From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Oliver Upton <oliver.upton@linux.dev>,
Zenghui Yu <yuzenghui@huawei.com>
Subject: [PATCH] arm64: Fix early handling of FEAT_E2H0 not being implemented
Date: Thu, 21 Mar 2024 11:54:14 +0000 [thread overview]
Message-ID: <20240321115414.3169115-1-maz@kernel.org> (raw)
Commit 3944382fa6f2 introduced checks for the FEAT_E2H0 not being
implemented. However, the check is absolutely wrong and makes a
point it testing a bit that is guaranteed to be zero.
On top of that, the detection happens way too late, after the
init_el2_state has done its job.
This went undetected because the HW this was tested on has E2H being
RAO/WI, and not RES1. However, the bug shows up when run as a nested
guest, where HCR_EL2.E2H is not necessarily set to 1. As a result,
booting the kernel in hVHE mode fails with timer accesses being
cought in a trap loop (which was fun to debug).
Fix the check for ID_AA64MMFR4_EL1.E2H0, and set the HCR_EL2.E2H bit
early so that it can be checked by the rest of the init sequence.
With this, hVHE works again in a NV environment that doesn't have
FEAT_E2H0.
Fixes: 3944382fa6f2 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/kernel/head.S | 29 ++++++++++++++++-------------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index ce08b744aaab..06234c3a15f3 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -291,6 +291,21 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
blr x2
0:
mov_q x0, HCR_HOST_NVHE_FLAGS
+
+ /*
+ * Compliant CPUs advertise their VHE-onlyness with
+ * ID_AA64MMFR4_EL1.E2H0 < 0. HCR_EL2.E2H can be
+ * RES1 in that case. Publish the E2H bit early so that
+ * it can be picked up by the init_el2_state macro.
+ *
+ * Fruity CPUs seem to have HCR_EL2.E2H set to RAO/WI, but
+ * don't advertise it (they predate this relaxation).
+ */
+ mrs_s x1, SYS_ID_AA64MMFR4_EL1
+ tbz x1, #(ID_AA64MMFR4_EL1_E2H0_SHIFT + ID_AA64MMFR4_EL1_E2H0_WIDTH - 1), 1f
+
+ orr x0, x0, #HCR_E2H
+1:
msr hcr_el2, x0
isb
@@ -303,22 +318,10 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
mov_q x1, INIT_SCTLR_EL1_MMU_OFF
- /*
- * Compliant CPUs advertise their VHE-onlyness with
- * ID_AA64MMFR4_EL1.E2H0 < 0. HCR_EL2.E2H can be
- * RES1 in that case.
- *
- * Fruity CPUs seem to have HCR_EL2.E2H set to RES1, but
- * don't advertise it (they predate this relaxation).
- */
- mrs_s x0, SYS_ID_AA64MMFR4_EL1
- ubfx x0, x0, #ID_AA64MMFR4_EL1_E2H0_SHIFT, #ID_AA64MMFR4_EL1_E2H0_WIDTH
- tbnz x0, #(ID_AA64MMFR4_EL1_E2H0_SHIFT + ID_AA64MMFR4_EL1_E2H0_WIDTH - 1), 1f
-
mrs x0, hcr_el2
and x0, x0, #HCR_E2H
cbz x0, 2f
-1:
+
/* Set a sane SCTLR_EL1, the VHE way */
pre_disable_mmu_workaround
msr_s SYS_SCTLR_EL12, x1
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-03-21 11:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 11:54 Marc Zyngier [this message]
2024-03-21 20:16 ` [PATCH] arm64: Fix early handling of FEAT_E2H0 not being implemented Catalin Marinas
2024-03-21 23:34 ` Oliver Upton
2024-04-01 8:46 ` Oliver Upton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240321115414.3169115-1-maz@kernel.org \
--to=maz@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=james.morse@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=oliver.upton@linux.dev \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).