linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers
@ 2024-04-03 18:15 Anand Moon
  2024-04-03 18:15 ` [PATCH v2 2/2] PM / devfreq: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() Anand Moon
  0 siblings, 1 reply; 2+ messages in thread
From: Anand Moon @ 2024-04-03 18:15 UTC (permalink / raw)
  To: Chanwoo Choi, MyungJoo Ham, Kyungmin Park, Krzysztof Kozlowski,
	Alim Akhtar
  Cc: Anand Moon, linux-pm, linux-samsung-soc, linux-arm-kernel,
	linux-kernel

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

While at it, use dev_err_probe consistently, and use its return value
to return the error code.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v2: no changes
---
 drivers/devfreq/exynos-bus.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 245898f1a88e..153340b6685f 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -160,7 +160,6 @@ static void exynos_bus_exit(struct device *dev)
 	platform_device_unregister(bus->icc_pdev);
 
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 	dev_pm_opp_put_regulators(bus->opp_token);
 }
 
@@ -171,7 +170,6 @@ static void exynos_bus_passive_exit(struct device *dev)
 	platform_device_unregister(bus->icc_pdev);
 
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 }
 
 static int exynos_bus_parent_parse_of(struct device_node *np,
@@ -247,23 +245,15 @@ static int exynos_bus_parse_of(struct device_node *np,
 	int ret;
 
 	/* Get the clock to provide each bus with source clock */
-	bus->clk = devm_clk_get(dev, "bus");
-	if (IS_ERR(bus->clk)) {
-		dev_err(dev, "failed to get bus clock\n");
-		return PTR_ERR(bus->clk);
-	}
-
-	ret = clk_prepare_enable(bus->clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to get enable clock\n");
-		return ret;
-	}
+	bus->clk = devm_clk_get_enabled(dev, "bus");
+	if (IS_ERR(bus->clk))
+		return dev_err_probe(dev, PTR_ERR(bus->clk), "failed to get bus clock\n");
 
 	/* Get the freq and voltage from OPP table to scale the bus freq */
 	ret = dev_pm_opp_of_add_table(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to get OPP table\n");
-		goto err_clk;
+		return ret;
 	}
 
 	rate = clk_get_rate(bus->clk);
@@ -281,8 +271,6 @@ static int exynos_bus_parse_of(struct device_node *np,
 
 err_opp:
 	dev_pm_opp_of_remove_table(dev);
-err_clk:
-	clk_disable_unprepare(bus->clk);
 
 	return ret;
 }
@@ -453,7 +441,6 @@ static int exynos_bus_probe(struct platform_device *pdev)
 
 err:
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 err_reg:
 	dev_pm_opp_put_regulators(bus->opp_token);
 
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-04-03 18:26 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-04-03 18:15 [PATCH v2 1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers Anand Moon
2024-04-03 18:15 ` [PATCH v2 2/2] PM / devfreq: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() Anand Moon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).