* [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600)
@ 2024-06-13 15:24 Peter Yin
2024-06-13 15:24 ` [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip Peter Yin
` (6 more replies)
0 siblings, 7 replies; 12+ messages in thread
From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw)
To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel,
linux-aspeed, linux-kernel
Summary:
Revise linux device tree entry related to Meta(Facebook) Harma
specific devices connected to BMC(AST2600) SoC.
Base on: https://lore.kernel.org/all/CAPSyxFRj0twCJG6Lr5UZpznrUHyd_L0Reo=kZSFwCw3FNQ+x+A@mail.gmail.com/
Change log:
v1
- Patch 0001 - revise hsc chip
- Patch 0002 - add VR device
- Patch 0003 - add sgpio name
- Patch 0004 - add ina238
- Patch 0005 - add power monitor xdp710
- Patch 0006 - remove multi-host property
- Patch 0007 - remove pca9546
Peter Yin (7):
ARM: dts: aspeed: Harma: revise hsc chip
ARM: dts: aspeed: Harma: add VR device
ARM: dts: aspeed: Harma: add sgpio name
ARM: dts: aspeed: Harma: add ina238
ARM: dts: aspeed: Harma: add power monitor xdp710
ARM: dts: aspeed: Harma: remove multi-host property
ARM: dts: aspeed: Harma: remove pca9546
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 148 +++++++++++++-----
1 file changed, 109 insertions(+), 39 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-13 15:24 ` [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device Peter Yin ` (5 subsequent siblings) 6 siblings, 0 replies; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Revise HSC chip name and address to match LTC4287. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index e7f4823ca4b3..0d349ce1f3e6 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -276,11 +276,10 @@ temperature-sensor@49 { reg = <0x49>; }; - power-monitor@22 { - compatible = "lltc,ltc4286"; - reg = <0x22>; - adi,vrange-low-enable; - shunt-resistor-micro-ohms = <500>; + power-monitor@44 { + compatible = "lltc,ltc4287"; + reg = <0x44>; + shunt-resistor-micro-ohms = <250>; }; }; -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin 2024-06-13 15:24 ` [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-16 20:04 ` kernel test robot 2024-06-13 15:24 ` [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name Peter Yin ` (4 subsequent siblings) 6 siblings, 1 reply; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Add isl69260, xdpe152c4 device Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index 0d349ce1f3e6..ef5ffe190445 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -398,6 +398,30 @@ imux28: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + power-monitor@61 { + compatible = "isil,isl69260"; + reg = <0x61>; + }; + power-monitor@62 { + compatible = "isil,isl69260"; + reg = <0x62>; + }; + power-monitor@63 { + compatible = "isil,isl69260"; + reg = <0x61>; + }; + power-monitor@64 { + compatible = "infineon,xdpe152c4"; + reg = <0x64>; + }; + power-monitor@66 { + compatible = "infineon,xdpe152c4"; + reg = <0x66>; + }; + power-monitor@68 { + compatible = "infineon,xdpe152c4"; + reg = <0x68>; + }; }; imux29: i2c@1 { #address-cells = <1>; -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device 2024-06-13 15:24 ` [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device Peter Yin @ 2024-06-16 20:04 ` kernel test robot 0 siblings, 0 replies; 12+ messages in thread From: kernel test robot @ 2024-06-16 20:04 UTC (permalink / raw) To: Peter Yin, patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Cc: oe-kbuild-all Hi Peter, kernel test robot noticed the following build warnings: [auto build test WARNING on robh/for-next] [also build test WARNING on linus/master v6.10-rc3 next-20240613] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/20240613152425.1582059-3-peteryin.openbmc%40gmail.com patch subject: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/config) compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0 dtschema version: 2024.6.dev1+g833054f reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202406170350.zQo7bJdX-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) >> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts:409.21-412.6: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: I2C bus unit address format error, expected "61" arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:655.36-659.7: Warning (unique_unit_address_if_enabled): /ahb/apb/lpc@1e789000/reset-controller@98: duplicate unit-address (also used in node /ahb/apb/lpc@1e789000/uart-routing@98) arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /: spi-gpio: {'status': ['okay'], 'compatible': ['spi-gpio'], '#address-cells': [[1]], '#size-cells': [[0]], 'gpio-sck': [[58, 203, 0]], 'gpio-mosi': [[58, 204, 0]], 'gpio-miso': [[58, 205, 0]], 'num-chipselects': [[1]], 'cs-gpios': [[58, 200, 1]], 'tpmdev@0': {'compatible': ['infineon,slb9670', 'tcg,tpm_tis-spi'], 'spi-max-frequency': [[33000000]], 'reg': [[0]]}} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# -- from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78d000: pinctrl-0: True is not of type 'array' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78f000: pinctrl-0: True is not of type 'array' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@80/pwm@5e: failed to match any schema with compatible: ['max31790'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@180/pwm@5e: failed to match any schema with compatible: ['max31790'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/power-monitor@69: failed to match any schema with compatible: ['pmbus'] >> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@61: failed to match any schema with compatible: ['isil,isl69260'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@62: failed to match any schema with compatible: ['isil,isl69260'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: failed to match any schema with compatible: ['isil,isl69260'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/ipmb@10: failed to match any schema with compatible: ['ipmb-dev'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: spi-gpio: $nodename:0: 'spi-gpio' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml# vim +/61 +409 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts 387 388 &i2c13 { 389 status = "okay"; 390 391 i2c-mux@70 { 392 compatible = "nxp,pca9545"; 393 reg = <0x70>; 394 #address-cells = <1>; 395 #size-cells = <0>; 396 397 imux28: i2c@0 { 398 #address-cells = <1>; 399 #size-cells = <0>; 400 reg = <0>; 401 power-monitor@61 { 402 compatible = "isil,isl69260"; 403 reg = <0x61>; 404 }; 405 power-monitor@62 { 406 compatible = "isil,isl69260"; 407 reg = <0x62>; 408 }; > 409 power-monitor@63 { 410 compatible = "isil,isl69260"; 411 reg = <0x61>; 412 }; 413 power-monitor@64 { 414 compatible = "infineon,xdpe152c4"; 415 reg = <0x64>; 416 }; 417 power-monitor@66 { 418 compatible = "infineon,xdpe152c4"; 419 reg = <0x66>; 420 }; 421 power-monitor@68 { 422 compatible = "infineon,xdpe152c4"; 423 reg = <0x68>; 424 }; 425 }; 426 imux29: i2c@1 { 427 #address-cells = <1>; 428 #size-cells = <0>; 429 reg = <1>; 430 //MB FRU 431 eeprom@54 { 432 compatible = "atmel,24c64"; 433 reg = <0x54>; 434 }; 435 }; 436 imux30: i2c@2 { 437 #address-cells = <1>; 438 #size-cells = <0>; 439 reg = <2>; 440 }; 441 imux31: i2c@3 { 442 #address-cells = <1>; 443 #size-cells = <0>; 444 reg = <3>; 445 }; 446 }; 447 }; 448 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin 2024-06-13 15:24 ` [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip Peter Yin 2024-06-13 15:24 ` [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-13 15:24 ` [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238 Peter Yin ` (3 subsequent siblings) 6 siblings, 0 replies; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Add power-chassis-control and power-chassis-power for phosphor-power Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index ef5ffe190445..06c8b5ff1125 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -520,13 +520,14 @@ &gpio0 { /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "power-button","power-host-control", "reset-button","","led-power","","","", - /*Q0-Q7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","power-chassis-control","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "","","","","","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","led-identify-gate","", /*V0-V7*/ "","","","", - "rtc-battery-voltage-read-enable","","","", + "rtc-battery-voltage-read-enable","", + "power-chassis-good","", /*W0-W7*/ "","","","","","","","", /*X0-X7*/ "","","","","","","","", /*Y0-Y7*/ "","","","","","","","", -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin ` (2 preceding siblings ...) 2024-06-13 15:24 ` [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-13 15:24 ` [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710 Peter Yin ` (2 subsequent siblings) 6 siblings, 0 replies; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Add INA238 power monitor for Harma fan board. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index 06c8b5ff1125..05020e23a901 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -198,6 +198,30 @@ pwm@5e{ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; }; &i2c1 { @@ -224,6 +248,30 @@ pwm@5e{ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; }; &i2c3 { -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin ` (3 preceding siblings ...) 2024-06-13 15:24 ` [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238 Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-13 15:24 ` [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property Peter Yin 2024-06-13 15:24 ` [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 Peter Yin 6 siblings, 0 replies; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Add HSC xdp710 device in i2c4. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index 05020e23a901..a9caa66a59da 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -329,6 +329,11 @@ power-monitor@44 { reg = <0x44>; shunt-resistor-micro-ohms = <250>; }; + + power-monitor@40 { + compatible = "infineon,xdp710"; + reg = <0x40>; + }; }; &i2c5 { -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin ` (4 preceding siblings ...) 2024-06-13 15:24 ` [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710 Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-17 19:18 ` kernel test robot 2024-06-13 15:24 ` [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 Peter Yin 6 siblings, 1 reply; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Harma is single host, so remove multi-host property Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index a9caa66a59da..d892e646fced 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -137,7 +137,6 @@ &mac3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii4_default>; use-ncsi; - mellanox,multi-host; }; &rtc { -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property 2024-06-13 15:24 ` [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property Peter Yin @ 2024-06-17 19:18 ` kernel test robot 2024-06-17 23:50 ` Andrew Jeffery 0 siblings, 1 reply; 12+ messages in thread From: kernel test robot @ 2024-06-17 19:18 UTC (permalink / raw) To: Peter Yin, patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Cc: oe-kbuild-all Hi Peter, kernel test robot noticed the following build warnings: [auto build test WARNING on robh/for-next] [also build test WARNING on linus/master v6.10-rc4 next-20240613] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/20240613152425.1582059-7-peteryin.openbmc%40gmail.com patch subject: [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240618/202406180305.hrffmKGn-lkp@intel.com/config) compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0 dtschema version: 2024.6.dev1+g833054f reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240618/202406180305.hrffmKGn-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202406180305.hrffmKGn-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e680000: $nodename:0: 'ftgmac@1e680000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e670000: $nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e690000: $nodename:0: 'ftgmac@1e690000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# >> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e690000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: i3c2_default:function:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: i3c2_default:groups:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMCG1', 'EMMCG4', 'EMMCG8', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'HVI3C3', 'HVI3C4', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10G0', 'PWM10G1', 'PWM11G0', 'PWM11G1', 'PWM12G0', 'PWM12G1', 'PWM13G0', 'PWM13G1', 'PWM14G0', 'PWM14G1', 'PWM15G0', 'PWM15G1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8G0', 'PWM8G1', 'PWM9G0', 'PWM9G1', 'QSPI1', 'QSPI2', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10G0', 'SALT10G1', 'SALT11G0', 'SALT11G1', 'SALT12G0', 'SALT12G1', 'SALT13G0', 'SALT13G1', 'SALT14G0', 'SALT14G1', 'SALT15G0', 'SALT15G1', 'SALT16G0', 'SALT16G1', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9G0', 'SALT9G1', 'SD1', 'SD2', 'SD3', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12G0', 'UART12G1', 'UART13G0', 'UART13G1', 'UART6', 'UART7', 'UART8', 'UART9', 'USBA', 'USBB', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: usb11bhid_default:function:0: 'USB11BHID' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: usb2ad_default:function:0: 'USB2AD' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property 2024-06-17 19:18 ` kernel test robot @ 2024-06-17 23:50 ` Andrew Jeffery 0 siblings, 0 replies; 12+ messages in thread From: Andrew Jeffery @ 2024-06-17 23:50 UTC (permalink / raw) To: kernel test robot, Peter Yin, patrick Cc: oe-kbuild-all, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Hi Peter, On Tue, 2024-06-18 at 03:18 +0800, kernel test robot wrote: > Hi Peter, > > kernel test robot noticed the following build warnings: > > [auto build test WARNING on robh/for-next] > [also build test WARNING on linus/master v6.10-rc4 next-20240613] > [If your patch is applied to the wrong git tree, kindly drop us a note. > And when submitting patch, we suggest to use '--base' as documented in > https://git-scm.com/docs/git-format-patch#_base_tree_information] > > url: https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915 > base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next > patch link: https://lore.kernel.org/r/20240613152425.1582059-7-peteryin.openbmc%40gmail.com > patch subject: [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property > config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240618/202406180305.hrffmKGn-lkp@intel.com/config) > compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0 > dtschema version: 2024.6.dev1+g833054f > reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240618/202406180305.hrffmKGn-lkp@intel.com/reproduce) > > If you fix the issue in a separate patch/commit (i.e. not just a new version of > the same patch/commit), kindly add following tags > > Reported-by: kernel test robot <lkp@intel.com> > > Closes: https://lore.kernel.org/oe-kbuild-all/202406180305.hrffmKGn-lkp@intel.com/ > > dtcheck warnings: (new ones prefixed by >>) > *snip* > > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: i3c2_default:function:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] > from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: i3c2_default:groups:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMCG1', 'EMMCG4', 'EMMCG8', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'HVI3C3', 'HVI3C4', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10G0', 'PWM10G1', 'PWM11G0', 'PWM11G1', 'PWM12G0', 'PWM12G1', 'PWM13G0', 'PWM13G1', 'PWM14G0', 'PWM14G1', 'PWM15G0', 'PWM15G1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8G0', 'PWM8G1', 'PWM9G0', 'PWM9G1', 'QSPI1', 'QSPI2', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10G0', 'SALT10G1', 'SALT11G0', 'SALT11G1', 'SALT12G0', 'SALT12G1', 'SALT13G0', 'SALT13G1', 'SALT14G0', 'SALT14G1', 'SALT15G0', 'SALT15G1', 'SALT16G0', 'SALT16G1', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9G0', 'SALT9G1', 'SD1', 'SD2', 'SD3', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12G0', 'UART12G1', 'UART13G0', 'UART13G1', 'UART6', 'UART7', 'UART8', 'UART9', 'USBA', 'USBB', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] > from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: usb11bhid_default:function:0: 'USB11BHID' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] > from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: pinctrl: usb2ad_default:function:0: 'USB2AD' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] > FYI these pinctrl binding issues should be resolved on linux- pinctrl.git devel as of yesterday. The new issue that was picked up (snipped out of the text above) should be addressed though. Andrew ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin ` (5 preceding siblings ...) 2024-06-13 15:24 ` [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property Peter Yin @ 2024-06-13 15:24 ` Peter Yin 2024-06-17 7:41 ` Andrew Jeffery 6 siblings, 1 reply; 12+ messages in thread From: Peter Yin @ 2024-06-13 15:24 UTC (permalink / raw) To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel remove pca9546 and add Aegis fru device Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 56 +++++++++---------- 1 file changed, 25 insertions(+), 31 deletions(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index d892e646fced..4ff9e0104bbe 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -20,10 +20,6 @@ aliases { i2c21 = &imux21; i2c22 = &imux22; i2c23 = &imux23; - i2c24 = &imux24; - i2c25 = &imux25; - i2c26 = &imux26; - i2c27 = &imux27; i2c28 = &imux28; i2c29 = &imux29; i2c30 = &imux30; @@ -391,33 +387,6 @@ gpio@31 { "","","",""; }; - i2c-mux@71 { - compatible = "nxp,pca9546"; - reg = <0x71>; - #address-cells = <1>; - #size-cells = <0>; - - imux24: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - imux25: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - imux26: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - imux27: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; // PTTV FRU eeprom@52 { compatible = "atmel,24c64"; @@ -427,6 +396,31 @@ eeprom@52 { &i2c11 { status = "okay"; + + gpio@30 { + compatible = "nxp,pca9555"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + gpio@31 { + compatible = "nxp,pca9555"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","","", + "","","presence-cmm","", + "","","","", + "","","",""; + }; + + // Aegis FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; }; &i2c12 { -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 2024-06-13 15:24 ` [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 Peter Yin @ 2024-06-17 7:41 ` Andrew Jeffery 0 siblings, 0 replies; 12+ messages in thread From: Andrew Jeffery @ 2024-06-17 7:41 UTC (permalink / raw) To: Peter Yin, patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, devicetree, linux-arm-kernel, linux-aspeed, linux-kernel Hi Peter, On Thu, 2024-06-13 at 23:24 +0800, Peter Yin wrote: > remove pca9546 and add Aegis fru device Is there some relationship between these two things? Can you elaborate? You also add a couple of GPIO expanders that aren't mentioned here? Andrew > > Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> > --- > .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 56 +++++++++---------- > 1 file changed, 25 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts > index d892e646fced..4ff9e0104bbe 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts > @@ -20,10 +20,6 @@ aliases { > i2c21 = &imux21; > i2c22 = &imux22; > i2c23 = &imux23; > - i2c24 = &imux24; > - i2c25 = &imux25; > - i2c26 = &imux26; > - i2c27 = &imux27; > i2c28 = &imux28; > i2c29 = &imux29; > i2c30 = &imux30; > @@ -391,33 +387,6 @@ gpio@31 { > "","","",""; > }; > > - i2c-mux@71 { > - compatible = "nxp,pca9546"; > - reg = <0x71>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - imux24: i2c@0 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0>; > - }; > - imux25: i2c@1 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <1>; > - }; > - imux26: i2c@2 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <2>; > - }; > - imux27: i2c@3 { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <3>; > - }; > - }; > // PTTV FRU > eeprom@52 { > compatible = "atmel,24c64"; > @@ -427,6 +396,31 @@ eeprom@52 { > > &i2c11 { > status = "okay"; > + > + gpio@30 { > + compatible = "nxp,pca9555"; > + reg = <0x30>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + gpio@31 { > + compatible = "nxp,pca9555"; > + reg = <0x31>; > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio-line-names = > + "","","","", > + "","","presence-cmm","", > + "","","","", > + "","","",""; > + }; > + > + // Aegis FRU > + eeprom@52 { > + compatible = "atmel,24c64"; > + reg = <0x52>; > + }; > }; > > &i2c12 { ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2024-06-17 23:50 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin 2024-06-13 15:24 ` [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip Peter Yin 2024-06-13 15:24 ` [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device Peter Yin 2024-06-16 20:04 ` kernel test robot 2024-06-13 15:24 ` [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name Peter Yin 2024-06-13 15:24 ` [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238 Peter Yin 2024-06-13 15:24 ` [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710 Peter Yin 2024-06-13 15:24 ` [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property Peter Yin 2024-06-17 19:18 ` kernel test robot 2024-06-17 23:50 ` Andrew Jeffery 2024-06-13 15:24 ` [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 Peter Yin 2024-06-17 7:41 ` Andrew Jeffery
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).