public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: neil.armstrong@linaro.org, jbrunet@baylibre.com,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, khilman@baylibre.com,
	martin.blumenstingl@googlemail.com, jian.hu@amlogic.com,
	kernel@sberdevices.ru, rockosov@gmail.com,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/7] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings
Date: Sat, 11 May 2024 14:08:03 +0100	[thread overview]
Message-ID: <20240511-secret-barcode-e25c722ddf1d@spud> (raw)
In-Reply-To: <20240510090933.19464-3-ddrokosov@salutedevices.com>


[-- Attachment #1.1: Type: text/plain, Size: 2906 bytes --]

On Fri, May 10, 2024 at 12:08:54PM +0300, Dmitry Rokosov wrote:
> The 'syspll' PLL is a general-purpose PLL designed specifically for the
> CPU clock. It is capable of producing output frequencies within the
> range of 768MHz to 1536MHz.
> 
> The clock source sys_pll_div16, being one of the GEN clock parents,
> plays a crucial role and cannot be tagged as "optional". Unfortunately,
> it was not implemented earlier due to the cpu clock ctrl driver's
> pending status on the TODO list.

It's fine to not mark it optional in the binding, but it should be
optional in the driver as otherwise backwards compatibility will be
broken. Given this is an integral clock driver, sounds like it would
quite likely break booting on these devices if the driver doesn't treat
syspll_in as optional.
A lesson perhaps in describing the hardware entirely, even if the
drivers don't make use of all the information yet?

Cheers,
Conor.

> 
> Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
> ---
>  .../devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml     | 7 +++++--
>  include/dt-bindings/clock/amlogic,a1-pll-clkc.h            | 2 ++
>  2 files changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> index a59b188a8bf5..fbba57031278 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
> @@ -26,11 +26,13 @@ properties:
>      items:
>        - description: input fixpll_in
>        - description: input hifipll_in
> +      - description: input syspll_in
>  
>    clock-names:
>      items:
>        - const: fixpll_in
>        - const: hifipll_in
> +      - const: syspll_in
>  
>  required:
>    - compatible
> @@ -53,7 +55,8 @@ examples:
>              reg = <0 0x7c80 0 0x18c>;
>              #clock-cells = <1>;
>              clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
> -                     <&clkc_periphs CLKID_HIFIPLL_IN>;
> -            clock-names = "fixpll_in", "hifipll_in";
> +                     <&clkc_periphs CLKID_HIFIPLL_IN>,
> +                     <&clkc_periphs CLKID_SYSPLL_IN>;
> +            clock-names = "fixpll_in", "hifipll_in", "syspll_in";
>          };
>      };
> diff --git a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> index 2b660c0f2c9f..a702d610589c 100644
> --- a/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> +++ b/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
> @@ -21,5 +21,7 @@
>  #define CLKID_FCLK_DIV5		8
>  #define CLKID_FCLK_DIV7		9
>  #define CLKID_HIFI_PLL		10
> +#define CLKID_SYS_PLL		11
> +#define CLKID_SYS_PLL_DIV16	12
>  
>  #endif /* __A1_PLL_CLKC_H */
> -- 
> 2.43.0
> 
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-05-11 13:08 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-10  9:08 [PATCH v2 0/7] clk: meson: introduce Amlogic A1 SoC Family CPU clock controller driver Dmitry Rokosov
2024-05-10  9:08 ` [PATCH v2 1/7] clk: meson: introduce 'INIT_ONCE' flag to eliminate init for enabled PLL Dmitry Rokosov
2024-05-13 12:44   ` Jerome Brunet
2024-05-13 21:47     ` Dmitry Rokosov
2024-05-15 13:12       ` Jerome Brunet
2024-05-10  9:08 ` [PATCH v2 2/7] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings Dmitry Rokosov
2024-05-11 13:08   ` Conor Dooley [this message]
2024-05-13  9:18     ` Dmitry Rokosov
2024-05-13 15:48       ` Conor Dooley
2024-05-13 18:30         ` Dmitry Rokosov
2024-05-15 13:15           ` Jerome Brunet
2024-05-13 12:04     ` Jerome Brunet
2024-05-13 15:42       ` Conor Dooley
2024-05-10  9:08 ` [PATCH v2 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock Dmitry Rokosov
2024-05-13 12:48   ` Jerome Brunet
2024-05-13 21:25     ` Dmitry Rokosov
2024-05-10  9:08 ` [PATCH v2 4/7] dt-bindings: clock: meson: a1: peripherals: support sys_pll_div16 input Dmitry Rokosov
2024-05-11 13:03   ` Conor Dooley
2024-05-13 12:02     ` Jerome Brunet
2024-05-10  9:08 ` [PATCH v2 5/7] clk: meson: a1: peripherals: support 'sys_pll_div16' clock as GEN input Dmitry Rokosov
2024-05-10  9:08 ` [PATCH v2 6/7] dt-bindings: clock: meson: add A1 CPU clock controller bindings Dmitry Rokosov
2024-05-10  9:08 ` [PATCH v2 7/7] clk: meson: a1: add Amlogic A1 CPU clock controller driver Dmitry Rokosov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240511-secret-barcode-e25c722ddf1d@spud \
    --to=conor@kernel.org \
    --cc=ddrokosov@salutedevices.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=jian.hu@amlogic.com \
    --cc=kernel@sberdevices.ru \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=rockosov@gmail.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox