem to make it into the upstream driver.
> > Please see link for reference https://github.com/Xilinx/linux-xlnx/commit/608426961f16ab149b1b699f1c35f7ad244c0720
> > 
> > I think a similar fix to the above patch is may be beneficial?  
> 
> These patches look functionally identical to me.

Because there are no channels with scan index between
22 * 2 + 16 (that patch) and 22 * 3 (your patch) that is
the effect is indeed the same. But given the issues is the
64 limit on maximum scan index, 22 * 3 = 66 is an ugly value
to compare with.

I'm still very against the use of scan_index for anything other
than scan indices (which is why partly how this bug wasn't noticed
in the first palce). So the check should be scan_index != -1
and uses of those values elsewhere in the driver should be fixed
(which looks simple to do from a quick glance at the code).

Jonathan


> 
> --Sean
> 
> >> -----Original Message-----
> >> From: Sean Anderson <sean.anderson@linux.dev>
> >> Sent: Thursday, March 14, 2024 5:30 PM
> >> To: Jonathan Cameron <jic23@kernel.org>
> >> Cc: linux-iio@vger.kernel.org; O'Griofa, Conall <conall.ogriofa@amd.com>;
> >> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Lars-Peter
> >> Clausen <lars@metafoo.de>
> >> Subject: Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in
> >> scan_mask
> >>
> >> Caution: This message originated from an External Source. Use proper caution
> >> when opening attachments, clicking links, or responding.
> >>
> >>
> >> On 3/14/24 11:48, Jonathan Cameron wrote:  
> >> > On Mon, 11 Mar 2024 12:28:00 -0400
> >> > Sean Anderson <sean.anderson@linux.dev> wrote:
> >> >  
> >> >> ams_enable_channel_sequence constructs a "scan_mask" for all the PS
> >> >> and PL channels. This works out fine, since scan_index for these
> >> >> channels is less than 64. However, it also includes the
> >> >> ams_ctrl_channels, where scan_index is greater than 64, triggering
> >> >> undefined behavior. Since we don't need these channels anyway, just  
> >> exclude them.  
> >> >>
> >> >> Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
> >> >> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>  
> >> >
> >> > Hi Sean,
> >> >
> >> > I'd ideally like to understand why we have channels with such large
> >> > scan indexes.  Those values should only be used for buffered capture.
> >> > It feels like they are being abused here.  Can we set them to -1
> >> > instead and check based on that?
> >> > For a channel, a scan index of -1 means it can't be captured via the
> >> > buffered interfaces but only accessed via sysfs reads.
> >> > I think that's what we have here?  
> >>
> >> From what I can tell, none of the channels support buffered reads. And we can't
> >> naïvely convert the scan_index to -1, since that causes sysfs naming conflicts
> >> (not to mention the compatibility break).
> >>  
> >> >
> >> > I just feel like if we leave these as things stand, we will get bitten
> >> > by similar bugs in the future.  At least with -1 it should be obvious why!  
> >>
> >> There are just as likely to be bugs confusing the PL/PS subdevices...
> >>
> >> FWIW I had no trouble identifying the channels involved with this bug.
> >>
> >> --Sean
> >>  
> >> > Jonathan
> >> >
> >> >  
> >> >> ---
> >> >>
> >> >>  drivers/iio/adc/xilinx-ams.c | 8 ++++++--
> >> >>  1 file changed, 6 insertions(+), 2 deletions(-)
> >> >>
> >> >> diff --git a/drivers/iio/adc/xilinx-ams.c
> >> >> b/drivers/iio/adc/xilinx-ams.c index a55396c1f8b2..4de7ce598e4d
> >> >> 100644
> >> >> --- a/drivers/iio/adc/xilinx-ams.c
> >> >> +++ b/drivers/iio/adc/xilinx-ams.c
> >> >> @@ -414,8 +414,12 @@ static void ams_enable_channel_sequence(struct
> >> >> iio_dev *indio_dev)
> >> >>
> >> >>      /* Run calibration of PS & PL as part of the sequence */
> >> >>      scan_mask = BIT(0) | BIT(AMS_PS_SEQ_MAX);
> >> >> -    for (i = 0; i < indio_dev->num_channels; i++)
> >> >> -            scan_mask |= BIT_ULL(indio_dev->channels[i].scan_index);
> >> >> +    for (i = 0; i < indio_dev->num_channels; i++) {
> >> >> +            const struct iio_chan_spec *chan =
> >> >> + &indio_dev->channels[i];
> >> >> +
> >> >> +            if (chan->scan_index < AMS_CTRL_SEQ_BASE)
> >> >> +                    scan_mask |= BIT_ULL(chan->scan_index);
> >> >> +    }
> >> >>
> >> >>      if (ams->ps_base) {
> >> >>              /* put sysmon in a soft reset to change the sequence */  
> >> >  
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel