From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Nikita Travkin <nikita@trvn.ru>,
Neil Armstrong <neil.armstrong@linaro.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/7] usb: typec: ucsi: rework command execution functions
Date: Fri, 21 Jun 2024 01:55:23 +0300 [thread overview]
Message-ID: <20240621-ucsi-rework-interface-v2-4-a399ff96bf88@linaro.org> (raw)
In-Reply-To: <20240621-ucsi-rework-interface-v2-0-a399ff96bf88@linaro.org>
Rework command execution code to remove recursive calls of
ucsi_exec_command. This also streamlines the sync_control / read(CCI)
read (MESSAGE_IN) sequence, allowing further rework of the command code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/usb/typec/ucsi/ucsi.c | 134 ++++++++++++++++++++----------------------
1 file changed, 64 insertions(+), 70 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 81b459b26b74..58d9602bd752 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -63,25 +63,74 @@ static int ucsi_acknowledge(struct ucsi *ucsi, bool conn_ack)
return ucsi->ops->sync_control(ucsi, ctrl);
}
-static int ucsi_exec_command(struct ucsi *ucsi, u64 command);
-
-static int ucsi_read_error(struct ucsi *ucsi)
+static int ucsi_run_command(struct ucsi *ucsi, u64 command, u32 *cci,
+ void *data, size_t size, bool conn_ack)
{
- u16 error;
int ret;
- ret = ucsi_exec_command(ucsi, UCSI_GET_ERROR_STATUS);
- if (ret < 0)
+ *cci = 0;
+
+ ret = ucsi->ops->sync_control(ucsi, command);
+ if (ret)
return ret;
- ret = ucsi_read_message_in(ucsi, &error, sizeof(error));
+ ret = ucsi->ops->read_cci(ucsi, cci);
if (ret)
return ret;
- ret = ucsi_acknowledge(ucsi, false);
+ if (*cci & UCSI_CCI_BUSY)
+ return -EBUSY;
+
+ if (!(*cci & UCSI_CCI_COMMAND_COMPLETE))
+ return -EIO;
+
+ if (*cci & UCSI_CCI_NOT_SUPPORTED) {
+ if (ucsi_acknowledge(ucsi, false) < 0)
+ dev_err(ucsi->dev,
+ "ACK of unsupported command failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (*cci & UCSI_CCI_ERROR) {
+ /* Acknowledge the command that failed */
+ ret = ucsi_acknowledge(ucsi, false);
+ return ret ? ret : -EIO;
+ }
+
+ if (data) {
+ ret = ucsi_read_message_in(ucsi, data, size);
+ if (ret)
+ return ret;
+ }
+
+ ret = ucsi_acknowledge(ucsi, conn_ack);
if (ret)
return ret;
+ return 0;
+}
+
+static int ucsi_read_error(struct ucsi *ucsi)
+{
+ u16 error;
+ u32 cci;
+ int ret;
+
+ ret = ucsi_run_command(ucsi, UCSI_GET_ERROR_STATUS, &cci,
+ &error, sizeof(error), false);
+
+ if (cci & UCSI_CCI_BUSY) {
+ ret = ucsi_run_command(ucsi, UCSI_CANCEL, &cci, NULL, 0, false);
+
+ return ret ? ret : -EBUSY;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ if (cci & UCSI_CCI_ERROR)
+ return -EIO;
+
switch (error) {
case UCSI_ERROR_INCOMPATIBLE_PARTNER:
return -EOPNOTSUPP;
@@ -121,78 +170,23 @@ static int ucsi_read_error(struct ucsi *ucsi)
return -EIO;
}
-static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd)
-{
- u32 cci;
- int ret;
-
- ret = ucsi->ops->sync_control(ucsi, cmd);
- if (ret)
- return ret;
-
- ret = ucsi->ops->read_cci(ucsi, &cci);
- if (ret)
- return ret;
-
- if (cmd != UCSI_CANCEL && cci & UCSI_CCI_BUSY)
- return ucsi_exec_command(ucsi, UCSI_CANCEL);
-
- if (!(cci & UCSI_CCI_COMMAND_COMPLETE))
- return -EIO;
-
- if (cci & UCSI_CCI_NOT_SUPPORTED) {
- if (ucsi_acknowledge(ucsi, false) < 0)
- dev_err(ucsi->dev,
- "ACK of unsupported command failed\n");
- return -EOPNOTSUPP;
- }
-
- if (cci & UCSI_CCI_ERROR) {
- /* Acknowledge the command that failed */
- ret = ucsi_acknowledge(ucsi, false);
- if (ret)
- return ret;
-
- if (cmd == UCSI_GET_ERROR_STATUS)
- return -EIO;
-
- return ucsi_read_error(ucsi);
- }
-
- if (cmd == UCSI_CANCEL && cci & UCSI_CCI_CANCEL_COMPLETE) {
- ret = ucsi_acknowledge(ucsi, false);
- return ret ? ret : -EBUSY;
- }
-
- return UCSI_CCI_LENGTH(cci);
-}
-
static int ucsi_send_command_common(struct ucsi *ucsi, u64 command,
void *data, size_t size, bool conn_ack)
{
- u8 length;
+ u32 cci;
int ret;
mutex_lock(&ucsi->ppm_lock);
- ret = ucsi_exec_command(ucsi, command);
- if (ret < 0)
- goto out;
-
- length = ret;
-
- if (data) {
- ret = ucsi_read_message_in(ucsi, data, size);
- if (ret)
- goto out;
+ ret = ucsi_run_command(ucsi, command, &cci, data, size, conn_ack);
+ if (cci & UCSI_CCI_BUSY) {
+ ret = ucsi_run_command(ucsi, UCSI_CANCEL, &cci, NULL, 0, false);
+ return ret ? ret : -EBUSY;
}
- ret = ucsi_acknowledge(ucsi, conn_ack);
- if (ret)
- goto out;
+ if (cci & UCSI_CCI_ERROR)
+ return ucsi_read_error(ucsi);
- ret = length;
-out:
mutex_unlock(&ucsi->ppm_lock);
return ret;
}
--
2.39.2
next prev parent reply other threads:[~2024-06-20 22:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-20 22:55 [PATCH v2 0/7] usb: typec: ucsi: rework glue driver interface Dmitry Baryshkov
2024-06-20 22:55 ` [PATCH v2 1/7] usb: typec: ucsi: move ucsi_acknowledge() from ucsi_read_error() Dmitry Baryshkov
2024-06-20 22:55 ` [PATCH v2 2/7] usb: typec: ucsi: simplify command sending API Dmitry Baryshkov
2024-06-20 22:55 ` [PATCH v2 3/7] usb: typec: ucsi: split read operation Dmitry Baryshkov
2024-06-20 22:55 ` Dmitry Baryshkov [this message]
2024-06-20 22:55 ` [PATCH v2 5/7] usb: typec: ucsi: inline ucsi_read_message_in Dmitry Baryshkov
2024-06-20 22:55 ` [PATCH v2 6/7] usb: typec: ucsi: extract common code for command handling Dmitry Baryshkov
2024-06-25 15:24 ` [Linux-stm32] " Fabrice Gasnier
2024-06-25 16:49 ` Dmitry Baryshkov
2024-06-27 15:49 ` Fabrice Gasnier
2024-06-27 15:58 ` Dmitry Baryshkov
2024-06-27 16:49 ` Fabrice Gasnier
2024-06-27 20:14 ` Dmitry Baryshkov
2024-06-28 9:27 ` Fabrice Gasnier
2024-06-20 22:55 ` [PATCH v2 7/7] usb: typec: ucsi: reorder operations in ucsi_run_command() Dmitry Baryshkov
2024-06-25 14:28 ` [PATCH v2 0/7] usb: typec: ucsi: rework glue driver interface Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240621-ucsi-rework-interface-v2-4-a399ff96bf88@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=alexandre.torgue@foss.st.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-usb@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=nikita@trvn.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).