From: Linus Torvalds <torvalds@linux-foundation.org>
To: Peter Anvin <hpa@zytor.com>, Ingo Molnar <mingo@kernel.org>,
Borislav Petkov <bp@alien8.de>,
Thomas Gleixner <tglx@linutronix.de>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Josh Poimboeuf <jpoimboe@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
the arch/x86 maintainers <x86@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-arch <linux-arch@vger.kernel.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: [PATCH 5/7] arm64: start using 'asm goto' for get_user() when available
Date: Mon, 10 Jun 2024 13:48:19 -0700 [thread overview]
Message-ID: <20240610204821.230388-6-torvalds@linux-foundation.org> (raw)
In-Reply-To: <20240610204821.230388-1-torvalds@linux-foundation.org>
This generates noticeably better code with compilers that support it,
since we don't need to test the error register etc, the exception just
jumps to the error handling directly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
arch/arm64/include/asm/uaccess.h | 113 ++++++++++++++++++++++++-------
arch/arm64/kernel/mte.c | 12 ++--
2 files changed, 95 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 14be5000c5a0..23c2edf517ed 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -184,29 +184,40 @@ static inline void __user *__uaccess_mask_ptr(const void __user *ptr)
* The "__xxx_error" versions set the third argument to -EFAULT if an error
* occurs, and leave it unchanged on success.
*/
-#define __get_mem_asm(load, reg, x, addr, err, type) \
+#ifdef CONFIG_CC_HAS_ASM_GOTO_OUTPUT
+#define __get_mem_asm(load, reg, x, addr, label, type) \
+ asm_goto_output( \
+ "1: " load " " reg "0, [%1]\n" \
+ _ASM_EXTABLE_##type##ACCESS_ERR(1b, %l2, %w0) \
+ : "=r" (x) \
+ : "r" (addr) : : label)
+#else
+#define __get_mem_asm(load, reg, x, addr, label, type) do { \
+ int __gma_err = 0; \
asm volatile( \
"1: " load " " reg "1, [%2]\n" \
"2:\n" \
_ASM_EXTABLE_##type##ACCESS_ERR_ZERO(1b, 2b, %w0, %w1) \
- : "+r" (err), "=r" (x) \
- : "r" (addr))
+ : "+r" (__gma_err), "=r" (x) \
+ : "r" (addr)); \
+ if (__gma_err) goto label; } while (0)
+#endif
-#define __raw_get_mem(ldr, x, ptr, err, type) \
+#define __raw_get_mem(ldr, x, ptr, label, type) \
do { \
unsigned long __gu_val; \
switch (sizeof(*(ptr))) { \
case 1: \
- __get_mem_asm(ldr "b", "%w", __gu_val, (ptr), (err), type); \
+ __get_mem_asm(ldr "b", "%w", __gu_val, (ptr), label, type); \
break; \
case 2: \
- __get_mem_asm(ldr "h", "%w", __gu_val, (ptr), (err), type); \
+ __get_mem_asm(ldr "h", "%w", __gu_val, (ptr), label, type); \
break; \
case 4: \
- __get_mem_asm(ldr, "%w", __gu_val, (ptr), (err), type); \
+ __get_mem_asm(ldr, "%w", __gu_val, (ptr), label, type); \
break; \
case 8: \
- __get_mem_asm(ldr, "%x", __gu_val, (ptr), (err), type); \
+ __get_mem_asm(ldr, "%x", __gu_val, (ptr), label, type); \
break; \
default: \
BUILD_BUG(); \
@@ -219,27 +230,34 @@ do { \
* uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
* we must evaluate these outside of the critical section.
*/
-#define __raw_get_user(x, ptr, err) \
+#define __raw_get_user(x, ptr, label) \
do { \
__typeof__(*(ptr)) __user *__rgu_ptr = (ptr); \
__typeof__(x) __rgu_val; \
__chk_user_ptr(ptr); \
- \
- uaccess_ttbr0_enable(); \
- __raw_get_mem("ldtr", __rgu_val, __rgu_ptr, err, U); \
- uaccess_ttbr0_disable(); \
- \
- (x) = __rgu_val; \
+ do { \
+ __label__ __rgu_failed; \
+ uaccess_ttbr0_enable(); \
+ __raw_get_mem("ldtr", __rgu_val, __rgu_ptr, __rgu_failed, U); \
+ uaccess_ttbr0_disable(); \
+ (x) = __rgu_val; \
+ break; \
+ __rgu_failed: \
+ uaccess_ttbr0_disable(); \
+ goto label; \
+ } while (0); \
} while (0)
#define __get_user_error(x, ptr, err) \
do { \
+ __label__ __gu_failed; \
__typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
if (access_ok(__p, sizeof(*__p))) { \
__p = uaccess_mask_ptr(__p); \
- __raw_get_user((x), __p, (err)); \
+ __raw_get_user((x), __p, __gu_failed); \
} else { \
+ __gu_failed: \
(x) = (__force __typeof__(x))0; (err) = -EFAULT; \
} \
} while (0)
@@ -262,15 +280,18 @@ do { \
do { \
__typeof__(dst) __gkn_dst = (dst); \
__typeof__(src) __gkn_src = (src); \
- int __gkn_err = 0; \
+ do { \
+ __label__ __gkn_label; \
\
- __mte_enable_tco_async(); \
- __raw_get_mem("ldr", *((type *)(__gkn_dst)), \
- (__force type *)(__gkn_src), __gkn_err, K); \
- __mte_disable_tco_async(); \
- \
- if (unlikely(__gkn_err)) \
+ __mte_enable_tco_async(); \
+ __raw_get_mem("ldr", *((type *)(__gkn_dst)), \
+ (__force type *)(__gkn_src), __gkn_label, K); \
+ __mte_disable_tco_async(); \
+ break; \
+ __gkn_label: \
+ __mte_disable_tco_async(); \
goto err_label; \
+ } while (0); \
} while (0)
#define __put_mem_asm(store, reg, x, addr, err, type) \
@@ -381,6 +402,52 @@ extern unsigned long __must_check __arch_copy_to_user(void __user *to, const voi
__actu_ret; \
})
+static __must_check __always_inline bool user_access_begin(const void __user *ptr, size_t len)
+{
+ if (unlikely(!access_ok(ptr,len)))
+ return 0;
+ uaccess_ttbr0_enable();
+ return 1;
+}
+#define user_access_begin(a,b) user_access_begin(a,b)
+#define user_access_end() uaccess_ttbr0_disable()
+
+/*
+ * The arm64 inline asms should learn abut asm goto, and we should
+ * teach user_access_begin() about address masking.
+ */
+#define unsafe_put_user(x, ptr, label) do { \
+ int __upu_err = 0; \
+ __raw_put_mem("sttr", x, uaccess_mask_ptr(ptr), __upu_err, U); \
+ if (__upu_err) goto label; \
+} while (0)
+
+#define unsafe_get_user(x, ptr, label) \
+ __raw_get_mem("ldtr", x, uaccess_mask_ptr(ptr), label, U)
+
+/*
+ * We want the unsafe accessors to always be inlined and use
+ * the error labels - thus the macro games.
+ */
+#define unsafe_copy_loop(dst, src, len, type, label) \
+ while (len >= sizeof(type)) { \
+ unsafe_put_user(*(type *)(src),(type __user *)(dst),label); \
+ dst += sizeof(type); \
+ src += sizeof(type); \
+ len -= sizeof(type); \
+ }
+
+#define unsafe_copy_to_user(_dst,_src,_len,label) \
+do { \
+ char __user *__ucu_dst = (_dst); \
+ const char *__ucu_src = (_src); \
+ size_t __ucu_len = (_len); \
+ unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u64, label); \
+ unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u32, label); \
+ unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u16, label); \
+ unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u8, label); \
+} while (0)
+
#define INLINE_COPY_TO_USER
#define INLINE_COPY_FROM_USER
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index dcdcccd40891..6174671be7c1 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -582,12 +582,9 @@ subsys_initcall(register_mte_tcf_preferred_sysctl);
size_t mte_probe_user_range(const char __user *uaddr, size_t size)
{
const char __user *end = uaddr + size;
- int err = 0;
char val;
- __raw_get_user(val, uaddr, err);
- if (err)
- return size;
+ __raw_get_user(val, uaddr, efault);
uaddr = PTR_ALIGN(uaddr, MTE_GRANULE_SIZE);
while (uaddr < end) {
@@ -595,12 +592,13 @@ size_t mte_probe_user_range(const char __user *uaddr, size_t size)
* A read is sufficient for mte, the caller should have probed
* for the pte write permission if required.
*/
- __raw_get_user(val, uaddr, err);
- if (err)
- return end - uaddr;
+ __raw_get_user(val, uaddr, efault);
uaddr += MTE_GRANULE_SIZE;
}
(void)val;
return 0;
+
+efault:
+ return end - uaddr;
}
--
2.45.1.209.gc6f12300df
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-06-10 20:49 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 20:48 [PATCH 0/7] arm64 / x86-64: low-level code generation issues Linus Torvalds
2024-06-10 20:48 ` [PATCH 1/7] vfs: dcache: move hashlen_hash() from callers into d_hash() Linus Torvalds
2024-06-10 20:48 ` [PATCH 2/7] add default dummy 'runtime constant' infrastructure Linus Torvalds
2024-06-12 10:04 ` Borislav Petkov
2024-06-10 20:48 ` [PATCH 3/7] x86: add 'runtime constant' support Linus Torvalds
2024-06-10 20:48 ` [PATCH 4/7] arm64: " Linus Torvalds
2024-06-11 14:29 ` Mark Rutland
2024-06-11 16:56 ` Linus Torvalds
2024-06-11 17:20 ` [PATCH 4/7 v2] " Linus Torvalds
2024-06-12 18:42 ` Mark Rutland
2024-06-11 17:48 ` [PATCH 4/7] " Mark Rutland
2024-06-11 17:59 ` Linus Torvalds
2024-06-11 18:59 ` Linus Torvalds
2024-06-11 20:22 ` Mark Rutland
2024-06-11 21:08 ` Linus Torvalds
2024-06-10 20:48 ` Linus Torvalds [this message]
2024-06-10 20:48 ` [PATCH 6/7] arm64: start using 'asm goto' for put_user() when available Linus Torvalds
2024-06-11 21:55 ` Nathan Chancellor
2024-06-11 23:29 ` Linus Torvalds
2024-06-11 23:40 ` [PATCH 6/7 v2] " Linus Torvalds
2024-06-10 20:48 ` [PATCH 7/7] arm64: access_ok() optimization Linus Torvalds
2024-06-10 21:08 ` [PATCH 0/7] arm64 / x86-64: low-level code generation issues Linus Torvalds
2024-06-11 17:24 ` David Woodhouse
2024-06-11 17:40 ` Linus Torvalds
2024-06-11 17:52 ` Linus Torvalds
2024-06-12 18:41 ` Mark Rutland
2024-06-12 20:02 ` Linus Torvalds
2024-06-12 22:25 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240610204821.230388-6-torvalds@linux-foundation.org \
--to=torvalds@linux-foundation.org \
--cc=bp@alien8.de \
--cc=catalin.marinas@arm.com \
--cc=hpa@zytor.com \
--cc=jpoimboe@kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox