linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ryan Walklin <ryan@testtoast.com>
To: Yangtao Li <tiny.windzz@gmail.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Viresh Kumar <vireshk@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Andre Przywara <andre.przywara@arm.com>
Cc: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,
	Chris Morgan <macroalpha82@gmail.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Nishanth Menon <nm@ti.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Ryan Walklin <ryan@testtoast.com>
Subject: [PATCH 2/3] arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
Date: Fri,  7 Jun 2024 21:20:34 +1200	[thread overview]
Message-ID: <20240607092140.33112-3-ryan@testtoast.com> (raw)
In-Reply-To: <20240607092140.33112-1-ryan@testtoast.com>

The H700 now shows stable operation with the 1.008, 1.032 and 1.512 GHz
DVFS operating points. The 1.5GHz OPP requires a VDD-CPU of 1.16V,
obtained from the vendor BSP. This voltage is slightly above the
recommended operating voltage for the H616 (H700 datasheet not publicly
available) but well within the absolute maximum of 1.3V.

Add the additional 1.032 GHz operating point to the H616 CPU-OPP table,
and enable the 1.008 and 1.512 points for the H700.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
 .../dts/allwinner/sun50i-h616-cpu-opp.dtsi    | 25 +++++++++++++------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
index aca22a7f0191c..dd10aaf472b66 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
@@ -11,7 +11,7 @@ opp-480000000 {
 			opp-hz = /bits/ 64 <480000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x1f>;
+			opp-supported-hw = <0x3f>;
 		};
 
 		opp-600000000 {
@@ -25,7 +25,7 @@ opp-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0d>;
+			opp-supported-hw = <0x2d>;
 		};
 
 		opp-792000000 {
@@ -50,8 +50,16 @@ opp-1008000000 {
 			opp-microvolt-speed2 = <950000>;
 			opp-microvolt-speed3 = <950000>;
 			opp-microvolt-speed4 = <1020000>;
+			opp-microvolt-speed5 = <900000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x1f>;
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-1032000000 {
+			opp-hz = /bits/ 64 <1032000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x20>;
 		};
 
 		opp-1104000000 {
@@ -59,8 +67,9 @@ opp-1104000000 {
 			opp-microvolt-speed0 = <1000000>;
 			opp-microvolt-speed2 = <1000000>;
 			opp-microvolt-speed3 = <1000000>;
+			opp-microvolt-speed5 = <950000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0d>;
+			opp-supported-hw = <0x2d>;
 		};
 
 		opp-1200000000 {
@@ -70,8 +79,9 @@ opp-1200000000 {
 			opp-microvolt-speed2 = <1050000>;
 			opp-microvolt-speed3 = <1050000>;
 			opp-microvolt-speed4 = <1100000>;
+			opp-microvolt-speed5 = <1020000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x1f>;
+			opp-supported-hw = <0x3f>;
 		};
 
 		opp-1320000000 {
@@ -85,15 +95,16 @@ opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0d>;
+			opp-supported-hw = <0x2d>;
 		};
 
 		opp-1512000000 {
 			opp-hz = /bits/ 64 <1512000000>;
 			opp-microvolt-speed1 = <1100000>;
 			opp-microvolt-speed3 = <1100000>;
+			opp-microvolt-speed5 = <1160000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0a>;
+			opp-supported-hw = <0x2a>;
 		};
 	};
 };
-- 
2.45.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-06-07  9:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-07  9:20 [PATCH 0/3] cpufreq: sun50i: add Allwinner H700 speed bin and additional OPPs Ryan Walklin
2024-06-07  9:20 ` [PATCH 1/3] cpufreq: sun50i: add Allwinner H700 speed bin Ryan Walklin
2024-06-19  0:00   ` Andre Przywara
2024-06-19  3:16     ` Viresh Kumar
2024-06-07  9:20 ` Ryan Walklin [this message]
2024-06-19  0:00   ` [PATCH 2/3] arm64: dts: allwinner: h616: add additional CPU OPPs for the H700 Andre Przywara
2024-06-07  9:20 ` [PATCH 3/3] arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling Ryan Walklin
2024-06-19  0:00   ` Andre Przywara
2024-06-22 15:17 ` (subset) [PATCH 0/3] cpufreq: sun50i: add Allwinner H700 speed bin and additional OPPs Chen-Yu Tsai
2024-06-25 15:21   ` Philippe Simons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240607092140.33112-3-ryan@testtoast.com \
    --to=ryan@testtoast.com \
    --cc=andre.przywara@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=macroalpha82@gmail.com \
    --cc=nm@ti.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=tiny.windzz@gmail.com \
    --cc=vireshk@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).