linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Haojian Zhuang <haojian.zhuang@gmail.com>,
	Daniel Mack <daniel@zonque.org>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Arnd Bergmann <arnd@arndb.de>,
	Linus Walleij <linus.walleij@linaro.org>,
	soc@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 02/10] ARM: pxa: consolidate GPIO chip platform data
Date: Fri, 28 Jun 2024 11:08:42 -0700	[thread overview]
Message-ID: <20240628180852.1738922-3-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20240628180852.1738922-1-dmitry.torokhov@gmail.com>

The platform data for the GPIO controllers for the boards using non-DT
setup is the same between PXA25x (gumstix) and PXA27x (Spitz) devices.
Move it into devices.c to consolidate code. It will help with conversion
to software nodes/properties.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/arm/mach-pxa/devices.c | 13 +++++++++++++
 arch/arm/mach-pxa/pxa25x.c  |  7 +------
 arch/arm/mach-pxa/pxa27x.c  |  8 +-------
 3 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 1e4cd502340e..7cc6db2d1615 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -7,6 +7,7 @@
 #include <linux/clk-provider.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/gpio-pxa.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/soc/pxa/cpu.h>
 
@@ -17,6 +18,7 @@
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmp_dma.h>
 
+#include "mfp-pxa2xx.h"
 #include "regs-ost.h"
 #include "reset.h"
 #include "devices.h"
@@ -650,11 +652,19 @@ struct resource pxa_resource_gpio[] = {
 	},
 };
 
+static struct pxa_gpio_platform_data pxa2xx_gpio_info = {
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+	.gpio_set_wake	= gpio_set_wake,
+};
+
 struct platform_device pxa25x_device_gpio = {
 	.name		= "pxa25x-gpio",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
+	.dev		= {
+		.platform_data	= &pxa2xx_gpio_info,
+	},
 };
 
 struct platform_device pxa27x_device_gpio = {
@@ -662,6 +672,9 @@ struct platform_device pxa27x_device_gpio = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
+	.dev		= {
+		.platform_data	= &pxa2xx_gpio_info,
+	},
 };
 
 static struct resource pxa_dma_resource[] = {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 02712d24be82..2ab3d8d66466 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -178,12 +178,8 @@ void __init pxa25x_map_io(void)
 	pxa25x_get_clk_frequency_khz(1);
 }
 
-static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-	.gpio_set_wake	= gpio_set_wake,
-};
-
 static struct platform_device *pxa25x_devices[] __initdata = {
+	&pxa25x_device_gpio,
 	&pxa25x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -244,7 +240,6 @@ static int __init pxa25x_init(void)
 
 		if (!of_have_populated_dt()) {
 			pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
-			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 			ret = platform_add_devices(pxa25x_devices,
 						   ARRAY_SIZE(pxa25x_devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d71491e2e1d6..b135b9ef665c 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -276,12 +276,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
-static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-	.gpio_set_wake	= gpio_set_wake,
-};
-
 static struct platform_device *devices[] __initdata = {
+	&pxa27x_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -345,8 +341,6 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
-			pxa_register_device(&pxa27x_device_gpio,
-					    &pxa27x_gpio_info);
 			pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
-- 
2.45.2.803.g4e1b14247a-goog



  parent reply	other threads:[~2024-06-28 18:09 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-28 18:08 [PATCH 00/10] ARM: pxa: use software nodes/properties for GPIOs Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 01/10] ARM: spitz: fix GPIO assignment for backlight Dmitry Torokhov
2024-06-28 18:08 ` Dmitry Torokhov [this message]
2024-06-28 18:08 ` [PATCH 03/10] ARM: pxa/gumstix: convert vbus gpio to use software nodes Dmitry Torokhov
2024-08-06  7:19   ` Arnd Bergmann
2024-08-06 16:58     ` Dmitry Torokhov
2024-08-06 20:36       ` Arnd Bergmann
2024-06-28 18:08 ` [PATCH 04/10] ARM: spitz: Simplify instantiating SPI controller Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 05/10] ARM: spitz: Use software nodes to describe SPI CS lines Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 06/10] ARM: spitz: Use software nodes to describe audio GPIOs Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 07/10] ARM: spitz: Use software nodes to describe LCD GPIOs Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 08/10] ARM: spitz: Use software nodes to describe MMC GPIOs Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 09/10] ARM: spitz: Use software nodes to describe LED GPIOs Dmitry Torokhov
2024-06-28 18:08 ` [PATCH 10/10] ARM: spitz: Use software nodes for the ADS7846 touchscreen Dmitry Torokhov
2024-06-28 20:59 ` [PATCH 00/10] ARM: pxa: use software nodes/properties for GPIOs Arnd Bergmann
2024-06-28 21:08   ` Arnd Bergmann
2024-06-28 21:44   ` Dmitry Torokhov
2024-06-29  7:34     ` Arnd Bergmann
2024-06-30  8:07 ` Linus Walleij
2024-06-30  8:41   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240628180852.1738922-3-dmitry.torokhov@gmail.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=arnd@arndb.de \
    --cc=daniel@zonque.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robert.jarzmik@free.fr \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).