Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Francesco Dolcini <francesco@dolcini.it>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/2] arm64: dts: ti: k3-am625-verdin: add PCIe reset gpio hog
Date: Wed, 27 Mar 2024 19:28:01 +0100	[thread overview]
Message-ID: <20240327182801.5997-3-francesco@dolcini.it> (raw)
In-Reply-To: <20240327182801.5997-1-francesco@dolcini.it>

From: Francesco Dolcini <francesco.dolcini@toradex.com>

Add a GPIO hog to release PCIe reset on the carrier board, this is
required to use M.2 or mPCIe cards.

Verdin AM62 does not have any PCIe interface, however the Verdin family
has PCIe and normally an M.2 or mPCIe slot is available in the carrier
board that can be used with cards that use only the USB interface toward
the host CPU, for example cellular network modem.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 8 +++++++-
 arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi    | 8 +++++++-
 arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi | 8 +++++++-
 arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi  | 8 +++++++-
 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi        | 9 +++++++++
 5 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index 6c4cec8728e4..e51fda1127ef 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -160,7 +160,8 @@ &mcu_gpio0 {
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -211,6 +212,11 @@ &verdin_gpio_keys {
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
index be62648e7818..74eec1a1abca 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -181,7 +181,8 @@ &mcu_gpio0 {
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -232,6 +233,11 @@ &verdin_gpio_keys {
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
index cd81a606c435..754216d8ac14 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
@@ -154,7 +154,8 @@ &mcu_gpio0 {
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -200,6 +201,11 @@ &verdin_gpio_keys {
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
index 997dfafd27eb..7372d392ec8a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -159,7 +159,8 @@ &mcu_gpio0 {
 	pinctrl-0 = <&pinctrl_gpio_1>,
 		    <&pinctrl_gpio_2>,
 		    <&pinctrl_gpio_3>,
-		    <&pinctrl_gpio_4>;
+		    <&pinctrl_gpio_4>,
+		    <&pinctrl_pcie_1_reset>;
 };
 
 /* Verdin I2C_3_HDMI */
@@ -205,6 +206,11 @@ &verdin_gpio_keys {
 	status = "okay";
 };
 
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
 /* Verdin UART_2 */
 &wkup_uart0 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index e8d8857ad51f..e6c10d23d038 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -1407,6 +1407,15 @@ &mcu_gpio0 {
 		"",
 		"",
 		"";
+
+	verdin_pcie_1_reset_hog: pcie-1-reset-hog {
+		gpio-hog;
+		/* Verdin PCIE_1_RESET# (SODIMM 244) */
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		line-name = "PCIE_1_RESET#";
+		output-low;
+		status = "disabled";
+	};
 };
 
 /* Verdin CAN_2 */
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-03-27 18:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-27 18:27 [PATCH v1 0/2] arm64: dts: ti: k3-am625-verdin: fix GPIOs pinctrl Francesco Dolcini
2024-03-27 18:28 ` [PATCH v1 1/2] arm64: dts: ti: verdin-am62: mallow: " Francesco Dolcini
2024-03-27 18:28 ` Francesco Dolcini [this message]
2024-04-09 19:39 ` [PATCH v1 0/2] arm64: dts: ti: k3-am625-verdin: " Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240327182801.5997-3-francesco@dolcini.it \
    --to=francesco@dolcini.it \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=francesco.dolcini@toradex.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox