[PATCH 05/20] ARM: dts: stm32: Add alternate pinmux for MP13 ETH2 pins

[Marek Vasut <marex@denx.de>]

Add another mux option for ETH2 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "Leonard Göhrs" <l.goehrs@pengutronix.de>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Nyekjaer <sean@geanix.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
---
 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 45 +++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
index c709d64edcc2d..899f0f98e1a65 100644
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -72,6 +72,51 @@ pins1 {
 		};
 	};
 
+	eth2_rgmii_pins_a: eth2-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 11, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('G', 1, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 6, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('F', 6, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('G', 3, AF10)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('E', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF12)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('A', 8, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 12, AF11)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('H', 11, AF11)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel