linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/2] Add initial ARM MHUv3 mailbox support
@ 2024-04-03 17:13 Cristian Marussi
  2024-04-03 17:13 ` [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings Cristian Marussi
  2024-04-03 17:13 ` [PATCH v2 2/2] mailbox: arm_mhuv3: Add driver Cristian Marussi
  0 siblings, 2 replies; 5+ messages in thread
From: Cristian Marussi @ 2024-04-03 17:13 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel, devicetree
  Cc: sudeep.holla, cristian.marussi, jassisinghbrar, robh+dt,
	krzysztof.kozlowski+dt, conor+dt

Hi,

This series adds support for the new ARM Message Handling Unit v3 mailbox
controller [1].

The ARM MHUv3 can optionally support various extensions, enabling the
usage of different transport protocols.

Patch [2/2] adds a platform driver which, as of now, provides support only
for the Doorbell extension using the combined interrupt.

On the other side, bindings in [1/2] are introduced for all the extensions
described by the specification, as long as they are of interest to an
entity running from Normal world, like Linux: as such, Doorbell, FIFO and
FastChannel extensions are documented.

In these regards, note that the ARM MHUv3 controller can optionally
implement a considerable number of interrupts to express a great deal of
events and many of such interrupts are defined as being per-channel: with
the total maximum amount of possibly implemented channels across all
extensions being 1216 (1024+128+64), it would mean *a lot* of
interrupt-names to enumerate in the bindings.

For the sake of simplicity the binding as of now only introduces interrupt
names for a mere 8-channels in the range (0,7) for each per-channel
interrupt type: the idea is to leave open the possibility to add more to
this list of numbered items only when (and if) new real HW appears that
effectively needs more than 8 channels. (like AMBA, where the maximum
number of IRQ was progressively increased when needed, AFAIU).

Based on v6.9-rc1, tested on ARM TCS23 [2]
(TCS23 reference SW stack is still to be made fully publicly available)

Thanks,
Cristian

[1]: https://developer.arm.com/documentation/aes0072/aa/?lang=en
[2]: https://community.arm.com/arm-community-blogs/b/tools-software-ides-blog/posts/total-compute-solutions-platform-software-stack-and-fvp


---
v1 -> v2
 - clarified DT bindings extension descriptions around configurability
   and discoverability
 - removed unused labels from the DT example
 - using pattern properties to define DT interrupt-names
 - bumped DT interrupt maxItems to 74 (allowing uo to 8 channels per extension)
 - fixed checkpatch warnings about side-effects on write/read bitfield macros
 - fixed sparse errors as reported
   | Reported-by: kernel test robot <lkp@intel.com>
   | Closes: https://lore.kernel.org/oe-kbuild-all/202403290015.tCLXudqC-lkp@intel.com/

Cristian Marussi (2):
  dt-bindings: mailbox: arm,mhuv3: Add bindings
  mailbox: arm_mhuv3: Add driver

 .../bindings/mailbox/arm,mhuv3.yaml           |  217 ++++
 MAINTAINERS                                   |    9 +
 drivers/mailbox/Kconfig                       |   11 +
 drivers/mailbox/Makefile                      |    2 +
 drivers/mailbox/arm_mhuv3.c                   | 1063 +++++++++++++++++
 5 files changed, 1302 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
 create mode 100644 drivers/mailbox/arm_mhuv3.c

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings
  2024-04-03 17:13 [PATCH v2 0/2] Add initial ARM MHUv3 mailbox support Cristian Marussi
@ 2024-04-03 17:13 ` Cristian Marussi
  2024-04-03 18:24   ` Rob Herring
  2024-04-04  2:01   ` kernel test robot
  2024-04-03 17:13 ` [PATCH v2 2/2] mailbox: arm_mhuv3: Add driver Cristian Marussi
  1 sibling, 2 replies; 5+ messages in thread
From: Cristian Marussi @ 2024-04-03 17:13 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel, devicetree
  Cc: sudeep.holla, cristian.marussi, jassisinghbrar, robh+dt,
	krzysztof.kozlowski+dt, conor+dt

Add bindings for the ARM MHUv3 Mailbox controller.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
v1 -> v2
- clarified extension descriptions around configurability and discoverability
- removed unused labels from the example
- using pattern properties to define interrupt-names
- bumped interrupt maxItems to 74 (allowing uo to 8 channels per extension)
---
 .../bindings/mailbox/arm,mhuv3.yaml           | 217 ++++++++++++++++++
 1 file changed, 217 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml

diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
new file mode 100644
index 000000000000..d781045521da
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhuv3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHUv3 Mailbox Controller
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Cristian Marussi <cristian.marussi@arm.com>
+
+description: |
+  The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that
+  enables unidirectional communications with remote processors through various
+  possible transport protocols.
+  The controller can optionally support a varying number of extensions that, in
+  turn, enable different kinds of transport to be used for communication.
+  Number, type and characteristics of each supported extension can be discovered
+  dynamically at runtime.
+
+  Given the unidirectional nature of the controller, an MHUv3 mailbox controller
+  is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU
+  Receiver (MHUR) containing a MailBox (MBX) block, where
+
+   PBX is used to
+      - Configure the MHU
+      - Send Transfers to the Receiver
+      - Optionally receive acknowledgment of a Transfer from the Receiver
+
+   MBX is used to
+      - Configure the MHU
+      - Receive Transfers from the Sender
+      - Optionally acknowledge Transfers sent by the Sender
+
+  Both PBX and MBX need to be present and defined in the DT description if you
+  need to establish a bidirectional communication, since you will have to
+  acquire two distinct unidirectional channels, one for each block.
+
+  As a consequence both blocks needs to be represented separately and specified
+  as distinct DT nodes in order to properly describe their resources.
+
+  Note that, though, thanks to the runtime discoverability, there is no need to
+  identify the type of blocks with distinct compatibles.
+
+  Following are the MHUv3 possible extensions.
+
+  - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell
+    Channel (DBCH). DBCH enables a single bit Transfer to be sent from the
+    Sender to Receiver. The Transfer indicates that an event has occurred.
+    When DBE is implemented, the number of DBCHs that an implementation of the
+    MHU can support is between 1 and 128, numbered starting from 0 in ascending
+    order and discoverable at run-time.
+    Each DBCH contains 32 individual fields, referred to as flags, each of which
+    can be used independently. It is possible for the Sender to send multiple
+    Transfers at once using a single DBCH, so long as each Transfer uses
+    a different flag in the DBCH.
+    Optionally, data may be transmitted through an out-of-band shared memory
+    region, wherein the MHU Doorbell is used strictly as an interrupt generation
+    mechanism, but this is out of the scope of these bindings.
+
+  - FastChannel Extension (FCE): FCE defines a type of channel called a Fast
+    Channel (FCH). FCH is intended for lower overhead communication between
+    Sender and Receiver at the expense of determinism. An FCH allows the Sender
+    to update the channel value at any time, regardless of whether the previous
+    value has been seen by the Receiver. When the Receiver reads the channel's
+    content it gets the last value written to the channel.
+    FCH is considered lossy in nature, and means that the Sender has no way of
+    knowing if, or when, the Receiver will act on the Transfer.
+    FCHs are expected to behave as RAM which generates interrupts when writes
+    occur to the locations within the RAM.
+    When FCE is implemented, the number of FCHs that an implementation of the
+    MHU can support is between 1-1024, if the FastChannel word-size is 32-bits,
+    or between 1-512, when the FastChannel word-size is 64-bits.
+    FCHs are numbered from 0 in ascending order.
+    Note that the number of FCHs and the word-size are implementation defined,
+    not configurable but discoverable at run-time.
+    Optionally, data may be transmitted through an out-of-band shared memory
+    region, wherein the MHU FastChannel is used as an interrupt generation
+    mechanism which carries also a pointer to such out-of-band data, but this
+    is out of the scope of these bindings.
+
+  - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH).
+    FFCH allows a Sender to send
+       - Multiple Transfers to the Receiver without having to wait for the
+	 previous Transfer to be acknowledged by the Receiver, as long as the
+	 FIFO has room for the Transfer.
+       - Transfers which require the Receiver to provide acknowledgment.
+       - Transfers which have in-band payload.
+    In all cases, the data is guaranteed to be observed by the Receiver in the
+    same order which the Sender sent it.
+    When FE is implemented, the number of FFCHs that an implementation of the
+    MHU can support is between 1 and 64, numbered starting from 0 in ascending
+    order. The number of FFCHs, their depth (same for all implemented FFCHs) and
+    the access-granularity are implementation defined, not configurable but
+    discoverable at run-time.
+    Optionally, additional data may be transmitted through an out-of-band shared
+    memory region, wherein the MHU FIFO is used to transmit, in order, a small
+    part of the payload (like a header) and a reference to the shared memory
+    area holding the remaining, bigger, chunk of the payload, but this is out of
+    the scope of these bindings.
+
+properties:
+  compatible:
+    const: arm,mhuv3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 74
+
+  interrupt-names:
+    description: |
+      The MHUv3 controller generates a number of events some of which are used
+      to generate interrupts; as a consequence it can expose a varying number of
+      optional PBX/MBX interrupts, representing the events generated during the
+      operation of the various transport protocols associated with different
+      extensions. All interrupts of the MHU are level-sensitive.
+      Some of these optional interrupts are defined per-channel, where the
+      number of channels effectively available is implementation defined and
+      run-time discoverable.
+      In the following names are enumerated using patterns, with per-channel
+      interrupts implicitly capped at the maximum channels allowed by the
+      specification for each extension type.
+      For the sake of simplicity maxItems is anyway capped to a most plausible
+      number, assuming way less channels would be implemented than actually
+      possible.
+
+      The only mandatory interrupts on the MHU are:
+        - combined
+        - mbx-fch-xfer-<N> but only if mbx-fcgrp-xfer-<N> is not implemented.
+
+    minItems: 1
+    maxItems: 74
+    items:
+      oneOf:
+        - const: combined
+          description: PBX/MBX Combined interrupt
+        - const: combined-ffch
+          description: PBX/MBX FIFO Combined interrupt
+        - pattern: '^ffch-low-tide-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> Low Tide interrupt
+        - pattern: '^ffch-high-tide-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> High Tide interrupt
+        - pattern: '^ffch-flush-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> Flush interrupt
+        - pattern: '^mbx-dbch-xfer-[0-9]+$'
+          description: MBX Doorbell Channel <N> Transfer interrupt
+        - pattern: '^mbx-fch-xfer-[0-9]+$'
+          description: MBX FastChannel <N> Transfer interrupt
+        - pattern: '^mbx-fchgrp-xfer-[0-9]+$'
+          description: MBX FastChannel <N> Group Transfer interrupt
+        - pattern: '^mbx-ffch-xfer-[0-9]+$'
+          description: MBX FIFO Channel <N> Transfer interrupt
+        - pattern: '^pbx-dbch-xfer-ack-[0-9]+$'
+          description: PBX Doorbell Channel <N> Transfer Ack interrupt
+        - pattern: '^pbx-ffch-xfer-ack-[0-9]+$'
+          description: PBX FIFO Channel <N> Transfer Ack interrupt
+
+  '#mbox-cells':
+    description: |
+      The first argument in the consumers 'mboxes' property represents the
+      extension type, the second is for the channel number while the third
+      depends on extension type.
+
+      Extension type for DBE is 0 and the third parameter represents the
+      doorbell flag number to use.
+      Extension type for FCE is 1, third parameter unused.
+      Extension type for FE is 2, third parameter unused.
+
+      mboxes = <&mhu 0 0 5>; // DBE, Doorbell Channel Window 0, doorbell flag 5.
+      mboxes = <&mhu 0 1 7>; // DBE, Doorbell Channel Window 1, doorbell flag 7.
+      mboxes = <&mhu 1 0 0>; // FCE, FastChannel Window 0.
+      mboxes = <&mhu 1 3 0>; // FCE, FastChannel Window 3.
+      mboxes = <&mhu 2 1 0>; // FE, FIFO Channel Window 1.
+      mboxes = <&mhu 2 7 0>; // FE, FIFO Channel Window 7.
+    const: 3
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox@2aaa0000 {
+            compatible = "arm,mhuv3";
+            #mbox-cells = <3>;
+            reg = <0 0x2aaa0000 0 0x10000>;
+            clocks = <&clock 0>;
+            interrupt-names = "combined", "pbx-dbch-xfer-ack-1",
+                               "ffch-high-tide-0";
+            interrupts = <0 36 4>, <0 37 4>;
+        };
+
+        mailbox@2ab00000 {
+            compatible = "arm,mhuv3";
+            #mbox-cells = <3>;
+            reg = <0 0x2aab0000 0 0x10000>;
+            clocks = <&clock 0>;
+            interrupt-names = "combined", "mbx-dbch-xfer-1", "ffch-low-tide-0";
+            interrupts = <0 35 4>, <0 38 4>, <0 39 4>;
+        };
+    };
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH v2 2/2] mailbox: arm_mhuv3: Add driver
  2024-04-03 17:13 [PATCH v2 0/2] Add initial ARM MHUv3 mailbox support Cristian Marussi
  2024-04-03 17:13 ` [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings Cristian Marussi
@ 2024-04-03 17:13 ` Cristian Marussi
  1 sibling, 0 replies; 5+ messages in thread
From: Cristian Marussi @ 2024-04-03 17:13 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel, devicetree
  Cc: sudeep.holla, cristian.marussi, jassisinghbrar, robh+dt,
	krzysztof.kozlowski+dt, conor+dt

Add support for ARM MHUv3 mailbox controller.

Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX
combined interrupts.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
v1 -> v2
- fixed checkpatch warnings about side-effects
- fixed sparse errors as reported
  | Reported-by: kernel test robot <lkp@intel.com>
  | Closes: https://lore.kernel.org/oe-kbuild-all/202403290015.tCLXudqC-lkp@intel.com/
---
 MAINTAINERS                 |    9 +
 drivers/mailbox/Kconfig     |   11 +
 drivers/mailbox/Makefile    |    2 +
 drivers/mailbox/arm_mhuv3.c | 1063 +++++++++++++++++++++++++++++++++++
 4 files changed, 1085 insertions(+)
 create mode 100644 drivers/mailbox/arm_mhuv3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index aa3b947fb080..e957b9d9e32a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12998,6 +12998,15 @@ F:	Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
 F:	drivers/mailbox/arm_mhuv2.c
 F:	include/linux/mailbox/arm_mhuv2_message.h
 
+MAILBOX ARM MHUv3
+M:	Sudeep Holla <sudeep.holla@arm.com>
+M:	Cristian Marussi <cristian.marussi@arm.com>
+L:	linux-kernel@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
+F:	drivers/mailbox/arm_mhuv3.c
+
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
 M:	Alejandro Colomar <alx@kernel.org>
 L:	linux-man@vger.kernel.org
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 42940108a187..d20cdae65cfe 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -23,6 +23,17 @@ config ARM_MHU_V2
 	  Say Y here if you want to build the ARM MHUv2 controller driver,
 	  which provides unidirectional mailboxes between processing elements.
 
+config ARM_MHU_V3
+	tristate "ARM MHUv3 Mailbox"
+	depends on ARM64 || COMPILE_TEST
+	help
+	  Say Y here if you want to build the ARM MHUv3 controller driver,
+	  which provides unidirectional mailboxes between processing elements.
+
+	  ARM MHUv3 controllers can implement a varying number of extensions
+	  that provides different means of transports: supported extensions
+	  will be discovered and possibly managed at probe-time.
+
 config IMX_MBOX
 	tristate "i.MX Mailbox"
 	depends on ARCH_MXC || COMPILE_TEST
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 18793e6caa2f..5cf2f54debaf 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -9,6 +9,8 @@ obj-$(CONFIG_ARM_MHU)	+= arm_mhu.o arm_mhu_db.o
 
 obj-$(CONFIG_ARM_MHU_V2)	+= arm_mhuv2.o
 
+obj-$(CONFIG_ARM_MHU_V3)	+= arm_mhuv3.o
+
 obj-$(CONFIG_IMX_MBOX)	+= imx-mailbox.o
 
 obj-$(CONFIG_ARMADA_37XX_RWTM_MBOX)	+= armada-37xx-rwtm-mailbox.o
diff --git a/drivers/mailbox/arm_mhuv3.c b/drivers/mailbox/arm_mhuv3.c
new file mode 100644
index 000000000000..e4125568bec0
--- /dev/null
+++ b/drivers/mailbox/arm_mhuv3.c
@@ -0,0 +1,1063 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Message Handling Unit Version 3 (MHUv3) driver.
+ *
+ * Copyright (C) 2024 ARM Ltd.
+ *
+ * Based on ARM MHUv2 driver.
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/* ====== MHUv3 Registers ====== */
+
+/* Maximum number of Doorbell channel windows */
+#define MHUV3_DBCW_MAX			128
+/* Number of DBCH combined interrupt status registers */
+#define MHUV3_DBCH_CMB_INT_ST_REG_CNT	4
+#define MHUV3_INVALID_DOORBELL		0xFFFFFFFFUL
+
+/* Number of FFCH combined interrupt status registers */
+#define MHUV3_FFCH_CMB_INT_ST_REG_CNT	2
+
+#define MHUV3_STAT_BYTES		(sizeof(u32))
+#define MHUV3_STAT_BITS			(MHUV3_STAT_BYTES * __CHAR_BIT__)
+
+/* Not a typo ... */
+#define MHUV3_MAJOR_VERSION		2
+
+enum {
+	MHUV3_MBOX_CELL_TYPE,
+	MHUV3_MBOX_CELL_CHWN,
+	MHUV3_MBOX_CELL_PARAM,
+	MHUV3_MBOX_CELLS
+};
+
+/* CTRL_Page */
+
+struct blk_id {
+	u32 blk_id : 4;
+	u32 pad : 28;
+} __packed;
+
+struct feat_spt0 {
+	u32 dbe_spt : 4;
+	u32 fe_spt : 4;
+	u32 fce_spt : 4;
+	u32 tze_spt : 4;
+	u32 rme_spt : 4;
+	u32 rase_spt : 4;
+	u32 pad: 8;
+} __packed;
+
+struct feat_spt1 {
+	u32 auto_op_spt : 4;
+	u32 pad: 28;
+} __packed;
+
+struct dbch_cfg0 {
+	u32 num_dbch : 8;
+	u32 pad: 24;
+} __packed;
+
+struct ffch_cfg0 {
+	u32 num_ffch : 8;
+	u32 x8ba_spt : 1;
+	u32 x16ba_spt : 1;
+	u32 x32ba_spt : 1;
+	u32 x64ba_spt : 1;
+	u32 pad : 4;
+	u32 ffch_depth : 10;
+	u32 pad2 : 6;
+} __packed;
+
+struct fch_cfg0 {
+	u32 num_fch : 10;
+	/* MBX only registers */
+	u32 fcgi_spt : 1;
+	/* ------------------ */
+	u32 num_fcg : 5;
+	u32 num_fch_per_grp : 5;
+	u32 fch_ws : 8;
+	u32 pad : 3;
+} __packed;
+
+struct ctrl {
+	u32 op_req : 1;
+	u32 ch_op_mask : 1;
+	u32 pad : 30;
+} __packed;
+
+struct fch_ctrl {
+	u32 pad : 2;
+	u32 int_en : 1;
+	u32 pad2 : 29;
+} __packed;
+
+struct iidr {
+	u32 implementer : 12;
+	u32 revision : 4;
+	u32 variant : 4;
+	u32 product_id : 12;
+} __packed;
+
+struct aidr {
+	u32 arch_minor_rev : 4;
+	u32 arch_major_rev : 4;
+	u32 pad : 24;
+} __packed;
+
+struct ctrl_page {
+	struct blk_id blk_id;
+	u8 pad[0x10 - 0x4];
+	struct feat_spt0 feat_spt0;
+	struct feat_spt1 feat_spt1;
+	u8 pad1[0x20 - 0x18];
+	struct dbch_cfg0 dbch_cfg0;
+	u8 pad2[0x30 - 0x24];
+	struct ffch_cfg0 ffch_cfg0;
+	u8 pad3[0x40 - 0x34];
+	struct fch_cfg0 fch_cfg0;
+	u8 pad4[0x100 - 0x44];
+	struct ctrl ctrl;
+	/* MBX only registers */
+	u8 pad5[0x140 - 0x104];
+	struct fch_ctrl fch_ctrl;
+	u32 fcg_int_en;
+	u8 pad6[0x400 - 0x148];
+	/* ------------------ */
+	u32 dbch_int_st[MHUV3_DBCH_CMB_INT_ST_REG_CNT];
+	u32 ffch_int_st[MHUV3_FFCH_CMB_INT_ST_REG_CNT];
+	/* MBX only registers */
+	u8 pad7[0x470 - 0x418];
+	u32 fcg_int_st;
+	u8 pad8[0x480 - 0x474];
+	u32 fcg_grp_int_st[32];
+	u8 pad9[0xFC8 - 0x500];
+	/* ------------------ */
+	struct iidr iidr;
+	struct aidr aidr;
+	u32 imp_def_id[12];
+} __packed;
+
+/* DBCW_Page */
+
+struct xbcw_ctrl {
+	u32 comb_en : 1;
+	u32 pad : 31;
+} __packed;
+
+struct pdbcw_int {
+	u32 tfr_ack : 1;
+	u32 pad : 31;
+} __packed;
+
+struct pdbcw_page {
+	u32 st;
+	u8 pad[0xC - 0x4];
+	u32 set;
+	struct pdbcw_int int_st;
+	struct pdbcw_int int_clr;
+	struct pdbcw_int int_en;
+	struct xbcw_ctrl ctrl;
+} __packed;
+
+struct mdbcw_page {
+	u32 st;
+	u32 st_msk;
+	u32 clr;
+	u8 pad[0x10 - 0xC];
+	u32 msk_st;
+	u32 msk_set;
+	u32 msk_clr;
+	struct xbcw_ctrl ctrl;
+} __packed;
+
+struct dummy_page {
+	u8 pad[0x1000];
+} __packed;
+
+struct mhu3_pbx_frame_reg {
+	struct ctrl_page ctrl;
+	struct pdbcw_page dbcw[MHUV3_DBCW_MAX];
+	struct dummy_page ffcw;
+	struct dummy_page fcw;
+	u8 pad[0xF000 - 0x4000];
+	struct dummy_page impdef;
+} __packed;
+
+struct mhu3_mbx_frame_reg {
+	struct ctrl_page ctrl;
+	struct mdbcw_page dbcw[MHUV3_DBCW_MAX];
+	struct dummy_page ffcw;
+	struct dummy_page fcw;
+	u8 pad[0xF000 - 0x4000];
+	struct dummy_page impdef;
+} __packed;
+
+/* Macro for reading a bitfield within a physically mapped packed struct */
+#define readl_relaxed_bitfield(_regptr, _field)				\
+	({								\
+		u32 _rval;						\
+		typeof(_regptr) _rptr = _regptr;			\
+		_rval = readl_relaxed(_rptr);				\
+		((typeof(*_rptr) __force *)(&_rval))->_field;		\
+	})
+
+/* Macro for writing a bitfield within a physically mapped packed struct */
+#define writel_relaxed_bitfield(_value, _regptr, _field)		\
+	({								\
+		u32 _rval;						\
+		typeof(_regptr) _rptr = _regptr;			\
+		_rval = readl_relaxed(_rptr);				\
+		((typeof(*_rptr) __force *)(&_rval))->_field = _value;	\
+		writel_relaxed(_rval, _rptr);				\
+	})
+
+/* ====== MHUv3 data structures ====== */
+
+enum mhuv3_frame {
+	PBX_FRAME,
+	MBX_FRAME
+};
+
+static char *mhuv3_str[] = {
+	"PBX",
+	"MBX"
+};
+
+enum mhuv3_extension_type {
+	FIRST_EXT = 0,
+	DBE_EXT = FIRST_EXT,
+	FCE_EXT,
+	FE_EXT,
+	MAX_EXT
+};
+
+struct mhuv3;
+
+/**
+ * struct mhuv3_protocol_ops - MHUv3 operations
+ *
+ * @rx_startup: Receiver startup callback.
+ * @rx_shutdown: Receiver shutdown callback.
+ * @read_data: Read available Sender in-band LE data (if any).
+ * @rx_complete: Acknowledge data reception to the Sender. Any out-of-band data
+ *		 has to have been already retrieved before calling this.
+ * @tx_startup: Sender startup callback.
+ * @tx_shutdown: Sender shutdown callback.
+ * @last_tx_done: Report back to the Sender if the last transfer has completed.
+ * @send_data: Send data to the receiver.
+ *
+ * Each supported transport protocol provides its own implementation of
+ * these operations.
+ */
+struct mhuv3_protocol_ops {
+	int (*rx_startup)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	void (*rx_shutdown)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	void *(*read_data)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	void (*rx_complete)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	void (*tx_startup)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	void (*tx_shutdown)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	int (*last_tx_done)(struct mhuv3 *mhu, struct mbox_chan *chan);
+	int (*send_data)(struct mhuv3 *mhu, struct mbox_chan *chan, void *arg);
+};
+
+/**
+ * struct mhuv3_mbox_chan_priv - MHUv3 channel private information
+ *
+ * @ch_idx: Channel window index associated to this mailbox channel.
+ * @doorbell: Doorbell bit number within the @ch_idx window.
+ *	      Only relevant to Doorbell transport.
+ * @ops: Transport protocol specific operations for this channel.
+ *
+ * Transport specific data attached to mmailbox channel priv data.
+ */
+struct mhuv3_mbox_chan_priv {
+	u32 ch_idx;
+	u32 doorbell;
+	const struct mhuv3_protocol_ops *ops;
+};
+
+/**
+ * struct mhuv3_extension - MHUv3 extension descriptor
+ *
+ * @type: Type of extension
+ * @max_chans: Max number of channels found for this extension.
+ * @base_ch_idx: First channel number assigned to this extension, picked from
+ *		 the set of all mailbox channels descriptors created.
+ * @mbox_of_xlate: Extension specific helper to parse DT and lookup associated
+ *		   channel from the related 'mboxes' property.
+ * @combined_irq_setup: Extension specific helper to setup the combined irq.
+ * @channels_init: Extension specific helper to initialize channels.
+ * @chan_from_comb_irq_get: Extension specific helper to lookup which channel
+ *			    triggered the combined irq.
+ * @pending_db: Array of per-channel pending doorbells.
+ * @pending_lock: Protect access to pending_db.
+ */
+struct mhuv3_extension {
+	enum mhuv3_extension_type type;
+	unsigned int max_chans;
+	unsigned int base_ch_idx;
+	struct mbox_chan *(*mbox_of_xlate)(struct mhuv3 *mhu,
+					   unsigned int channel,
+					   unsigned int param);
+	void (*combined_irq_setup)(struct mhuv3 *mhu);
+	int (*channels_init)(struct mhuv3 *mhu);
+	struct mbox_chan *(*chan_from_comb_irq_get)(struct mhuv3 *mhu);
+	u32 pending_db[MHUV3_DBCW_MAX];
+	/* Protect access to pending_db */
+	spinlock_t pending_lock;
+};
+
+/**
+ * struct mhuv3 - MHUv3 mailbox controller data
+ *
+ * @frame:	Frame type: MBX_FRAME or PBX_FRAME.
+ * @auto_op_full: Flag to indicate if the MHU supports AutoOp full mode.
+ * @major: MHUv3 controller architectural major version.
+ * @minor: MHUv3 controller architectural minor version.
+ * @tot_chans: The total number of channnels discovered across all extensions.
+ * @cmb_irq: Combined IRQ number if any found defined.
+ * @ctrl: A reference to the MHUv3 control page for this block.
+ * @pbx: Base address of the PBX register mapping region.
+ * @mbx: Base address of the MBX register mapping region.
+ * @ext: Array holding descriptors for any found implemented extension.
+ * @mbox: Mailbox controller belonging to the MHU frame.
+ */
+struct mhuv3 {
+	enum mhuv3_frame frame;
+	bool auto_op_full;
+	unsigned int major;
+	unsigned int minor;
+	unsigned int tot_chans;
+	int cmb_irq;
+	struct ctrl_page __iomem *ctrl;
+	union {
+		struct mhu3_pbx_frame_reg __iomem *pbx;
+		struct mhu3_mbx_frame_reg __iomem *mbx;
+	};
+	struct mhuv3_extension *ext[MAX_EXT];
+	struct mbox_controller mbox;
+};
+
+#define mhu_from_mbox(_mbox) container_of(_mbox, struct mhuv3, mbox)
+
+typedef int (*mhuv3_extension_initializer)(struct mhuv3 *mhu);
+
+/* =================== Doorbell transport protocol operations =============== */
+
+static void mhuv3_doorbell_tx_startup(struct mhuv3 *mhu, struct mbox_chan *chan)
+{
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	/* Enable Transfer Acknowledgment events */
+	writel_relaxed_bitfield(0x1, &mhu->pbx->dbcw[priv->ch_idx].int_en, tfr_ack);
+}
+
+static void mhuv3_doorbell_tx_shutdown(struct mhuv3 *mhu, struct mbox_chan *chan)
+{
+	unsigned long flags;
+	struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	/* Disable Channel Transfer Ack events */
+	writel_relaxed_bitfield(0x0, &mhu->pbx->dbcw[priv->ch_idx].int_en, tfr_ack);
+
+	/* Clear Channel Transfer Ack and pending doorbells */
+	writel_relaxed_bitfield(0x1, &mhu->pbx->dbcw[priv->ch_idx].int_clr, tfr_ack);
+	spin_lock_irqsave(&e->pending_lock, flags);
+	e->pending_db[priv->ch_idx] = 0;
+	spin_unlock_irqrestore(&e->pending_lock, flags);
+}
+
+static int mhuv3_doorbell_rx_startup(struct mhuv3 *mhu, struct mbox_chan *chan)
+{
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	/* Unmask Channel Transfer events */
+	writel_relaxed(BIT(priv->doorbell), &mhu->mbx->dbcw[priv->ch_idx].msk_clr);
+
+	return 0;
+}
+
+static void mhuv3_doorbell_rx_shutdown(struct mhuv3 *mhu,
+				       struct mbox_chan *chan)
+{
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	/* Mask Channel Transfer events */
+	writel_relaxed(BIT(priv->doorbell), &mhu->mbx->dbcw[priv->ch_idx].msk_set);
+}
+
+static void mhuv3_doorbell_rx_complete(struct mhuv3 *mhu, struct mbox_chan *chan)
+{
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	/* Clearing the pending transfer generates the Channel Transfer Ack */
+	writel_relaxed(BIT(priv->doorbell), &mhu->mbx->dbcw[priv->ch_idx].clr);
+}
+
+static int mhuv3_doorbell_last_tx_done(struct mhuv3 *mhu,
+				       struct mbox_chan *chan)
+{
+	int done;
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	done = !(readl_relaxed(&mhu->pbx->dbcw[priv->ch_idx].st) &
+		 BIT(priv->doorbell));
+	if (done) {
+		unsigned long flags;
+		struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+
+		/* Take care to clear the pending doorbell also when polling */
+		spin_lock_irqsave(&e->pending_lock, flags);
+		e->pending_db[priv->ch_idx] &= ~BIT(priv->doorbell);
+		spin_unlock_irqrestore(&e->pending_lock, flags);
+	}
+
+	return done;
+}
+
+static int mhuv3_doorbell_send_data(struct mhuv3 *mhu, struct mbox_chan *chan,
+				    void *arg)
+{
+	int ret = 0;
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+	struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+	unsigned long flags;
+
+	spin_lock_irqsave(&e->pending_lock, flags);
+	/* Only one in-flight Transfer is allowed per-doorbell */
+	if (!(e->pending_db[priv->ch_idx] & BIT(priv->doorbell))) {
+		e->pending_db[priv->ch_idx] |= BIT(priv->doorbell);
+		writel_relaxed(BIT(priv->doorbell),
+			       &mhu->pbx->dbcw[priv->ch_idx].set);
+	} else {
+		ret = -EBUSY;
+	}
+	spin_unlock_irqrestore(&e->pending_lock, flags);
+
+	return ret;
+}
+
+static const struct mhuv3_protocol_ops mhuv3_doorbell_ops = {
+	.tx_startup = mhuv3_doorbell_tx_startup,
+	.tx_shutdown = mhuv3_doorbell_tx_shutdown,
+	.rx_startup = mhuv3_doorbell_rx_startup,
+	.rx_shutdown = mhuv3_doorbell_rx_shutdown,
+	.rx_complete = mhuv3_doorbell_rx_complete,
+	.last_tx_done = mhuv3_doorbell_last_tx_done,
+	.send_data = mhuv3_doorbell_send_data,
+};
+
+/* Sender and receiver mailbox ops */
+static bool mhuv3_sender_last_tx_done(struct mbox_chan *chan)
+{
+	struct mhuv3 *mhu = mhu_from_mbox(chan->mbox);
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	return priv->ops->last_tx_done(mhu, chan);
+}
+
+static int mhuv3_sender_send_data(struct mbox_chan *chan, void *data)
+{
+	struct mhuv3 *mhu = mhu_from_mbox(chan->mbox);
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	if (!priv->ops->last_tx_done(mhu, chan))
+		return -EBUSY;
+
+	return priv->ops->send_data(mhu, chan, data);
+}
+
+static int mhuv3_sender_startup(struct mbox_chan *chan)
+{
+	struct mhuv3 *mhu = mhu_from_mbox(chan->mbox);
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	if (priv->ops->tx_startup)
+		priv->ops->tx_startup(mhu, chan);
+
+	return 0;
+}
+
+static void mhuv3_sender_shutdown(struct mbox_chan *chan)
+{
+	struct mhuv3 *mhu = mhu_from_mbox(chan->mbox);
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	if (priv->ops->tx_shutdown)
+		priv->ops->tx_shutdown(mhu, chan);
+}
+
+static const struct mbox_chan_ops mhuv3_sender_ops = {
+	.send_data = mhuv3_sender_send_data,
+	.startup = mhuv3_sender_startup,
+	.shutdown = mhuv3_sender_shutdown,
+	.last_tx_done = mhuv3_sender_last_tx_done,
+};
+
+static int mhuv3_receiver_startup(struct mbox_chan *chan)
+{
+	struct mhuv3 *mhu = mhu_from_mbox(chan->mbox);
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	return priv->ops->rx_startup(mhu, chan);
+}
+
+static void mhuv3_receiver_shutdown(struct mbox_chan *chan)
+{
+	struct mhuv3 *mhu = mhu_from_mbox(chan->mbox);
+	struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+	priv->ops->rx_shutdown(mhu, chan);
+}
+
+static int mhuv3_receiver_send_data(struct mbox_chan *chan, void *data)
+{
+	dev_err(chan->mbox->dev,
+		"Trying to transmit on a MBX MHUv3 frame\n");
+	return -EIO;
+}
+
+static bool mhuv3_receiver_last_tx_done(struct mbox_chan *chan)
+{
+	dev_err(chan->mbox->dev, "Trying to Tx poll on a MBX MHUv3 frame\n");
+	return true;
+}
+
+static const struct mbox_chan_ops mhuv3_receiver_ops = {
+	.send_data = mhuv3_receiver_send_data,
+	.startup = mhuv3_receiver_startup,
+	.shutdown = mhuv3_receiver_shutdown,
+	.last_tx_done = mhuv3_receiver_last_tx_done,
+};
+
+static struct mbox_chan *mhuv3_dbe_mbox_of_xlate(struct mhuv3 *mhu,
+						 unsigned int channel,
+						 unsigned int doorbell)
+{
+	struct mbox_controller *mbox = &mhu->mbox;
+	struct mbox_chan *chans = mbox->chans;
+	struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+
+	if (channel >= e->max_chans || doorbell >= MHUV3_STAT_BITS) {
+		dev_err(mbox->dev, "Couldn't xlate to a valid channel (%d: %d)\n",
+			channel, doorbell);
+		return ERR_PTR(-ENODEV);
+	}
+
+	return &chans[e->base_ch_idx + channel * MHUV3_STAT_BITS + doorbell];
+}
+
+static void mhuv3_dbe_combined_irq_setup(struct mhuv3 *mhu)
+{
+	int i;
+	struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+
+	if (mhu->frame == PBX_FRAME) {
+		struct pdbcw_page __iomem *dbcw = mhu->pbx->dbcw;
+
+		for (i = 0; i < e->max_chans; i++) {
+			writel_relaxed_bitfield(0x1, &dbcw[i].int_clr, tfr_ack);
+			writel_relaxed_bitfield(0x0, &dbcw[i].int_en, tfr_ack);
+			writel_relaxed_bitfield(0x1, &dbcw[i].ctrl, comb_en);
+		}
+	} else {
+		struct mdbcw_page __iomem *dbcw = mhu->mbx->dbcw;
+
+		for (i = 0; i < e->max_chans; i++) {
+			writel_relaxed(0xFFFFFFFF, &dbcw[i].clr);
+			writel_relaxed(0xFFFFFFFF, &dbcw[i].msk_set);
+			writel_relaxed_bitfield(0x1, &dbcw[i].ctrl, comb_en);
+		}
+	}
+}
+
+static int mhuv3_dbe_channels_init(struct mhuv3 *mhu)
+{
+	int i;
+	struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+	struct mbox_controller *mbox = &mhu->mbox;
+	struct mbox_chan *chans;
+
+	chans = mbox->chans + mbox->num_chans;
+	e->base_ch_idx = mbox->num_chans;
+	for (i = 0; i < e->max_chans; i++) {
+		int k;
+		struct mhuv3_mbox_chan_priv *priv;
+
+		for (k = 0; k < MHUV3_STAT_BITS; k++) {
+			priv = devm_kmalloc(mbox->dev, sizeof(*priv), GFP_KERNEL);
+			if (!priv)
+				return -ENOMEM;
+
+			priv->ch_idx = i;
+			priv->ops = &mhuv3_doorbell_ops;
+			priv->doorbell = k;
+			chans++->con_priv = priv;
+			mbox->num_chans++;
+		}
+	}
+
+	spin_lock_init(&e->pending_lock);
+
+	return 0;
+}
+
+static struct mbox_chan *mhuv3_dbe_chan_from_comb_irq_get(struct mhuv3 *mhu)
+{
+	int i;
+	struct mhuv3_extension *e = mhu->ext[DBE_EXT];
+	struct device *dev = mhu->mbox.dev;
+
+	for (i = 0; i < MHUV3_DBCH_CMB_INT_ST_REG_CNT; i++) {
+		unsigned int channel, db = MHUV3_INVALID_DOORBELL;
+		u32 cmb_st, st;
+
+		cmb_st = readl_relaxed(&mhu->ctrl->dbch_int_st[i]);
+		if (!cmb_st)
+			continue;
+
+		channel = i * MHUV3_STAT_BITS + __builtin_ctz(cmb_st);
+		if (channel >= e->max_chans) {
+			dev_err(dev, "Invalid %s channel:%d\n",
+				mhuv3_str[mhu->frame], channel);
+			break;
+		}
+
+		if (mhu->frame == PBX_FRAME) {
+			unsigned long flags;
+			u32 active_dbs, fired_dbs;
+
+			st = readl_relaxed_bitfield(&mhu->pbx->dbcw[channel].int_st,
+						    tfr_ack);
+			if (!st) {
+				dev_warn(dev, "Spurios IRQ on %s channel:%d\n",
+					 mhuv3_str[mhu->frame], channel);
+				continue;
+			}
+
+			active_dbs = readl_relaxed(&mhu->pbx->dbcw[channel].st);
+			spin_lock_irqsave(&e->pending_lock, flags);
+			fired_dbs = e->pending_db[channel] & ~active_dbs;
+			if (fired_dbs) {
+				db = __builtin_ctz(fired_dbs);
+				e->pending_db[channel] &= ~BIT(db);
+				fired_dbs &= ~BIT(db);
+			}
+			spin_unlock_irqrestore(&e->pending_lock, flags);
+
+			/* Clear TFR Ack if no more doorbells pending */
+			if (!fired_dbs)
+				writel_relaxed_bitfield(0x1,
+							&mhu->pbx->dbcw[channel].int_clr,
+							tfr_ack);
+		} else {
+			st = readl_relaxed(&mhu->mbx->dbcw[channel].st_msk);
+			if (!st) {
+				dev_warn(dev, "Spurios IRQ on %s channel:%d\n",
+					 mhuv3_str[mhu->frame], channel);
+				continue;
+			}
+			db = __builtin_ctz(st);
+		}
+
+		if (db != MHUV3_INVALID_DOORBELL) {
+			dev_dbg(dev, "Found %s ch[%d]/db[%d]\n",
+				mhuv3_str[mhu->frame], channel, db);
+
+			return &mhu->mbox.chans[channel * MHUV3_STAT_BITS + db];
+		}
+	}
+
+	return ERR_PTR(-EIO);
+}
+
+static int mhuv3_dbe_init(struct mhuv3 *mhu)
+{
+	struct mhuv3_extension *e;
+	struct device *dev = mhu->mbox.dev;
+
+	if (!readl_relaxed_bitfield(&mhu->ctrl->feat_spt0, dbe_spt))
+		return 0;
+
+	dev_dbg(dev, "%s: Initializing DBE Extension.\n", mhuv3_str[mhu->frame]);
+
+	e = devm_kzalloc(dev, sizeof(*e), GFP_KERNEL);
+	if (!e)
+		return -ENOMEM;
+
+	e->type = DBE_EXT;
+	/* Note that, by the spec, the number of channels is (num_dbch + 1) */
+	e->max_chans =
+		readl_relaxed_bitfield(&mhu->ctrl->dbch_cfg0, num_dbch) + 1;
+	e->mbox_of_xlate = mhuv3_dbe_mbox_of_xlate;
+	e->combined_irq_setup = mhuv3_dbe_combined_irq_setup;
+	e->channels_init = mhuv3_dbe_channels_init;
+	e->chan_from_comb_irq_get = mhuv3_dbe_chan_from_comb_irq_get;
+
+	mhu->tot_chans += e->max_chans * MHUV3_STAT_BITS;
+	mhu->ext[DBE_EXT] = e;
+
+	dev_info(dev, "%s: found %d DBE channels.\n",
+		 mhuv3_str[mhu->frame], e->max_chans);
+
+	return 0;
+}
+
+static int mhuv3_fce_init(struct mhuv3 *mhu)
+{
+	struct device *dev = mhu->mbox.dev;
+
+	if (!readl_relaxed_bitfield(&mhu->ctrl->feat_spt0, fce_spt))
+		return 0;
+
+	dev_dbg(dev, "%s: FCE Extension not supported by driver.\n",
+		mhuv3_str[mhu->frame]);
+
+	return 0;
+}
+
+static int mhuv3_fe_init(struct mhuv3 *mhu)
+{
+	struct device *dev = mhu->mbox.dev;
+
+	if (!readl_relaxed_bitfield(&mhu->ctrl->feat_spt0, fe_spt))
+		return 0;
+
+	dev_dbg(dev, "%s: FE Extension not supported by driver.\n",
+		mhuv3_str[mhu->frame]);
+
+	return 0;
+}
+
+static mhuv3_extension_initializer mhuv3_extension_init[MAX_EXT] = {
+	mhuv3_dbe_init,
+	mhuv3_fce_init,
+	mhuv3_fe_init,
+};
+
+static int mhuv3_initialize_channels(struct device *dev, struct mhuv3 *mhu)
+{
+	int i, ret = 0;
+	struct mbox_controller *mbox = &mhu->mbox;
+
+	mbox->chans = devm_kcalloc(dev, mhu->tot_chans,
+				   sizeof(*mbox->chans), GFP_KERNEL);
+	if (!mbox->chans)
+		return -ENOMEM;
+
+	for (i = FIRST_EXT; i < MAX_EXT && !ret; i++)
+		if (mhu->ext[i])
+			ret = mhu->ext[i]->channels_init(mhu);
+
+	return ret;
+}
+
+static struct mbox_chan *mhuv3_mbox_of_xlate(struct mbox_controller *mbox,
+					     const struct of_phandle_args *pa)
+{
+	unsigned int type, channel, param;
+	struct mhuv3 *mhu = mhu_from_mbox(mbox);
+
+	if (pa->args_count != MHUV3_MBOX_CELLS)
+		return ERR_PTR(-EINVAL);
+
+	type = pa->args[MHUV3_MBOX_CELL_TYPE];
+	if (type >= MAX_EXT)
+		return ERR_PTR(-EINVAL);
+
+	channel = pa->args[MHUV3_MBOX_CELL_CHWN];
+	param = pa->args[MHUV3_MBOX_CELL_PARAM];
+
+	return mhu->ext[type]->mbox_of_xlate(mhu, channel, param);
+}
+
+static int mhuv3_frame_init(struct mhuv3 *mhu, void __iomem *regs)
+{
+	int i, ret = 0;
+	struct device *dev = mhu->mbox.dev;
+
+	mhu->ctrl = regs;
+	mhu->frame = readl_relaxed_bitfield(&mhu->ctrl->blk_id, blk_id);
+	if (mhu->frame > MBX_FRAME) {
+		dev_err(dev, "Invalid Frame type- %d\n", mhu->frame);
+		return -EINVAL;
+	}
+
+	mhu->major = readl_relaxed_bitfield(&mhu->ctrl->aidr, arch_major_rev);
+	mhu->minor = readl_relaxed_bitfield(&mhu->ctrl->aidr, arch_minor_rev);
+	if (mhu->major != MHUV3_MAJOR_VERSION) {
+		dev_warn(dev, "Unsupported MHU %s block - major:%d  minor:%d\n",
+			 mhuv3_str[mhu->frame], mhu->major, mhu->minor);
+		return -EINVAL;
+	}
+	mhu->auto_op_full = !!readl_relaxed_bitfield(&mhu->ctrl->feat_spt1,
+						     auto_op_spt);
+	/* Request the PBX/MBX to remain operational */
+	if (mhu->auto_op_full)
+		writel_relaxed_bitfield(0x1, &mhu->ctrl->ctrl, op_req);
+
+	dev_dbg(dev, "Found MHU %s block - major:%d  minor:%d\n",
+		mhuv3_str[mhu->frame], mhu->major, mhu->minor);
+
+	if (mhu->frame == PBX_FRAME)
+		mhu->pbx = regs;
+	else
+		mhu->mbx = regs;
+
+	for (i = FIRST_EXT; i < MAX_EXT && !ret; i++)
+		ret = mhuv3_extension_init[i](mhu);
+
+	return ret;
+}
+
+static irqreturn_t mhuv3_pbx_comb_interrupt(int irq, void *arg)
+{
+	int ret = IRQ_NONE;
+	unsigned int i, found = 0;
+	struct mhuv3 *mhu = arg;
+	struct device *dev = mhu->mbox.dev;
+	struct mbox_chan *chan;
+
+	for (i = FIRST_EXT; i < MAX_EXT; i++) {
+		/* FCE does not participate to the PBX combined */
+		if (i == FCE_EXT || !mhu->ext[i])
+			continue;
+
+		chan = mhu->ext[i]->chan_from_comb_irq_get(mhu);
+		if (!IS_ERR(chan)) {
+			struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+			found++;
+			if (chan->cl) {
+				mbox_chan_txdone(chan, 0);
+				ret = IRQ_HANDLED;
+			} else {
+				dev_warn(dev,
+					 "TX Ack on UNBOUND channel (%u)\n",
+					 priv->ch_idx);
+			}
+		}
+	}
+
+	if (!found)
+		dev_warn_once(dev, "Failed to find channel for the TX interrupt\n");
+
+	return ret;
+}
+
+static irqreturn_t mhuv3_mbx_comb_interrupt(int irq, void *arg)
+{
+	int ret = IRQ_NONE;
+	unsigned int i, found = 0;
+	struct mhuv3 *mhu = arg;
+	struct device *dev = mhu->mbox.dev;
+	struct mbox_chan *chan;
+
+	for (i = FIRST_EXT; i < MAX_EXT; i++) {
+		if (!mhu->ext[i])
+			continue;
+
+		/* Process any extension which could be source of the IRQ */
+		chan = mhu->ext[i]->chan_from_comb_irq_get(mhu);
+		if (!IS_ERR(chan)) {
+			void *data = NULL;
+			struct mhuv3_mbox_chan_priv *priv = chan->con_priv;
+
+			found++;
+			/* Read and acknowledge optional in-band LE data first. */
+			if (priv->ops->read_data)
+				data = priv->ops->read_data(mhu, chan);
+
+			if (chan->cl && !IS_ERR(data)) {
+				mbox_chan_received_data(chan, data);
+				ret = IRQ_HANDLED;
+			} else if (!chan->cl) {
+				dev_warn(dev,
+					 "RX Data on UNBOUND channel (%u)\n",
+					 priv->ch_idx);
+			} else {
+				dev_err(dev, "Failed to read data: %lu\n",
+					PTR_ERR(data));
+			}
+
+			if (!IS_ERR(data))
+				kfree(data);
+
+			/*
+			 * Acknowledge transfer after any possible optional
+			 * out-of-band data has also been retrieved via
+			 * mbox_chan_received_data().
+			 */
+			if (priv->ops->rx_complete)
+				priv->ops->rx_complete(mhu, chan);
+		}
+	}
+
+	if (!found)
+		dev_warn_once(dev, "Failed to find channel for the RX interrupt\n");
+
+	return ret;
+}
+
+static int mhuv3_setup_pbx(struct mhuv3 *mhu)
+{
+	struct device *dev = mhu->mbox.dev;
+
+	mhu->mbox.ops = &mhuv3_sender_ops;
+
+	if (mhu->cmb_irq > 0) {
+		int ret;
+
+		ret = devm_request_threaded_irq(dev, mhu->cmb_irq, NULL,
+						mhuv3_pbx_comb_interrupt,
+						IRQF_ONESHOT, "mhuv3-pbx", mhu);
+		if (!ret) {
+			int i;
+
+			mhu->mbox.txdone_irq = true;
+			mhu->mbox.txdone_poll = false;
+
+			for (i = FIRST_EXT; i < MAX_EXT; i++)
+				if (mhu->ext[i])
+					mhu->ext[i]->combined_irq_setup(mhu);
+
+			dev_dbg(dev, "MHUv3 PBX IRQs initialized.\n");
+
+			return 0;
+		}
+
+		dev_err(dev, "Failed to request PBX IRQ - ret:%d", ret);
+	}
+
+	dev_info(dev, "Using PBX in Tx polling mode.\n");
+	mhu->mbox.txdone_irq = false;
+	mhu->mbox.txdone_poll = true;
+	mhu->mbox.txpoll_period = 1;
+
+	return 0;
+}
+
+static int mhuv3_setup_mbx(struct mhuv3 *mhu)
+{
+	int ret, i;
+	struct device *dev = mhu->mbox.dev;
+
+	mhu->mbox.ops = &mhuv3_receiver_ops;
+
+	if (mhu->cmb_irq <= 0) {
+		dev_err(dev, "Missing MBX combined IRQ !\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_threaded_irq(dev, mhu->cmb_irq, NULL,
+					mhuv3_mbx_comb_interrupt, IRQF_ONESHOT,
+					"mhuv3-mbx", mhu);
+	if (ret) {
+		dev_err(dev, "Failed to request MBX IRQ - ret:%d\n", ret);
+		return ret;
+	}
+
+	for (i = FIRST_EXT; i < MAX_EXT; i++)
+		if (mhu->ext[i])
+			mhu->ext[i]->combined_irq_setup(mhu);
+
+	dev_dbg(dev, "MHUv3 MBX IRQs initialized.\n");
+
+	return ret;
+}
+
+static int mhuv3_irqs_init(struct mhuv3 *mhu, struct platform_device *pdev)
+{
+	int ret;
+
+	dev_dbg(mhu->mbox.dev, "Initializing %s block.\n", mhuv3_str[mhu->frame]);
+
+	if (mhu->frame == PBX_FRAME) {
+		mhu->cmb_irq = platform_get_irq_byname_optional(pdev, "combined");
+		ret = mhuv3_setup_pbx(mhu);
+	} else {
+		mhu->cmb_irq = platform_get_irq_byname(pdev, "combined");
+		ret = mhuv3_setup_mbx(mhu);
+	}
+
+	return ret;
+}
+
+static int mhuv3_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct mhuv3 *mhu;
+	void __iomem *regs;
+	struct device *dev = &pdev->dev;
+
+	mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
+	if (!mhu)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	mhu->mbox.dev = dev;
+	ret = mhuv3_frame_init(mhu, regs);
+	if (ret)
+		return ret;
+
+	ret = mhuv3_irqs_init(mhu, pdev);
+	if (ret)
+		return ret;
+
+	mhu->mbox.of_xlate = mhuv3_mbox_of_xlate;
+	ret = mhuv3_initialize_channels(dev, mhu);
+	if (ret)
+		return ret;
+
+	ret = devm_mbox_controller_register(dev, &mhu->mbox);
+	if (ret)
+		dev_err(dev, "failed to register ARM MHUv3 driver %d\n", ret);
+
+	platform_set_drvdata(pdev, mhu);
+
+	return ret;
+}
+
+static int mhuv3_remove(struct platform_device *pdev)
+{
+	struct mhuv3 *mhu = platform_get_drvdata(pdev);
+
+	if (mhu->auto_op_full)
+		writel_relaxed_bitfield(0x0, &mhu->ctrl->ctrl, op_req);
+
+	return 0;
+}
+
+static const struct of_device_id mhuv3_of_match[] = {
+	{ .compatible = "arm,mhuv3", .data = NULL },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mhuv3_of_match);
+
+static struct platform_driver mhuv3_driver = {
+	.driver = {
+		.name = "arm-mhuv3-mailbox",
+		.of_match_table = mhuv3_of_match,
+	},
+	.probe = mhuv3_probe,
+	.remove = mhuv3_remove,
+};
+module_platform_driver(mhuv3_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ARM MHUv3 Driver");
+MODULE_AUTHOR("Cristian Marussi <cristian.marussi@arm.com>");
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings
  2024-04-03 17:13 ` [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings Cristian Marussi
@ 2024-04-03 18:24   ` Rob Herring
  2024-04-04  2:01   ` kernel test robot
  1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring @ 2024-04-03 18:24 UTC (permalink / raw)
  To: Cristian Marussi
  Cc: sudeep.holla, conor+dt, linux-arm-kernel, linux-kernel,
	jassisinghbrar, robh+dt, krzysztof.kozlowski+dt, devicetree


On Wed, 03 Apr 2024 18:13:45 +0100, Cristian Marussi wrote:
> Add bindings for the ARM MHUv3 Mailbox controller.
> 
> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> ---
> v1 -> v2
> - clarified extension descriptions around configurability and discoverability
> - removed unused labels from the example
> - using pattern properties to define interrupt-names
> - bumped interrupt maxItems to 74 (allowing uo to 8 channels per extension)
> ---
>  .../bindings/mailbox/arm,mhuv3.yaml           | 217 ++++++++++++++++++
>  1 file changed, 217 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml:86:1: [error] syntax error: found character '\t' that cannot start any token (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/mailbox/arm,mhuv3.example.dts'
Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml:86:1: found a tab character where an indentation space is expected
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/mailbox/arm,mhuv3.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml:86:1: found a tab character where an indentation space is expected
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240403171346.3173843-2-cristian.marussi@arm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings
  2024-04-03 17:13 ` [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings Cristian Marussi
  2024-04-03 18:24   ` Rob Herring
@ 2024-04-04  2:01   ` kernel test robot
  1 sibling, 0 replies; 5+ messages in thread
From: kernel test robot @ 2024-04-04  2:01 UTC (permalink / raw)
  To: Cristian Marussi, linux-kernel, linux-arm-kernel, devicetree
  Cc: oe-kbuild-all, sudeep.holla, cristian.marussi, jassisinghbrar,
	robh+dt, krzysztof.kozlowski+dt, conor+dt

Hi Cristian,

kernel test robot noticed the following build warnings:

[auto build test WARNING on soc/for-next]
[also build test WARNING on robh/for-next linus/master v6.9-rc2 next-20240403]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Cristian-Marussi/dt-bindings-mailbox-arm-mhuv3-Add-bindings/20240404-012010
base:   https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
patch link:    https://lore.kernel.org/r/20240403171346.3173843-2-cristian.marussi%40arm.com
patch subject: [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings
compiler: loongarch64-linux-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20240404/202404040918.E8nkWuIn-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202404040918.E8nkWuIn-lkp@intel.com/

dtcheck warnings: (new ones prefixed by >>)
>> Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml:86:1: [error] syntax error: found character '\t' that cannot start any token (syntax)
--
>> Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml:86:1: found a tab character where an indentation space is expected
--
>> Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml: ignoring, error parsing file

vim +86 Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml

     8	
     9	maintainers:
    10	  - Sudeep Holla <sudeep.holla@arm.com>
    11	  - Cristian Marussi <cristian.marussi@arm.com>
    12	
    13	description: |
    14	  The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that
    15	  enables unidirectional communications with remote processors through various
    16	  possible transport protocols.
    17	  The controller can optionally support a varying number of extensions that, in
    18	  turn, enable different kinds of transport to be used for communication.
    19	  Number, type and characteristics of each supported extension can be discovered
    20	  dynamically at runtime.
    21	
    22	  Given the unidirectional nature of the controller, an MHUv3 mailbox controller
    23	  is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU
    24	  Receiver (MHUR) containing a MailBox (MBX) block, where
    25	
    26	   PBX is used to
    27	      - Configure the MHU
    28	      - Send Transfers to the Receiver
    29	      - Optionally receive acknowledgment of a Transfer from the Receiver
    30	
    31	   MBX is used to
    32	      - Configure the MHU
    33	      - Receive Transfers from the Sender
    34	      - Optionally acknowledge Transfers sent by the Sender
    35	
    36	  Both PBX and MBX need to be present and defined in the DT description if you
    37	  need to establish a bidirectional communication, since you will have to
    38	  acquire two distinct unidirectional channels, one for each block.
    39	
    40	  As a consequence both blocks needs to be represented separately and specified
    41	  as distinct DT nodes in order to properly describe their resources.
    42	
    43	  Note that, though, thanks to the runtime discoverability, there is no need to
    44	  identify the type of blocks with distinct compatibles.
    45	
    46	  Following are the MHUv3 possible extensions.
    47	
    48	  - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell
    49	    Channel (DBCH). DBCH enables a single bit Transfer to be sent from the
    50	    Sender to Receiver. The Transfer indicates that an event has occurred.
    51	    When DBE is implemented, the number of DBCHs that an implementation of the
    52	    MHU can support is between 1 and 128, numbered starting from 0 in ascending
    53	    order and discoverable at run-time.
    54	    Each DBCH contains 32 individual fields, referred to as flags, each of which
    55	    can be used independently. It is possible for the Sender to send multiple
    56	    Transfers at once using a single DBCH, so long as each Transfer uses
    57	    a different flag in the DBCH.
    58	    Optionally, data may be transmitted through an out-of-band shared memory
    59	    region, wherein the MHU Doorbell is used strictly as an interrupt generation
    60	    mechanism, but this is out of the scope of these bindings.
    61	
    62	  - FastChannel Extension (FCE): FCE defines a type of channel called a Fast
    63	    Channel (FCH). FCH is intended for lower overhead communication between
    64	    Sender and Receiver at the expense of determinism. An FCH allows the Sender
    65	    to update the channel value at any time, regardless of whether the previous
    66	    value has been seen by the Receiver. When the Receiver reads the channel's
    67	    content it gets the last value written to the channel.
    68	    FCH is considered lossy in nature, and means that the Sender has no way of
    69	    knowing if, or when, the Receiver will act on the Transfer.
    70	    FCHs are expected to behave as RAM which generates interrupts when writes
    71	    occur to the locations within the RAM.
    72	    When FCE is implemented, the number of FCHs that an implementation of the
    73	    MHU can support is between 1-1024, if the FastChannel word-size is 32-bits,
    74	    or between 1-512, when the FastChannel word-size is 64-bits.
    75	    FCHs are numbered from 0 in ascending order.
    76	    Note that the number of FCHs and the word-size are implementation defined,
    77	    not configurable but discoverable at run-time.
    78	    Optionally, data may be transmitted through an out-of-band shared memory
    79	    region, wherein the MHU FastChannel is used as an interrupt generation
    80	    mechanism which carries also a pointer to such out-of-band data, but this
    81	    is out of the scope of these bindings.
    82	
    83	  - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH).
    84	    FFCH allows a Sender to send
    85	       - Multiple Transfers to the Receiver without having to wait for the
  > 86		 previous Transfer to be acknowledged by the Receiver, as long as the
    87		 FIFO has room for the Transfer.
    88	       - Transfers which require the Receiver to provide acknowledgment.
    89	       - Transfers which have in-band payload.
    90	    In all cases, the data is guaranteed to be observed by the Receiver in the
    91	    same order which the Sender sent it.
    92	    When FE is implemented, the number of FFCHs that an implementation of the
    93	    MHU can support is between 1 and 64, numbered starting from 0 in ascending
    94	    order. The number of FFCHs, their depth (same for all implemented FFCHs) and
    95	    the access-granularity are implementation defined, not configurable but
    96	    discoverable at run-time.
    97	    Optionally, additional data may be transmitted through an out-of-band shared
    98	    memory region, wherein the MHU FIFO is used to transmit, in order, a small
    99	    part of the payload (like a header) and a reference to the shared memory
   100	    area holding the remaining, bigger, chunk of the payload, but this is out of
   101	    the scope of these bindings.
   102	
   103	properties:
   104	  compatible:
   105	    const: arm,mhuv3
   106	
   107	  reg:
   108	    maxItems: 1
   109	
   110	  interrupts:
   111	    minItems: 1
   112	    maxItems: 74
   113	
   114	  interrupt-names:
   115	    description: |
   116	      The MHUv3 controller generates a number of events some of which are used
   117	      to generate interrupts; as a consequence it can expose a varying number of
   118	      optional PBX/MBX interrupts, representing the events generated during the
   119	      operation of the various transport protocols associated with different
   120	      extensions. All interrupts of the MHU are level-sensitive.
   121	      Some of these optional interrupts are defined per-channel, where the
   122	      number of channels effectively available is implementation defined and
   123	      run-time discoverable.
   124	      In the following names are enumerated using patterns, with per-channel
   125	      interrupts implicitly capped at the maximum channels allowed by the
   126	      specification for each extension type.
   127	      For the sake of simplicity maxItems is anyway capped to a most plausible
   128	      number, assuming way less channels would be implemented than actually
   129	      possible.
   130	
   131	      The only mandatory interrupts on the MHU are:
   132	        - combined
   133	        - mbx-fch-xfer-<N> but only if mbx-fcgrp-xfer-<N> is not implemented.
   134	
   135	    minItems: 1
   136	    maxItems: 74
   137	    items:
   138	      oneOf:
   139	        - const: combined
   140	          description: PBX/MBX Combined interrupt
   141	        - const: combined-ffch
   142	          description: PBX/MBX FIFO Combined interrupt
   143	        - pattern: '^ffch-low-tide-[0-9]+$'
   144	          description: PBX/MBX FIFO Channel <N> Low Tide interrupt
   145	        - pattern: '^ffch-high-tide-[0-9]+$'
   146	          description: PBX/MBX FIFO Channel <N> High Tide interrupt
   147	        - pattern: '^ffch-flush-[0-9]+$'
   148	          description: PBX/MBX FIFO Channel <N> Flush interrupt
   149	        - pattern: '^mbx-dbch-xfer-[0-9]+$'
   150	          description: MBX Doorbell Channel <N> Transfer interrupt
   151	        - pattern: '^mbx-fch-xfer-[0-9]+$'
   152	          description: MBX FastChannel <N> Transfer interrupt
   153	        - pattern: '^mbx-fchgrp-xfer-[0-9]+$'
   154	          description: MBX FastChannel <N> Group Transfer interrupt
   155	        - pattern: '^mbx-ffch-xfer-[0-9]+$'
   156	          description: MBX FIFO Channel <N> Transfer interrupt
   157	        - pattern: '^pbx-dbch-xfer-ack-[0-9]+$'
   158	          description: PBX Doorbell Channel <N> Transfer Ack interrupt
   159	        - pattern: '^pbx-ffch-xfer-ack-[0-9]+$'
   160	          description: PBX FIFO Channel <N> Transfer Ack interrupt
   161	
   162	  '#mbox-cells':
   163	    description: |
   164	      The first argument in the consumers 'mboxes' property represents the
   165	      extension type, the second is for the channel number while the third
   166	      depends on extension type.
   167	
   168	      Extension type for DBE is 0 and the third parameter represents the
   169	      doorbell flag number to use.
   170	      Extension type for FCE is 1, third parameter unused.
   171	      Extension type for FE is 2, third parameter unused.
   172	
   173	      mboxes = <&mhu 0 0 5>; // DBE, Doorbell Channel Window 0, doorbell flag 5.
   174	      mboxes = <&mhu 0 1 7>; // DBE, Doorbell Channel Window 1, doorbell flag 7.
   175	      mboxes = <&mhu 1 0 0>; // FCE, FastChannel Window 0.
   176	      mboxes = <&mhu 1 3 0>; // FCE, FastChannel Window 3.
   177	      mboxes = <&mhu 2 1 0>; // FE, FIFO Channel Window 1.
   178	      mboxes = <&mhu 2 7 0>; // FE, FIFO Channel Window 7.
   179	    const: 3
   180	
   181	  clocks:
   182	    maxItems: 1
   183	
   184	required:
   185	  - compatible
   186	  - reg
   187	  - interrupts
   188	  - interrupt-names
   189	  - '#mbox-cells'
   190	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-04-04  2:02 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-04-03 17:13 [PATCH v2 0/2] Add initial ARM MHUv3 mailbox support Cristian Marussi
2024-04-03 17:13 ` [PATCH v2 1/2] dt-bindings: mailbox: arm,mhuv3: Add bindings Cristian Marussi
2024-04-03 18:24   ` Rob Herring
2024-04-04  2:01   ` kernel test robot
2024-04-03 17:13 ` [PATCH v2 2/2] mailbox: arm_mhuv3: Add driver Cristian Marussi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).