[PATCH v3 1/5] usb: ehci-exynos: Use devm_clk_get_enabled() helpers

[PATCH v3 1/5] usb: ehci-exynos: Use devm_clk_get_enabled() helpers

[Anand Moon]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: drop dev_err_probe to simplify the error handle.

v2: drop the clk_disable_unprepare in suspend/resume functions
    fix the usb_put_hcd return before the devm_clk_get_enabled
---
 drivers/usb/host/ehci-exynos.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index f644b131cc0b..e2303757bc0f 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -159,20 +159,16 @@ static int exynos_ehci_probe(struct platform_device *pdev)
 
 	err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
 	if (err)
-		goto fail_clk;
+		goto fail_io;
 
-	exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
+	exynos_ehci->clk = devm_clk_get_enabled(&pdev->dev, "usbhost");
 
 	if (IS_ERR(exynos_ehci->clk)) {
 		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
 		err = PTR_ERR(exynos_ehci->clk);
-		goto fail_clk;
+		goto fail_io;
 	}
 
-	err = clk_prepare_enable(exynos_ehci->clk);
-	if (err)
-		goto fail_clk;
-
 	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
@@ -223,8 +219,6 @@ static int exynos_ehci_probe(struct platform_device *pdev)
 	exynos_ehci_phy_disable(&pdev->dev);
 	pdev->dev.of_node = exynos_ehci->of_node;
 fail_io:
-	clk_disable_unprepare(exynos_ehci->clk);
-fail_clk:
 	usb_put_hcd(hcd);
 	return err;
 }
@@ -240,8 +234,6 @@ static void exynos_ehci_remove(struct platform_device *pdev)
 
 	exynos_ehci_phy_disable(&pdev->dev);
 
-	clk_disable_unprepare(exynos_ehci->clk);
-
 	usb_put_hcd(hcd);
 }
 
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/5] usb: ehci-exynos: Use devm_clk_get_enabled() helpers

[Alan Stern]

On Fri, Apr 12, 2024 at 07:52:50PM +0530, Anand Moon wrote:
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the calls to clk_disable_unprepare().
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---

For patches 1 - 4:

Reviewed-by: Alan Stern <stern@rowland.harvard.edu>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/5] usb: ehci-exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions

[Anand Moon]

This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used.

Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: fix using new DEFINE_SIMPLE_DEV_PM_OPS PM macro hence
    change the $subject and the commit message

v2: add __maybe_unused to suspend/resume functions in case CONFIG_PM
    is disabled.
    dropped RUNTIME_PM_OPS
---
 drivers/usb/host/ehci-exynos.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index e2303757bc0f..f40bc2a7a124 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -237,7 +237,6 @@ static void exynos_ehci_remove(struct platform_device *pdev)
 	usb_put_hcd(hcd);
 }
 
-#ifdef CONFIG_PM
 static int exynos_ehci_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -280,15 +279,9 @@ static int exynos_ehci_resume(struct device *dev)
 	ehci_resume(hcd, false);
 	return 0;
 }
-#else
-#define exynos_ehci_suspend	NULL
-#define exynos_ehci_resume	NULL
-#endif
 
-static const struct dev_pm_ops exynos_ehci_pm_ops = {
-	.suspend	= exynos_ehci_suspend,
-	.resume		= exynos_ehci_resume,
-};
+static DEFINE_SIMPLE_DEV_PM_OPS(exynos_ehci_pm_ops,
+				exynos_ehci_suspend, exynos_ehci_resume);
 
 #ifdef CONFIG_OF
 static const struct of_device_id exynos_ehci_match[] = {
@@ -304,7 +297,7 @@ static struct platform_driver exynos_ehci_driver = {
 	.shutdown	= usb_hcd_platform_shutdown,
 	.driver = {
 		.name	= "exynos-ehci",
-		.pm	= &exynos_ehci_pm_ops,
+		.pm	= pm_ptr(&exynos_ehci_pm_ops),
 		.of_match_table = of_match_ptr(exynos_ehci_match),
 	}
 };
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/5] usb: ohci-exynos: Use devm_clk_get_enabled() helpers

[Anand Moon]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
      call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: drop dev_err_probe to simplify the error handle.

v2: new patch in this series
---
 drivers/usb/host/ohci-exynos.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 20e26a474591..89e6587c089b 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -135,20 +135,16 @@ static int exynos_ohci_probe(struct platform_device *pdev)
 
 	err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci);
 	if (err)
-		goto fail_clk;
+		goto fail_io;
 
-	exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
+	exynos_ohci->clk = devm_clk_get_enabled(&pdev->dev, "usbhost");
 
 	if (IS_ERR(exynos_ohci->clk)) {
 		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
 		err = PTR_ERR(exynos_ohci->clk);
-		goto fail_clk;
+		goto fail_io;
 	}
 
-	err = clk_prepare_enable(exynos_ohci->clk);
-	if (err)
-		goto fail_clk;
-
 	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
@@ -191,8 +187,6 @@ static int exynos_ohci_probe(struct platform_device *pdev)
 	exynos_ohci_phy_disable(&pdev->dev);
 	pdev->dev.of_node = exynos_ohci->of_node;
 fail_io:
-	clk_disable_unprepare(exynos_ohci->clk);
-fail_clk:
 	usb_put_hcd(hcd);
 	return err;
 }
@@ -208,8 +202,6 @@ static void exynos_ohci_remove(struct platform_device *pdev)
 
 	exynos_ohci_phy_disable(&pdev->dev);
 
-	clk_disable_unprepare(exynos_ohci->clk);
-
 	usb_put_hcd(hcd);
 }
 
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/5] usb: ohci-exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions

[Anand Moon]

This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used.

Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: fix using new DEFINE_SIMPLE_DEV_PM_OPS PM macro hence
    change the $subject and the commit message

v2: new file
---
 drivers/usb/host/ohci-exynos.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 89e6587c089b..3c4d68fd5c33 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -213,7 +213,6 @@ static void exynos_ohci_shutdown(struct platform_device *pdev)
 		hcd->driver->shutdown(hcd);
 }
 
-#ifdef CONFIG_PM
 static int exynos_ohci_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -250,19 +249,13 @@ static int exynos_ohci_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define exynos_ohci_suspend	NULL
-#define exynos_ohci_resume	NULL
-#endif
 
 static const struct ohci_driver_overrides exynos_overrides __initconst = {
 	.extra_priv_size =	sizeof(struct exynos_ohci_hcd),
 };
 
-static const struct dev_pm_ops exynos_ohci_pm_ops = {
-	.suspend	= exynos_ohci_suspend,
-	.resume		= exynos_ohci_resume,
-};
+static DEFINE_SIMPLE_DEV_PM_OPS(exynos_ohci_pm_ops,
+				exynos_ohci_suspend, exynos_ohci_resume);
 
 #ifdef CONFIG_OF
 static const struct of_device_id exynos_ohci_match[] = {
@@ -278,7 +271,7 @@ static struct platform_driver exynos_ohci_driver = {
 	.shutdown	= exynos_ohci_shutdown,
 	.driver = {
 		.name	= "exynos-ohci",
-		.pm	= &exynos_ohci_pm_ops,
+		.pm	= pm_ptr(&exynos_ohci_pm_ops),
 		.of_match_table	= of_match_ptr(exynos_ohci_match),
 	}
 };
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 5/5] usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions

[Anand Moon]

This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used.

Also make use of pm_sleep_ptr() to discard all PM_SLEEP related
stuff if CONFIG_PM_SLEEP isn't enabled.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v3: fix using new DEFINE_SIMPLE_DEV_PM_OPS PM macro hence
    change the $subject and the commit message

v2: add __maybe_unused to suspend/resume functions in case CONFIG_PM
   is disabled.
---
 drivers/usb/dwc3/dwc3-exynos.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 5d365ca51771..3427522a7c6a 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -187,7 +187,6 @@ static const struct of_device_id exynos_dwc3_match[] = {
 };
 MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
 
-#ifdef CONFIG_PM_SLEEP
 static int dwc3_exynos_suspend(struct device *dev)
 {
 	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
@@ -230,14 +229,8 @@ static int dwc3_exynos_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume)
-};
-
-#define DEV_PM_OPS	(&dwc3_exynos_dev_pm_ops)
-#else
-#define DEV_PM_OPS	NULL
-#endif /* CONFIG_PM_SLEEP */
+static DEFINE_SIMPLE_DEV_PM_OPS(dwc3_exynos_dev_pm_ops,
+				dwc3_exynos_suspend, dwc3_exynos_resume);
 
 static struct platform_driver dwc3_exynos_driver = {
 	.probe		= dwc3_exynos_probe,
@@ -245,7 +238,7 @@ static struct platform_driver dwc3_exynos_driver = {
 	.driver		= {
 		.name	= "exynos-dwc3",
 		.of_match_table = exynos_dwc3_match,
-		.pm	= DEV_PM_OPS,
+		.pm	= pm_sleep_ptr(&dwc3_exynos_dev_pm_ops),
 	},
 };
 
-- 
2.44.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 5/5] usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions

[Thinh Nguyen]

On Fri, Apr 12, 2024, Anand Moon wrote:
> This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
> care about when the functions are actually used.
> 
> Also make use of pm_sleep_ptr() to discard all PM_SLEEP related
> stuff if CONFIG_PM_SLEEP isn't enabled.
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> v3: fix using new DEFINE_SIMPLE_DEV_PM_OPS PM macro hence
>     change the $subject and the commit message
> 
> v2: add __maybe_unused to suspend/resume functions in case CONFIG_PM
>    is disabled.
> ---
>  drivers/usb/dwc3/dwc3-exynos.c | 13 +++----------
>  1 file changed, 3 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
> index 5d365ca51771..3427522a7c6a 100644
> --- a/drivers/usb/dwc3/dwc3-exynos.c
> +++ b/drivers/usb/dwc3/dwc3-exynos.c
> @@ -187,7 +187,6 @@ static const struct of_device_id exynos_dwc3_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
>  
> -#ifdef CONFIG_PM_SLEEP
>  static int dwc3_exynos_suspend(struct device *dev)
>  {
>  	struct dwc3_exynos *exynos = dev_get_drvdata(dev);
> @@ -230,14 +229,8 @@ static int dwc3_exynos_resume(struct device *dev)
>  	return 0;
>  }
>  
> -static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = {
> -	SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume)
> -};
> -
> -#define DEV_PM_OPS	(&dwc3_exynos_dev_pm_ops)
> -#else
> -#define DEV_PM_OPS	NULL
> -#endif /* CONFIG_PM_SLEEP */
> +static DEFINE_SIMPLE_DEV_PM_OPS(dwc3_exynos_dev_pm_ops,
> +				dwc3_exynos_suspend, dwc3_exynos_resume);
>  
>  static struct platform_driver dwc3_exynos_driver = {
>  	.probe		= dwc3_exynos_probe,
> @@ -245,7 +238,7 @@ static struct platform_driver dwc3_exynos_driver = {
>  	.driver		= {
>  		.name	= "exynos-dwc3",
>  		.of_match_table = exynos_dwc3_match,
> -		.pm	= DEV_PM_OPS,
> +		.pm	= pm_sleep_ptr(&dwc3_exynos_dev_pm_ops),
>  	},
>  };
>  
> -- 
> 2.44.0
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

Thanks,
Thinh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel