From: Varshini Rajendran <varshini.rajendran@microchip.com>
To: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <mturquette@baylibre.com>,
<sboyd@kernel.org>, <tglx@linutronix.de>, <sre@kernel.org>,
<p.zabel@pengutronix.de>, <richard.genoud@bootlin.com>,
<radu_nicolae.pirea@upb.ro>, <gregkh@linuxfoundation.org>,
<jirislaby@kernel.org>, <linux@armlinux.org.uk>,
<mihai.sain@microchip.com>, <andrei.simion@microchip.com>,
<varshini.rajendran@microchip.com>,
<durai.manickamkr@microchip.com>, <arnd@arndb.de>,
<akpm@linux-foundation.org>, <mpe@ellerman.id.au>,
<geert+renesas@glider.be>, <rdunlap@infradead.org>,
<dharma.b@microchip.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-pm@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-serial@vger.kernel.org>
Subject: [PATCH v5 00/27] Add support for sam9x7 SoC family
Date: Wed, 3 Jul 2024 15:50:11 +0530 [thread overview]
Message-ID: <20240703102011.193343-1-varshini.rajendran@microchip.com> (raw)
This patch series adds support for the new SoC family - sam9x7.
- The device tree, configs and drivers are added
- Clock driver for sam9x7 is added
- Support for basic peripherals is added
- Target board SAM9X75 Curiosity is added
Changes in v5:
--------------
- Addressed all the review comments in the patches
- Picked up all Acked-by and Reviewed-by tags
- Dropped applied patches from the series
- Addressed the ABI breakage reported in the IRQ patch
- All the specific changes are captured in the corresponding patches
Changes in v4:
--------------
- Addressed all the review comments in the patches
- Picked up all Acked-by and Reviewed-by tags
- Dropped applied patches from the series
- Added pwm node and related dt binding documentation
- Added support for exporting some clocks to DT
- Dropped USB related patches and changes. See NOTE.
- All the specific changes are captured in the corresponding patches
NOTE: Owing to the discussion here
https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/
the USB related changes are dropped from this series in order to enable
us to work on the mentioned issues before adding new compatibles as
said. The issues/warnings will be addressed in subsequent patches.
After which the USB related support for sam9x7 SoCs will be added. Hope
this works out fine.
Changes in v3:
--------------
- Fixed the DT documentation errors pointed out in v2.
- Dropped Acked-by tag in tcb DT doc patch as it had to be adapted
according to sam9x7 correctly.
- Picked by the previously missed tags.
- Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names
property" as the warning was not found while validating DT-schema for
at91-sam9x75_curiosity.dtb.
- Dropped redundant words in the commit message.
- Fixed the CHECK_DTBS warnings validated against
at91-sam9x75_curiosity.dtb.
- Renamed dt nodes according to naming convention.
- Dropped unwanted status property in dts.
- Removed nodes that are not in use from the board dts.
- Removed spi DT doc patch from the series as it was already applied
and a fix patch was applied subsequently. Added a patch to remove the
compatible to adapt sam9x7.
- Added sam9x7 compatibles in usb dt documentation.
Changes in v2:
--------------
- Added sam9x7 specific compatibles in DT with fallbacks
- Documented all the newly added DT compatible strings
- Added device tree for the target board sam9x75 curiosity and
documented the same in the DT bindings documentation
- Removed the dt nodes that are not supported at the moment
- Removed the configs added by previous version that are not supported
at the moment
- Fixed all the corrections in the commit message
- Changed all the instances of copyright year to 2023
- Added sam9x7 flag in PIT64B configuration
- Moved macro definitions to header file
- Added another divider in mck characteristics in the pmc driver
- Fixed the memory leak in the pmc driver
- Dropped patches that are no longer needed
- Picked up Acked-by and Reviewed-by tags
Varshini Rajendran (27):
dt-bindings: atmel-sysreg: add sam9x7
dt-bindings: atmel-ssc: add microchip,sam9x7-ssc
dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
ARM: at91: pm: add support for sam9x7 SoC family
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: add support in SoC driver for new sam9x7
dt-bindings: clocks: atmel,at91sam9x5-sckc
dt-bindings: clocks: atmel,at91rm9200-pmc
clk: at91: clk-sam9x60-pll: re-factor to support individual core freq
outputs
clk: at91: sam9x7: add support for HW PLL freq dividers
clk: at91: sama7g5: move mux table macros to header file
dt-bindings: clock: at91: Allow PLLs to be exported and referenced in
DT
clk: at91: sam9x7: add sam9x7 pmc driver
dt-bindings: interrupt-controller: Add support for sam9x7 aic
dt-bindings: interrupt-controller: Document the property
microchip,nr-irqs
irqchip/atmel-aic5: Add support to get nr_irqs from DT for sam9x60 &
sam9x7
ARM: dts: at91: sam9x60: Add nirqs property in the dt node
power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
power: reset: at91-reset: add reset support for sam9x7 SoC
power: reset: at91-reset: add sdhwc support for sam9x7 SoC
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: configs: at91: enable config flags for sam9x7 SoC family
ARM: dts: at91: sam9x7: add device tree for SoC
dt-bindings: arm: add sam9x75 curiosity board
ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
.../devicetree/bindings/arm/atmel-at91.yaml | 6 +
.../devicetree/bindings/arm/atmel-sysregs.txt | 7 +-
.../bindings/clock/atmel,at91rm9200-pmc.yaml | 2 +
.../bindings/clock/atmel,at91sam9x5-sckc.yaml | 4 +-
.../interrupt-controller/atmel,aic.yaml | 28 +-
.../devicetree/bindings/misc/atmel-ssc.txt | 1 +
.../power/reset/atmel,sama5d2-shdwc.yaml | 3 +
.../reset/atmel,at91sam9260-reset.yaml | 4 +
.../bindings/serial/atmel,at91-usart.yaml | 9 +-
arch/arm/boot/dts/microchip/Makefile | 3 +
.../dts/microchip/at91-sam9x75_curiosity.dts | 312 +++++
arch/arm/boot/dts/microchip/sam9x60.dtsi | 1 +
arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++
arch/arm/configs/at91_dt_defconfig | 1 +
arch/arm/mach-at91/Kconfig | 22 +-
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/generic.h | 2 +
arch/arm/mach-at91/pm.c | 29 +
arch/arm/mach-at91/sam9x7.c | 33 +
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/clk-sam9x60-pll.c | 42 +-
drivers/clk/at91/pmc.h | 18 +
drivers/clk/at91/sam9x60.c | 7 +
drivers/clk/at91/sam9x7.c | 946 +++++++++++++
drivers/clk/at91/sama7g5.c | 42 +-
drivers/irqchip/irq-atmel-aic5.c | 8 +-
drivers/power/reset/Kconfig | 4 +-
drivers/power/reset/at91-sama5d2_shdwc.c | 1 +
drivers/soc/atmel/soc.c | 23 +
drivers/soc/atmel/soc.h | 9 +
include/dt-bindings/clock/at91.h | 4 +
31 files changed, 2750 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
create mode 100644 arch/arm/mach-at91/sam9x7.c
create mode 100644 drivers/clk/at91/sam9x7.c
--
2.25.1
next reply other threads:[~2024-07-03 10:21 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-03 10:20 Varshini Rajendran [this message]
2024-07-03 10:26 ` [PATCH v5 01/27] dt-bindings: atmel-sysreg: add sam9x7 Varshini Rajendran
2024-07-03 10:26 ` [PATCH v5 02/27] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc Varshini Rajendran
2024-07-03 10:26 ` [PATCH v5 03/27] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7 Varshini Rajendran
2024-07-03 15:44 ` Conor Dooley
2024-07-03 10:26 ` [PATCH v5 04/27] ARM: at91: pm: add support for sam9x7 SoC family Varshini Rajendran
2024-07-14 13:43 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 05/27] ARM: at91: pm: add sam9x7 SoC init config Varshini Rajendran
2024-07-03 10:55 ` Alexandre Belloni
2024-07-04 8:35 ` Varshini.Rajendran
2024-07-14 13:38 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 06/27] ARM: at91: add support in SoC driver for new sam9x7 Varshini Rajendran
2024-07-03 10:27 ` [PATCH v5 07/27] dt-bindings: clocks: atmel,at91sam9x5-sckc Varshini Rajendran
2024-07-14 13:40 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 08/27] dt-bindings: clocks: atmel,at91rm9200-pmc Varshini Rajendran
2024-07-14 13:39 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 09/27] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs Varshini Rajendran
2024-07-14 13:38 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 10/27] clk: at91: sam9x7: add support for HW PLL freq dividers Varshini Rajendran
2024-07-15 8:06 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 11/27] clk: at91: sama7g5: move mux table macros to header file Varshini Rajendran
2024-07-14 13:39 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 12/27] dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT Varshini Rajendran
2024-07-14 13:38 ` claudiu beznea
2024-07-03 10:28 ` [PATCH v5 13/27] clk: at91: sam9x7: add sam9x7 pmc driver Varshini Rajendran
2024-07-14 13:55 ` claudiu beznea
2024-07-15 6:46 ` Varshini.Rajendran
2024-07-15 8:44 ` claudiu beznea
2024-07-03 10:28 ` [PATCH v5 14/27] dt-bindings: interrupt-controller: Add support for sam9x7 aic Varshini Rajendran
2024-07-03 15:39 ` Conor Dooley
2024-07-03 10:28 ` [PATCH v5 15/27] dt-bindings: interrupt-controller: Document the property microchip,nr-irqs Varshini Rajendran
2024-07-03 15:41 ` Conor Dooley
2024-07-09 6:13 ` Varshini.Rajendran
2024-07-09 14:06 ` Nicolas.Ferre
2024-07-09 14:13 ` Nicolas.Ferre
2024-07-10 9:01 ` Marc Zyngier
2024-07-11 12:42 ` Nicolas Ferre
2024-07-11 15:40 ` Conor Dooley
2024-07-08 15:58 ` Rob Herring
2024-07-03 10:28 ` [PATCH v5 16/27] irqchip/atmel-aic5: Add support to get nr_irqs from DT for sam9x60 & sam9x7 Varshini Rajendran
2024-07-03 10:28 ` [PATCH v5 18/27] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 Varshini Rajendran
2024-07-14 13:41 ` claudiu beznea
2024-07-03 10:28 ` [PATCH v5 21/27] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 Varshini Rajendran
2024-07-03 10:29 ` [PATCH v5 22/27] dt-bindings: power: reset: atmel,sama5d2-shdwc: " Varshini Rajendran
2024-07-03 10:29 ` [PATCH v5 23/27] ARM: at91: Kconfig: add config flag for SAM9X7 SoC Varshini Rajendran
2024-07-03 10:29 ` [PATCH v5 24/27] ARM: configs: at91: enable config flags for sam9x7 SoC family Varshini Rajendran
2024-07-14 13:40 ` claudiu beznea
2024-07-03 10:29 ` [PATCH v5 26/27] dt-bindings: arm: add sam9x75 curiosity board Varshini Rajendran
2024-07-14 13:41 ` claudiu beznea
2024-07-03 10:29 ` [PATCH v5 27/27] ARM: dts: microchip: sam9x75_curiosity: " Varshini Rajendran
2024-07-14 13:46 ` claudiu beznea
2024-07-15 10:58 ` Varshini.Rajendran
2024-07-03 14:27 ` [PATCH v5 00/27] Add support for sam9x7 SoC family Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240703102011.193343-1-varshini.rajendran@microchip.com \
--to=varshini.rajendran@microchip.com \
--cc=akpm@linux-foundation.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andrei.simion@microchip.com \
--cc=arnd@arndb.de \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dharma.b@microchip.com \
--cc=durai.manickamkr@microchip.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mihai.sain@microchip.com \
--cc=mpe@ellerman.id.au \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=p.zabel@pengutronix.de \
--cc=radu_nicolae.pirea@upb.ro \
--cc=rdunlap@infradead.org \
--cc=richard.genoud@bootlin.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).