Re: [PATCH v4 1/2] PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handling

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Sat, Apr 13, 2024 at 09:41:19AM +0900, Damien Le Moal wrote:
> The PCIe specifications (PCIe CEM r5.1, sec 2.9.2) mandate that the
> PERST# signal must remain asserted for at least 100 usec (Tperst-clk)
> after the PCIe reference clock becomes stable (if a reference clock is
> supplied), and for at least 100 msec after the power is stable (Tpvperl,
> defined by the macro PCIE_T_PVPERL_MS).
> 
> Modify rockchip_pcie_host_init_port() to satisfy these constraints by
> adding a sleep period before deasserting PERST# using the ep_gpio GPIO.
> Since Tperst-clk is the shorter wait time, add an msleep() call for the
> longer PCIE_T_PVPERL_MS milliseconds to handle both timing requirements.
> 
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/pci/controller/pcie-rockchip-host.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
> index 300b9dc85ecc..fc868251e570 100644
> --- a/drivers/pci/controller/pcie-rockchip-host.c
> +++ b/drivers/pci/controller/pcie-rockchip-host.c
> @@ -322,6 +322,7 @@ static int rockchip_pcie_host_init_port(struct rockchip_pcie *rockchip)
>  	rockchip_pcie_write(rockchip, PCIE_CLIENT_LINK_TRAIN_ENABLE,
>  			    PCIE_CLIENT_CONFIG);
>  
> +	msleep(PCIE_T_PVPERL_MS);
>  	gpiod_set_value_cansleep(rockchip->ep_gpio, 1);
>  
>  	/* 500ms timeout value should be enough for Gen1/2 training */
> -- 
> 2.44.0
> 
> 

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel