Re: [PATCH v2 1/3] dt-bindings: phy: phy-imx8-pcie: Add binding for i.MX8Q HSIO SerDes PHY

[Rob Herring <robh@kernel.org>]

On Tue, Apr 02, 2024 at 01:45:02PM +0800, Richard Zhu wrote:
> Add binding for controller ID and HSIO configuration setting of the
> i.MX8Q HSIO SerDes PHY.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
>  include/dt-bindings/phy/phy-imx8-pcie.h | 29 +++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/include/dt-bindings/phy/phy-imx8-pcie.h b/include/dt-bindings/phy/phy-imx8-pcie.h
> index 8bbe2d6538d8..3292c8be3354 100644
> --- a/include/dt-bindings/phy/phy-imx8-pcie.h
> +++ b/include/dt-bindings/phy/phy-imx8-pcie.h
> @@ -11,4 +11,33 @@
>  #define IMX8_PCIE_REFCLK_PAD_INPUT	1
>  #define IMX8_PCIE_REFCLK_PAD_OUTPUT	2
>  
> +/*
> + * i.MX8QM HSIO subsystem has three lane PHYs and three controllers:
> + * PCIEA(2 lanes capapble PCIe controller), PCIEB (only support one

capable

> + * lane) and SATA.
> + *
> + * In the different use cases. PCIEA can be binded to PHY lane0, lane1

s/binded/bound/

And throughout your patches.

> + * or Lane0 and lane1. PCIEB can be binded to lane1 or lane2 PHY. SATA
> + * can only be binded to last lane2 PHY.
> + *
> + * Define i.MX8Q HSIO controller ID here to specify the controller
> + * binded to the PHY.
> + * Meanwhile, i.MX8QXP HSIO subsystem has one lane PHY and PCIEB(only
> + * support one lane) controller.
> + */
> +#define IMX8Q_HSIO_PCIEA_ID	0
> +#define IMX8Q_HSIO_PCIEB_ID	1
> +#define IMX8Q_HSIO_SATA_ID	2

Please use the standard phy mode defines.

> +
> +/*
> + * On i.MX8QM, PCIEA is mandatory required if the HSIO is enabled.
> + * Define configurations beside PCIEA is enabled.
> + *
> + * On i.MX8QXP, HSIO module only has PCIEB and one lane PHY.
> + * The "IMX8Q_HSIO_CFG_PCIEB" can be used on i.MX8QXP platforms.
> + */
> +#define IMX8Q_HSIO_CFG_SATA		1
> +#define IMX8Q_HSIO_CFG_PCIEB		2
> +#define IMX8Q_HSIO_CFG_PCIEBSATA	3

This seems somewhat redundant both as the 3rd define is just an OR of 
the first 2 and all 3 overlap with the prior defines.

Seems like with standard PHY modes, the only additional information you 
might need is PCIEB vs. PCIEA.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel