From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>,
Emil Renner Berthing <kernel@esmil.dk>,
Jacob Keller <jacob.e.keller@intel.com>,
Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
alexandre.torgue@foss.st.com, joabreu@synopsys.com,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
mcoquelin.stm32@gmail.com, samin.guo@starfivetech.com,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 6.8 07/68] net: stmmac: dwmac-starfive: Add support for JH7100 SoC
Date: Fri, 29 Mar 2024 08:25:03 -0400 [thread overview]
Message-ID: <20240329122652.3082296-7-sashal@kernel.org> (raw)
In-Reply-To: <20240329122652.3082296-1-sashal@kernel.org>
From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
[ Upstream commit 8d4597b871210429bda0f5c3a8816b7d9b6daf7e ]
Add a missing quirk to enable support for the StarFive JH7100 SoC.
Additionally, for greater flexibility in operation, allow using the
rgmii-rxid and rgmii-txid phy modes.
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 6 ++--
.../ethernet/stmicro/stmmac/dwmac-starfive.c | 32 ++++++++++++++++---
2 files changed, 31 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 85dcda51df052..4ec61f1ee71a2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -165,9 +165,9 @@ config DWMAC_STARFIVE
help
Support for ethernet controllers on StarFive RISC-V SoCs
- This selects the StarFive platform specific glue layer support for
- the stmmac device driver. This driver is used for StarFive JH7110
- ethernet controller.
+ This selects the StarFive platform specific glue layer support
+ for the stmmac device driver. This driver is used for the
+ StarFive JH7100 and JH7110 ethernet controllers.
config DWMAC_STI
tristate "STi GMAC support"
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
index 5d630affb4d15..4e1076faee0cd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
@@ -15,13 +15,20 @@
#include "stmmac_platform.h"
-#define STARFIVE_DWMAC_PHY_INFT_RGMII 0x1
-#define STARFIVE_DWMAC_PHY_INFT_RMII 0x4
-#define STARFIVE_DWMAC_PHY_INFT_FIELD 0x7U
+#define STARFIVE_DWMAC_PHY_INFT_RGMII 0x1
+#define STARFIVE_DWMAC_PHY_INFT_RMII 0x4
+#define STARFIVE_DWMAC_PHY_INFT_FIELD 0x7U
+
+#define JH7100_SYSMAIN_REGISTER49_DLYCHAIN 0xc8
+
+struct starfive_dwmac_data {
+ unsigned int gtxclk_dlychain;
+};
struct starfive_dwmac {
struct device *dev;
struct clk *clk_tx;
+ const struct starfive_dwmac_data *data;
};
static void starfive_dwmac_fix_mac_speed(void *priv, unsigned int speed, unsigned int mode)
@@ -67,6 +74,8 @@ static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
mode = STARFIVE_DWMAC_PHY_INFT_RGMII;
break;
@@ -89,6 +98,14 @@ static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
if (err)
return dev_err_probe(dwmac->dev, err, "error setting phy mode\n");
+ if (dwmac->data) {
+ err = regmap_write(regmap, JH7100_SYSMAIN_REGISTER49_DLYCHAIN,
+ dwmac->data->gtxclk_dlychain);
+ if (err)
+ return dev_err_probe(dwmac->dev, err,
+ "error selecting gtxclk delay chain\n");
+ }
+
return 0;
}
@@ -114,6 +131,8 @@ static int starfive_dwmac_probe(struct platform_device *pdev)
if (!dwmac)
return -ENOMEM;
+ dwmac->data = device_get_match_data(&pdev->dev);
+
dwmac->clk_tx = devm_clk_get_enabled(&pdev->dev, "tx");
if (IS_ERR(dwmac->clk_tx))
return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx),
@@ -144,8 +163,13 @@ static int starfive_dwmac_probe(struct platform_device *pdev)
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
+static const struct starfive_dwmac_data jh7100_data = {
+ .gtxclk_dlychain = 4,
+};
+
static const struct of_device_id starfive_dwmac_match[] = {
- { .compatible = "starfive,jh7110-dwmac" },
+ { .compatible = "starfive,jh7100-dwmac", .data = &jh7100_data },
+ { .compatible = "starfive,jh7110-dwmac" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, starfive_dwmac_match);
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next parent reply other threads:[~2024-03-29 12:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240329122652.3082296-1-sashal@kernel.org>
2024-03-29 12:25 ` Sasha Levin [this message]
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 15/68] arm64: dts: ti: Makefile: Add HDMI audio check for AM62A7-SK Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 23/68] cpuidle: Avoid potential overflow in integer multiplication Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 24/68] ARM: dts: rockchip: fix rk3288 hdmi ports node Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 25/68] ARM: dts: rockchip: fix rk322x " Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 26/68] arm64: dts: rockchip: fix rk3328 " Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 27/68] arm64: dts: rockchip: fix rk3399 " Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 30/68] pmdomain: ti: Add a null pointer check to the omap_prm_domain_init Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 31/68] pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 42/68] wifi: mt76: mt7915: add locking for accessing mapped registers Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 43/68] wifi: mt76: mt7996: disable AMSDU for non-data frames Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 44/68] wifi: mt76: mt7996: add locking for accessing mapped registers Sasha Levin
2024-03-29 12:25 ` [PATCH AUTOSEL 6.8 52/68] iommu/arm-smmu-v3: Hold arm_smmu_asid_lock during all of attach_dev Sasha Levin
2024-03-29 12:26 ` [PATCH AUTOSEL 6.8 67/68] Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240329122652.3082296-7-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=cristian.ciocaltea@collabora.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jacob.e.keller@intel.com \
--cc=joabreu@synopsys.com \
--cc=kernel@esmil.dk \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=samin.guo@starfivetech.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).