[PATCH v2 2/2] thermal: amlogic: support A1 SoC family Thermal Sensor controller

From: Dmitry Rokosov <ddrokosov@salutedevices.com>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
	<mturquette@baylibre.com>, <khilman@baylibre.com>,
	<martin.blumenstingl@googlemail.com>, <glaroque@baylibre.com>,
	<rafael@kernel.org>, <daniel.lezcano@linaro.org>,
	<rui.zhang@intel.com>, <lukasz.luba@arm.com>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>
Cc: <kernel@salutedevices.com>, <rockosov@gmail.com>,
	<linux-amlogic@lists.infradead.org>, <linux-pm@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@salutedevices.com>
Subject: [PATCH v2 2/2] thermal: amlogic: support A1 SoC family Thermal Sensor controller
Date: Thu, 28 Mar 2024 22:13:11 +0300	[thread overview]
Message-ID: <20240328191322.17551-3-ddrokosov@salutedevices.com> (raw)
In-Reply-To: <20240328191322.17551-1-ddrokosov@salutedevices.com>

In comparison to other Amlogic chips, there is one key difference.
The offset for the sec_ao base, also known as u_efuse_off, is special,
while other aspects remain the same.

Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/thermal/amlogic_thermal.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 5877cde25b79..1d23afd32013 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -222,6 +222,12 @@ static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
 	.regmap_config = &amlogic_thermal_regmap_config_g12a,
 };
 
+static const struct amlogic_thermal_data amlogic_thermal_a1_cpu_param = {
+	.u_efuse_off = 0x114,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
 static const struct of_device_id of_amlogic_thermal_match[] = {
 	{
 		.compatible = "amlogic,g12a-ddr-thermal",
@@ -231,6 +237,10 @@ static const struct of_device_id of_amlogic_thermal_match[] = {
 		.compatible = "amlogic,g12a-cpu-thermal",
 		.data = &amlogic_thermal_g12a_cpu_param,
 	},
+	{
+		.compatible = "amlogic,a1-cpu-thermal",
+		.data = &amlogic_thermal_a1_cpu_param,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
