[PATCH 3/8] iio: adc: fsl-imx25-gcq: use 'time_left' variable with wait_for_completion_interruptible_timeout()

[Wolfram Sang <wsa+renesas@sang-engineering.com>]

There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:

	timeout = wait_for_completion_interruptible_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/iio/adc/fsl-imx25-gcq.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 68c813de0605..dabc5303d644 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -107,7 +107,7 @@ static int mx25_gcq_get_raw_value(struct device *dev,
 				  struct mx25_gcq_priv *priv,
 				  int *val)
 {
-	long timeout;
+	long time_left;
 	u32 data;
 
 	/* Setup the configuration we want to use */
@@ -120,12 +120,12 @@ static int mx25_gcq_get_raw_value(struct device *dev,
 	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
 			   MX25_ADCQ_CR_FQS);
 
-	timeout = wait_for_completion_interruptible_timeout(
+	time_left = wait_for_completion_interruptible_timeout(
 		&priv->completed, MX25_GCQ_TIMEOUT);
-	if (timeout < 0) {
+	if (time_left < 0) {
 		dev_err(dev, "ADC wait for measurement failed\n");
-		return timeout;
-	} else if (timeout == 0) {
+		return time_left;
+	} else if (time_left == 0) {
 		dev_err(dev, "ADC timed out\n");
 		return -ETIMEDOUT;
 	}
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel