* [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI
@ 2024-04-25 16:28 Robert Nelson
2024-04-25 16:28 ` [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai Robert Nelson
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Robert Nelson @ 2024-04-25 16:28 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel, devicetree
Cc: Robert Nelson, Rob Herring, Andrew Davis, Nishanth Menon,
Jared McArthur, Jason Kridner, Deepak Khatri, Drew Fustini
This board is based on ti,j722s family using the am67a variation.
https://beagley-ai.org/
https://openbeagle.org/beagley-ai/beagley-ai
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Rob Herring <robh@kernel.org>
CC: Andrew Davis <afd@ti.com>
CC: Nishanth Menon <nm@ti.com>
CC: Jared McArthur <j-mcarthur@ti.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Deepak Khatri <lorforlinux@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
---
Changes since v1:
- switched to the TI model am67a over the family name j722s
---
Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index 52b51fd7044e..201378cdbd93 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -134,6 +134,7 @@ properties:
- description: K3 J722S SoC and Boards
items:
- enum:
+ - beagle,am67a-beagley-ai
- ti,j722s-evm
- const: ti,j722s
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai 2024-04-25 16:28 [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson @ 2024-04-25 16:28 ` Robert Nelson 2024-04-26 13:22 ` Nishanth Menon 2024-04-25 16:30 ` [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson 2024-04-26 12:22 ` Krzysztof Kozlowski 2 siblings, 1 reply; 5+ messages in thread From: Robert Nelson @ 2024-04-25 16:28 UTC (permalink / raw) To: linux-arm-kernel, linux-kernel, devicetree Cc: Robert Nelson, Andrew Davis, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri, Drew Fustini BeagleBoard.org BeagleY-AI is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM67A, which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 cores for low-power, low-latency GPIO control. https://beagley-ai.org/ https://openbeagle.org/beagley-ai/beagley-ai Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Andrew Davis <afd@ti.com> CC: Nishanth Menon <nm@ti.com> CC: Jared McArthur <j-mcarthur@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Deepak Khatri <lorforlinux@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> --- Changes since v1: - fixed incorrect vdd-3v3-sd-pins-default name - updated hdmi VDD_1V2 regulator for production pcb - switched device tree name from k3-j722s-beagley-ai to k3-am67a-beagley-ai - removed cpsw_port2 node - enable UHS support for MMCSD --- arch/arm64/boot/dts/ti/Makefile | 1 + .../arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 369 ++++++++++++++++++ 2 files changed, 370 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 9a722c2473fb..a61e8902a23d 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoC diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file mode 100644 index 000000000000..cffa1c9ba00d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts @@ -0,0 +1,369 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * https://beagley-ai.org/ + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "beagle,am67a-beagley-ai", "ti,j722s"; + model = "BeagleBoard.org BeagleY-AI"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-mmc1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-TLV71033 { + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + vsys_io_1v8: regulator-vsys-io-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-vsys-io-1v2 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ + >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >; + }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>, <&gbe_pmx_obsclk>; + + assigned-clocks = <&k3_clks 227 0>; + assigned-clock-parents = <&k3_clks 227 6>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; + bootph-all; +}; + +&mcu_pmx0 { + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; + + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (A10) MCU_SPI0_CS1.MCU_OBSCLK0 */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; + bootph-all; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + bootph-all; + + tps65219: pmic@30 { + bootph-all; + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + /* Regulator is left as is unused */ + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_PHY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDDA_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + status = "okay"; + bootph-all; +}; -- 2.39.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai 2024-04-25 16:28 ` [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai Robert Nelson @ 2024-04-26 13:22 ` Nishanth Menon 0 siblings, 0 replies; 5+ messages in thread From: Nishanth Menon @ 2024-04-26 13:22 UTC (permalink / raw) To: Robert Nelson Cc: linux-arm-kernel, linux-kernel, devicetree, Andrew Davis, Jared McArthur, Jason Kridner, Deepak Khatri, Drew Fustini On 11:28-20240425, Robert Nelson wrote: > BeagleBoard.org BeagleY-AI is an easy to use, affordable open source > hardware single board computer based on the Texas Instruments AM67A, > which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose > digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), > GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 > cores for low-power, low-latency GPIO control. > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Andrew Davis <afd@ti.com> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > CC: Drew Fustini <drew@beagleboard.org> > --- A few cosmetic comments to fix up for the next rev: > Changes since v1: > - fixed incorrect vdd-3v3-sd-pins-default name > - updated hdmi VDD_1V2 regulator for production pcb > - switched device tree name from k3-j722s-beagley-ai to k3-am67a-beagley-ai > - removed cpsw_port2 node > - enable UHS support for MMCSD > --- > arch/arm64/boot/dts/ti/Makefile | 1 + > .../arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 369 ++++++++++++++++++ > 2 files changed, 370 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts > > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile > index 9a722c2473fb..a61e8902a23d 100644 > --- a/arch/arm64/boot/dts/ti/Makefile > +++ b/arch/arm64/boot/dts/ti/Makefile > @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb > dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo > > # Boards with J722s SoC > +dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb > dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb > > # Boards with J784s4 SoC > diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts > new file mode 100644 > index 000000000000..cffa1c9ba00d > --- /dev/null > +++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts > @@ -0,0 +1,369 @@ > +// SPDX-License-Identifier: GPL-2.0-only OR MIT > +/* > + * https://beagley-ai.org/ > + * > + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ > + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/net/ti-dp83867.h> > +#include "k3-j722s.dtsi" > + > +/ { > + compatible = "beagle,am67a-beagley-ai", "ti,j722s"; > + model = "BeagleBoard.org BeagleY-AI"; > + > + aliases { > + serial0 = &wkup_uart0; > + serial2 = &main_uart0; > + mmc0 = &sdhci1; > + }; > + > + chosen { > + stdout-path = &main_uart0; > + }; > + > + memory@80000000 { > + /* 4G RAM */ > + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, > + <0x00000008 0x80000000 0x00000000 0x80000000>; > + device_type = "memory"; > + bootph-pre-ram; > + }; > + > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + secure_tfa_ddr: tfa@9e780000 { > + reg = <0x00 0x9e780000 0x00 0x80000>; > + no-map; > + }; > + > + secure_ddr: optee@9e800000 { > + reg = <0x00 0x9e800000 0x00 0x01800000>; > + no-map; > + }; > + > + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { > + compatible = "shared-dma-pool"; > + reg = <0x00 0xa0100000 0x00 0xf00000>; > + no-map; > + }; > + > + }; > + > + vsys_5v0: regulator-1 { > + compatible = "regulator-fixed"; > + regulator-name = "vsys_5v0"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + bootph-all; > + }; > + > + vdd_3v3: regulator-2 { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vsys_5v0>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vdd_mmc1: regulator-mmc1 { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_mmc1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&vdd_3v3_sd_pins_default>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + enable-active-high; > + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; > + bootph-all; > + }; > + > + vdd_sd_dv: regulator-TLV71033 { > + compatible = "regulator-gpio"; > + regulator-name = "tlv71033"; > + pinctrl-names = "default"; > + pinctrl-0 = <&vdd_sd_dv_pins_default>; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + vin-supply = <&vsys_5v0>; > + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; > + states = <1800000 0x0>, > + <3300000 0x1>; you will need bootph-all; here. > + }; > + > + vsys_io_1v8: regulator-vsys-io-1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "vsys_io_1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vsys_io_1v2: regulator-vsys-io-1v2 { > + compatible = "regulator-fixed"; > + regulator-name = "vsys_io_1v2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&main_pmx0 { > + > + main_i2c0_pins_default: main-i2c0-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ > + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ > + >; > + bootph-all; > + }; > + > + main_uart0_pins_default: main-uart0-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ > + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ > + >; > + bootph-all; > + }; > + > + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ > + >; > + bootph-all; > + }; > + > + main_mmc1_pins_default: main-mmc1-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ > + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ > + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ > + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ > + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ > + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ > + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ I suggest using GPIO mode 7 here. (and see below): J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD */ you can optionally enable debounce as well if that is useful. > + >; > + bootph-all; > + }; > + > + mdio_pins_default: mdio-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ > + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ > + >; > + }; > + > + rgmii1_pins_default: rgmii1-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ > + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ > + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ > + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ > + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ > + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ > + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ > + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ > + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ > + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ > + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ > + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ > + >; > + }; > + > + pmic_irq_pins_default: pmic-irq-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ > + >; > + }; > + > + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { > + pinctrl-single,pins = < > + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ > + >; > + }; > +}; > + > +&cpsw3g { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii1_pins_default>, <&gbe_pmx_obsclk>; > + > + assigned-clocks = <&k3_clks 227 0>; > + assigned-clock-parents = <&k3_clks 227 6>; Here and elsewhere: status is last in the list. Please follow the recommendations in: https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > +}; > + > +&cpsw3g_mdio { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mdio_pins_default>; https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > + > + cpsw3g_phy0: ethernet-phy@0 { > + reg = <0>; > + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; > + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; > + ti,min-output-impedance; > + }; > +}; > + > +&cpsw_port1 { > + phy-mode = "rgmii-rxid"; > + phy-handle = <&cpsw3g_phy0>; > + status = "okay"; > +}; > + > +&main_gpio1 { > + status = "okay"; > +}; > + > +&main_uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&main_uart0_pins_default>; > + status = "okay"; > + bootph-all; https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > +}; > + > +&mcu_pmx0 { > + > + wkup_uart0_pins_default: wkup-uart0-default-pins { > + pinctrl-single,pins = < > + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ > + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ > + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ > + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ > + >; > + bootph-all; > + }; > + > + wkup_i2c0_pins_default: wkup-i2c0-default-pins { > + pinctrl-single,pins = < > + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ > + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ > + >; > + bootph-all; > + }; > + > + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { > + pinctrl-single,pins = < > + J722S_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (A10) MCU_SPI0_CS1.MCU_OBSCLK0 */ > + >; > + }; > +}; > + > +&wkup_uart0 { > + /* WKUP UART0 is used by Device Manager firmware */ > + pinctrl-names = "default"; > + pinctrl-0 = <&wkup_uart0_pins_default>; > + status = "reserved"; > + bootph-all; https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > +}; > + > +&wkup_i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&wkup_i2c0_pins_default>; > + clock-frequency = <400000>; > + status = "okay"; > + bootph-all; https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > + > + tps65219: pmic@30 { > + bootph-all; https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node > + compatible = "ti,tps65219"; > + reg = <0x30>; > + buck1-supply = <&vsys_5v0>; > + buck2-supply = <&vsys_5v0>; > + buck3-supply = <&vsys_5v0>; > + ldo1-supply = <&vdd_3v3>; > + ldo3-supply = <&vdd_3v3>; > + ldo4-supply = <&vdd_3v3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_irq_pins_default>; > + interrupt-parent = <&gic500>; > + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + system-power-controller; > + ti,power-button; > + > + regulators { > + buck1_reg: buck1 { > + regulator-name = "VDD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck2_reg: buck2 { > + regulator-name = "VDD_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck3_reg: buck3 { > + /* Regulator is left as is unused */ > + }; > + > + ldo1_reg: ldo1 { > + regulator-name = "VDDSHV5_SDIO"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-allow-bypass; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2_reg: ldo2 { > + regulator-name = "VDD_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3_reg: ldo3 { > + regulator-name = "VDDA_PHY_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4_reg: ldo4 { > + regulator-name = "VDDA_PLL_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&sdhci1 { > + /* SD/MMC */ > + vmmc-supply = <&vdd_mmc1>; > + vqmmc-supply = <&vdd_sd_dv>; > + pinctrl-names = "default"; > + pinctrl-0 = <&main_mmc1_pins_default>; > + ti,driver-strength-ohm = <50>; > + disable-wp; > + status = "okay"; > + bootph-all; https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node Also add: cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; cd-debounce-delay-ms = <100>; ti,fails-without-test-cd; With this, you will actually have runtime PM working properly for SD card while booting off some other interface (e.g. nvme or others) and card detect will work since GPIO based wake sequence will still be valid. > +}; > -- > 2.39.2 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-04-25 16:28 [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson 2024-04-25 16:28 ` [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai Robert Nelson @ 2024-04-25 16:30 ` Robert Nelson 2024-04-26 12:22 ` Krzysztof Kozlowski 2 siblings, 0 replies; 5+ messages in thread From: Robert Nelson @ 2024-04-25 16:30 UTC (permalink / raw) To: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, linux kernel, devicetree Cc: Rob Herring, Andrew Davis, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri, Drew Fustini On Thu, Apr 25, 2024 at 11:28 AM Robert Nelson <robertcnelson@gmail.com> wrote: > > This board is based on ti,j722s family using the am67a variation. > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Rob Herring <robh@kernel.org> > CC: Andrew Davis <afd@ti.com> > CC: Nishanth Menon <nm@ti.com> > CC: Jared McArthur <j-mcarthur@ti.com> > CC: Jason Kridner <jkridner@beagleboard.org> > CC: Deepak Khatri <lorforlinux@beagleboard.org> > CC: Drew Fustini <drew@beagleboard.org> > --- > Changes since v1: > - switched to the TI model am67a over the family name j722s > --- > Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml > index 52b51fd7044e..201378cdbd93 100644 > --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml > +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml > @@ -134,6 +134,7 @@ properties: > - description: K3 J722S SoC and Boards > items: > - enum: > + - beagle,am67a-beagley-ai > - ti,j722s-evm > - const: ti,j722s > > -- > 2.39.2 > Rob, after discussions with TI, we changed the name of this board from beagle,j722s-beagley-ai to beagle,am67a-beagley-ai so i didn't apply your original ack from v1... Regards -- Robert Nelson https://rcn-ee.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI 2024-04-25 16:28 [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson 2024-04-25 16:28 ` [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai Robert Nelson 2024-04-25 16:30 ` [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson @ 2024-04-26 12:22 ` Krzysztof Kozlowski 2 siblings, 0 replies; 5+ messages in thread From: Krzysztof Kozlowski @ 2024-04-26 12:22 UTC (permalink / raw) To: Robert Nelson, linux-arm-kernel, linux-kernel, devicetree Cc: Rob Herring, Andrew Davis, Nishanth Menon, Jared McArthur, Jason Kridner, Deepak Khatri, Drew Fustini On 25/04/2024 18:28, Robert Nelson wrote: > This board is based on ti,j722s family using the am67a variation. > > https://beagley-ai.org/ > https://openbeagle.org/beagley-ai/beagley-ai > Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline), work on fork of kernel (don't, instead use mainline) or you ignore some maintainers (really don't). Just use b4 and everything should be fine, although remember about `b4 prep --auto-to-cc` if you added new patches to the patchset. You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time, thus I will skip this patch entirely till you follow the process allowing the patch to be tested. Please kindly resend and include all necessary To/Cc entries. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-04-26 13:23 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-04-25 16:28 [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson 2024-04-25 16:28 ` [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai Robert Nelson 2024-04-26 13:22 ` Nishanth Menon 2024-04-25 16:30 ` [PATCH v2 1/2] dt-bindings: arm: ti: Add BeagleY-AI Robert Nelson 2024-04-26 12:22 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).