public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Farouk Bouabid <farouk.bouabid@cherry.de>
To: "Uwe Kleine-König" <ukleinek@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Quentin Schulz" <quentin.schulz@cherry.de>,
	"Heiko Stuebner" <heiko@sntech.de>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-rockchip@lists.infradead.org,
	 Farouk Bouabid <farouk.bouabid@cherry.de>
Subject: [PATCH 0/6] Add Mule PWM-over-I2C support
Date: Wed, 29 May 2024 12:10:29 +0200	[thread overview]
Message-ID: <20240529-buzzer_support-v1-0-fd3eb0a24442@cherry.de> (raw)

Mule is an MCU that emulates a set of I2C devices which are reachable
through an I2C-mux that is implemented in a different patch-series[1].

Device #1 on the mux is a PWM controller that allows users to I2C-configure
the PWM output signal.

On rk3399-puma-haikou, px30-ringneck-haikou, rk3588-tiger-haikou and
rk3588-jaguar boards, this PWM controller is connected to a PWM beeper.

      +-----------------------------------------------+
      |  Mule                                         |
      |        +---------------+                      |
    ----+----->|Config register|                      |
      | |      +--------|------+                      |
      | |               |                             |
      | |               V                             |
      | |               __           +--------------+ |
      | |              |   \-------->| amc6821      | |
      | |              |   |         +--------------+ |      +--------+
      | |              | M |-------->| PWM over I2C |------->| Beeper |
      | +------------->| U |         +--------------+ |      +--------+
      |                | X |-------->| dev #2       | |
      |                |   |         +--------------+ |
      |                |   /-------->| dev #3       | |
      |                |__/          +--------------+ |
      +-----------------------------------------------+

This patch-series add support for Mule PWM-over-I2C controller as well
as the PWM-beeper on theses boards.

The device-tree patches are to be merged after the other patch-series.
The dt-bindings and driver patches can be merged regardless of the state
of the other series.

[1] https://lore.kernel.org/lkml/20240506-dev-mule-i2c-mux-v2-0-a91c954f65d7@cherry.de/

Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
---
Farouk Bouabid (6):
      dt-bindings: pwm: add dt-bindings for mule pwm-over-i2c controller
      pwm: add mule pwm-over-i2c driver
      arm64: dts: rockchip: add pwm-beeper to rk3399-puma-haikou
      arm64: dts: rockchip: add pwm-beeper to px30-ringneck-haikou
      arm64: dts: rockchip: add pwm-beeper to rk3588-tiger-haikou
      arm64: dts: rockchip: add pwm-beeper to rk3588-jaguar

 .../devicetree/bindings/pwm/tsd,pwm-mule.yaml      |  46 +++++++++
 .../boot/dts/rockchip/px30-ringneck-haikou.dts     |   5 +
 arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi    |  13 +++
 .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts |   5 +
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi      |  13 +++
 arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts     |  18 ++++
 .../boot/dts/rockchip/rk3588-tiger-haikou.dts      |   6 ++
 arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi     |  13 +++
 drivers/pwm/Kconfig                                |  10 ++
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-mule.c                             | 115 +++++++++++++++++++++
 11 files changed, 245 insertions(+)
---
base-commit: fd8c3f3cd1b029f1851393839f7ce558db9cf202
change-id: 20240515-buzzer_support-33d93c9d0f1b

Best regards,
-- 
Farouk Bouabid <farouk.bouabid@cherry.de>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2024-05-29 10:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-29 10:10 Farouk Bouabid [this message]
2024-05-29 10:10 ` [PATCH 1/6] dt-bindings: pwm: add dt-bindings for mule pwm-over-i2c controller Farouk Bouabid
2024-05-29 20:29   ` Conor Dooley
2024-05-31 16:19     ` Farouk Bouabid
2024-05-29 10:10 ` [PATCH 2/6] pwm: add mule pwm-over-i2c driver Farouk Bouabid
2024-07-12  8:54   ` Uwe Kleine-König
2024-07-15 12:16     ` Quentin Schulz
2024-07-15 15:09       ` Uwe Kleine-König
2024-07-17  8:48         ` Quentin Schulz
2024-07-18 11:50           ` Uwe Kleine-König
2024-05-29 10:10 ` [PATCH 3/6] arm64: dts: rockchip: add pwm-beeper to rk3399-puma-haikou Farouk Bouabid
2024-05-29 10:10 ` [PATCH 4/6] arm64: dts: rockchip: add pwm-beeper to px30-ringneck-haikou Farouk Bouabid
2024-05-29 10:10 ` [PATCH 5/6] arm64: dts: rockchip: add pwm-beeper to rk3588-tiger-haikou Farouk Bouabid
2024-05-29 10:10 ` [PATCH 6/6] arm64: dts: rockchip: add pwm-beeper to rk3588-jaguar Farouk Bouabid

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240529-buzzer_support-v1-0-fd3eb0a24442@cherry.de \
    --to=farouk.bouabid@cherry.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=quentin.schulz@cherry.de \
    --cc=robh@kernel.org \
    --cc=ukleinek@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox