linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 3/9] arm64: dts: hisilicon: hip06: move non-MMIO node out of soc
Date: Tue,  2 Apr 2024 21:31:42 +0200	[thread overview]
Message-ID: <20240402193148.62323-3-krzk@kernel.org> (raw)
In-Reply-To: <20240402193148.62323-1-krzk@kernel.org>

Non-MMIO devices, which are BTW not really part of the SoC, should not
be within simple-bus, as reported by dtc W=1 warning:

  hip06.dtsi:377.18-381.5: Warning (simple_bus_reg): /soc/refclk: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/hisilicon/hip06.dtsi | 84 ++++++++++++------------
 1 file changed, 42 insertions(+), 42 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index f46c33d10750..249ca3b4b703 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -258,6 +258,48 @@ its_dsa: msi-controller@c6000000 {
 		};
 	};
 
+	eth2: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth0: ethernet-4 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-5 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	refclk: refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		#clock-cells = <0>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -374,12 +416,6 @@ uart0: serial@2f8 {
 			};
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			#clock-cells = <0>;
-		};
-
 		usb_ohci: usb@a7030000 {
 			compatible = "generic-ohci";
 			reg = <0x0 0xa7030000 0x0 0x10000>;
@@ -570,42 +606,6 @@ port@5 {
 			};
 		};
 
-		eth0: ethernet-4 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet-5 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet-0 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet-1 {
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		sas0: sas@c3000000 {
 			compatible = "hisilicon,hip06-sas-v2";
 			reg = <0 0xc3000000 0 0x10000>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-04-02 19:32 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-02 19:31 [PATCH 1/9] arm64: dts: hisilicon: hip05: move non-MMIO node out of soc Krzysztof Kozlowski
2024-04-02 19:31 ` [PATCH 2/9] arm64: dts: hisilicon: hip05-d02: correct local-bus unit addresses Krzysztof Kozlowski
2024-04-02 19:31 ` Krzysztof Kozlowski [this message]
2024-04-02 19:31 ` [PATCH 4/9] arm64: dts: hisilicon: hip06: correct " Krzysztof Kozlowski
2024-04-02 19:31 ` [PATCH 5/9] arm64: dts: hisilicon: hip07: move non-MMIO node out of soc Krzysztof Kozlowski
2024-04-02 19:31 ` [PATCH 6/9] arm64: dts: hisilicon: hip07: correct unit addresses Krzysztof Kozlowski
2024-04-02 19:31 ` [PATCH 7/9] arm64: dts: hisilicon: hi6220-hikey: add missing port@0 reg Krzysztof Kozlowski
2024-04-02 19:31 ` [PATCH 8/9] arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators Krzysztof Kozlowski
2024-04-02 19:31 ` [PATCH 9/9] arm64: dts: hisilicon: hi6220: correct tsensor unit addresses Krzysztof Kozlowski
2024-04-24  6:54 ` [PATCH 1/9] arm64: dts: hisilicon: hip05: move non-MMIO node out of soc Krzysztof Kozlowski
2024-04-24  7:16   ` Wei Xu
2024-04-24  7:23     ` Krzysztof Kozlowski
2024-04-24  8:37       ` Krzysztof Kozlowski
2024-04-24  9:16         ` Wei Xu
2024-04-25 11:12         ` Wei Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240402193148.62323-3-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).