From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Lee Jones <lee@kernel.org>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: [PATCH] dt-bindings: mfd: syscon: Add missing simple syscon compatibles
Date: Tue, 2 Apr 2024 15:24:11 -0500 [thread overview]
Message-ID: <20240402202413.757283-1-robh@kernel.org> (raw)
Add various "simple" syscon compatibles which were undocumented or
still documented with old text bindings.
apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb,
fsl,ls1088a-reset, marvell,armada-3700-cpu-misc,
mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and
mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use
already. Remove the old text binding docs for the others.
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../arm/altera/socfpga-sdram-controller.txt | 12 -------
.../devicetree/bindings/arm/apm/scu.txt | 17 ----------
.../bindings/arm/marvell/armada-37xx.txt | 32 -------------------
.../bindings/mfd/brcm,iproc-cdru.txt | 16 ----------
.../bindings/mfd/brcm,iproc-mhb.txt | 18 -----------
.../devicetree/bindings/mfd/syscon.yaml | 15 +++++++++
6 files changed, 15 insertions(+), 95 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
delete mode 100644 Documentation/devicetree/bindings/arm/apm/scu.txt
delete mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
delete mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
delete mode 100644 Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
deleted file mode 100644
index 77ca635765e1..000000000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Altera SOCFPGA SDRAM Controller
-
-Required properties:
-- compatible : Should contain "altr,sdr-ctl" and "syscon".
- syscon is required by the Altera SOCFPGA SDRAM EDAC.
-- reg : Should contain 1 register range (address and length)
-
-Example:
- sdr: sdr@ffc25000 {
- compatible = "altr,sdr-ctl", "syscon";
- reg = <0xffc25000 0x1000>;
- };
diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt
deleted file mode 100644
index b45be06625fd..000000000000
--- a/Documentation/devicetree/bindings/arm/apm/scu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-GENE SoC series SCU Registers
-
-This system clock unit contain various register that control block resets,
-clock enable/disables, clock divisors and other deepsleep registers.
-
-Properties:
- - compatible : should contain two values. First value must be:
- - "apm,xgene-scu"
- second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
-Example :
- scu: system-clk-controller@17000000 {
- compatible = "apm,xgene-scu","syscon";
- reg = <0x0 0x17000000 0x0 0x400>;
- };
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
deleted file mode 100644
index 29fa93dad52b..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Power management
-----------------
-
-For power management (particularly DVFS and AVS), the North Bridge
-Power Management component is needed:
-
-Required properties:
-- compatible : should contain "marvell,armada-3700-nb-pm", "syscon";
-- reg : the register start and length for the North Bridge
- Power Management
-
-Example:
-
-nb_pm: syscon@14000 {
- compatible = "marvell,armada-3700-nb-pm", "syscon";
- reg = <0x14000 0x60>;
-}
-
-AVS
----
-
-For AVS an other component is needed:
-
-Required properties:
-- compatible : should contain "marvell,armada-3700-avs", "syscon";
-- reg : the register start and length for the AVS
-
-Example:
-avs: avs@11500 {
- compatible = "marvell,armada-3700-avs", "syscon";
- reg = <0x11500 0x40>;
-}
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
deleted file mode 100644
index 82f82e069563..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Broadcom iProc Chip Device Resource Unit (CDRU)
-
-Various Broadcom iProc SoCs have a set of registers that provide various
-chip specific device and resource configurations. This node allows access to
-these CDRU registers via syscon.
-
-Required properties:
-- compatible: should contain:
- "brcm,sr-cdru", "syscon" for Stingray
-- reg: base address and range of the CDRU registers
-
-Example:
- cdru: syscon@6641d000 {
- compatible = "brcm,sr-cdru", "syscon";
- reg = <0 0x6641d000 0 0x400>;
- };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
deleted file mode 100644
index 4421e9771b8a..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Broadcom iProc Multi Host Bridge (MHB)
-
-Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
-the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
-interface; 3) access to the Nitro (network processing) engine
-
-This node allows access to these MHB registers via syscon.
-
-Required properties:
-- compatible: should contain:
- "brcm,sr-mhb", "syscon" for Stingray
-- reg: base address and range of the MHB registers
-
-Example:
- mhb: syscon@60401000 {
- compatible = "brcm,sr-mhb", "syscon";
- reg = <0 0x60401000 0 0x38c>;
- };
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 9d55bee155ce..0327e779e327 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -38,11 +38,20 @@ properties:
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
+ - altr,sdr-ctl
- amd,pensando-elba-syscon
+ - apm,xgene-csw
+ - apm,xgene-efuse
+ - apm,xgene-mcb
+ - apm,xgene-rb
+ - apm,xgene-scu
- brcm,cru-clkset
+ - brcm,sr-cdru
+ - brcm,sr-mhb
- freecom,fsg-cs2-system-controller
- fsl,imx93-aonmix-ns-syscfg
- fsl,imx93-wakeupmix-syscfg
+ - fsl,ls1088a-reset
- hisilicon,dsa-subctrl
- hisilicon,hi6220-sramctrl
- hisilicon,pcie-sas-subctrl
@@ -51,9 +60,15 @@ properties:
- intel,lgm-syscon
- loongson,ls1b-syscon
- loongson,ls1c-syscon
+ - marvell,armada-3700-cpu-misc
+ - marvell,armada-3700-nb-pm
+ - marvell,armada-3700-avs
- marvell,armada-3700-usb2-host-misc
+ - mediatek,mt2712-pctl-a-syscfg
+ - mediatek,mt6397-pctl-pmic-syscfg
- mediatek,mt8135-pctl-a-syscfg
- mediatek,mt8135-pctl-b-syscfg
+ - mediatek,mt8173-pctl-a-syscfg
- mediatek,mt8365-syscfg
- microchip,lan966x-cpu-syscon
- microchip,sparx5-cpu-syscon
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-04-02 20:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-02 20:24 Rob Herring [this message]
2024-04-03 7:07 ` [PATCH] dt-bindings: mfd: syscon: Add missing simple syscon compatibles Krzysztof Kozlowski
2024-04-11 12:50 ` (subset) " Lee Jones
2024-04-11 14:28 ` Rob Herring
2024-04-11 15:07 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240402202413.757283-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).