Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Walle <mwalle@kernel.org>
To: Francesco Dolcini <francesco@dolcini.it>,
	Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Michael Walle <mwalle@kernel.org>
Subject: [PATCH v2] arm64: dts: ti: k3-{am62p,j722s}: Disable ethernet by default
Date: Wed,  3 Apr 2024 12:15:45 +0200	[thread overview]
Message-ID: <20240403101545.3932437-1-mwalle@kernel.org> (raw)

Device tree best practice is to disable any external interface in the
dtsi and just enable them if needed in the device tree. Thus, disable
the ethernet switch and its ports by default and just enable the ones
used by the EVMs in their device trees.

There is no functional change.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
v2:
 - move the status propert into k3-am62p5-main.dtsi, thus also update
   the k3-am62p5-sk.dts
 - put "status" last
---
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 3 +++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts   | 3 +++
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts   | 5 +----
 3 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 7337a9e13535..88bc64111234 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -673,6 +673,7 @@ cpsw3g: ethernet@8000000 {
 		assigned-clock-parents = <&k3_clks 13 11>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		dmas = <&main_pktdma 0xc600 15>,
 		       <&main_pktdma 0xc601 15>,
@@ -696,6 +697,7 @@ cpsw_port1: port@1 {
 				label = "port1";
 				phys = <&phy_gmii_sel 1>;
 				mac-address = [00 00 00 00 00 00];
+				status = "disabled";
 			};
 
 			cpsw_port2: port@2 {
@@ -704,6 +706,7 @@ cpsw_port2: port@2 {
 				label = "port2";
 				phys = <&phy_gmii_sel 2>;
 				mac-address = [00 00 00 00 00 00];
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 6694087b3665..6a9c99c5fb2a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -431,16 +431,19 @@ &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>,
 		    <&main_rgmii2_pins_default>;
+	status = "okay";
 };
 
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
+	status = "okay";
 };
 
 &cpsw_port2 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy1>;
+	status = "okay";
 };
 
 &cpsw3g_mdio {
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 6b148da2bcdc..8a38e5ae7d4f 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -226,10 +226,7 @@ cpsw3g_phy0: ethernet-phy@0 {
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
-};
-
-&cpsw_port2 {
-	status = "disabled";
+	status = "okay";
 };
 
 &main_gpio1 {
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2024-04-03 10:17 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-03 10:15 Michael Walle [this message]
2024-04-03 14:34 ` [PATCH v2] arm64: dts: ti: k3-{am62p,j722s}: Disable ethernet by default Andrew Davis
2024-04-09 19:42 ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240403101545.3932437-1-mwalle@kernel.org \
    --to=mwalle@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=francesco@dolcini.it \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox