From: Varshini Rajendran <varshini.rajendran@microchip.com>
To: <linux@armlinux.org.uk>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <claudiu.beznea@tuxon.dev>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <varshini.rajendran@microchip.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v5 04/27] ARM: at91: pm: add support for sam9x7 SoC family
Date: Wed, 3 Jul 2024 15:56:53 +0530 [thread overview]
Message-ID: <20240703102653.195483-1-varshini.rajendran@microchip.com> (raw)
In-Reply-To: <20240703102011.193343-1-varshini.rajendran@microchip.com>
Add support and pm init config for sam9x7 SoC.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
Changes in v5:
- Removed usb related ids.
- Added sam9x7 specific rtc, rtt compatibles instead of sam9x60.
- Removed gmac id.
- Removed a blank line.
---
arch/arm/mach-at91/generic.h | 2 ++
arch/arm/mach-at91/pm.c | 29 +++++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 0c3960a8b3eb..acf0b3c82a30 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -12,6 +12,7 @@
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9_pm_init(void);
extern void __init sam9x60_pm_init(void);
+extern void __init sam9x7_pm_init(void);
extern void __init sama5_pm_init(void);
extern void __init sama5d2_pm_init(void);
extern void __init sama7_pm_init(void);
@@ -19,6 +20,7 @@ extern void __init sama7_pm_init(void);
static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9_pm_init(void) { }
static inline void __init sam9x60_pm_init(void) { }
+static inline void __init sam9x7_pm_init(void) { }
static inline void __init sama5_pm_init(void) { }
static inline void __init sama5d2_pm_init(void) { }
static inline void __init sama7_pm_init(void) { }
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 345b91dc6627..c0c861e1b8c1 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -233,6 +233,13 @@ static const struct of_device_id sama7g5_ws_ids[] = {
{ /* sentinel */ }
};
+static const struct of_device_id sam9x7_ws_ids[] = {
+ { .compatible = "microchip,sam9x7-rtc", .data = &ws_info[1] },
+ { .compatible = "microchip,sam9x7-rtt", .data = &ws_info[4] },
+ { .compatible = "microchip,sam9x7-gem", .data = &ws_info[5] },
+ { /* sentinel */ }
+};
+
static int at91_pm_config_ws(unsigned int pm_mode, bool set)
{
const struct wakeup_source_info *wsi;
@@ -1362,6 +1369,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
+ { .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] },
{ /* sentinel */ },
};
@@ -1499,6 +1507,27 @@ void __init sam9x60_pm_init(void)
soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
}
+void __init sam9x7_pm_init(void)
+{
+ static const int modes[] __initconst = {
+ AT91_PM_STANDBY, AT91_PM_ULP0,
+ };
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_SOC_SAM9X7))
+ return;
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
+ at91_pm_init(NULL);
+
+ soc_pm.ws_ids = sam9x7_ws_ids;
+ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+}
+
void __init at91sam9_pm_init(void)
{
int ret;
--
2.25.1
next prev parent reply other threads:[~2024-07-03 10:28 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-03 10:20 [PATCH v5 00/27] Add support for sam9x7 SoC family Varshini Rajendran
2024-07-03 10:26 ` [PATCH v5 01/27] dt-bindings: atmel-sysreg: add sam9x7 Varshini Rajendran
2024-07-03 10:26 ` [PATCH v5 02/27] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc Varshini Rajendran
2024-07-03 10:26 ` [PATCH v5 03/27] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7 Varshini Rajendran
2024-07-03 15:44 ` Conor Dooley
2024-07-03 10:26 ` Varshini Rajendran [this message]
2024-07-14 13:43 ` [PATCH v5 04/27] ARM: at91: pm: add support for sam9x7 SoC family claudiu beznea
2024-07-03 10:27 ` [PATCH v5 05/27] ARM: at91: pm: add sam9x7 SoC init config Varshini Rajendran
2024-07-03 10:55 ` Alexandre Belloni
2024-07-04 8:35 ` Varshini.Rajendran
2024-07-14 13:38 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 06/27] ARM: at91: add support in SoC driver for new sam9x7 Varshini Rajendran
2024-07-03 10:27 ` [PATCH v5 07/27] dt-bindings: clocks: atmel,at91sam9x5-sckc Varshini Rajendran
2024-07-14 13:40 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 08/27] dt-bindings: clocks: atmel,at91rm9200-pmc Varshini Rajendran
2024-07-14 13:39 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 09/27] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs Varshini Rajendran
2024-07-14 13:38 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 10/27] clk: at91: sam9x7: add support for HW PLL freq dividers Varshini Rajendran
2024-07-15 8:06 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 11/27] clk: at91: sama7g5: move mux table macros to header file Varshini Rajendran
2024-07-14 13:39 ` claudiu beznea
2024-07-03 10:27 ` [PATCH v5 12/27] dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT Varshini Rajendran
2024-07-14 13:38 ` claudiu beznea
2024-07-03 10:28 ` [PATCH v5 13/27] clk: at91: sam9x7: add sam9x7 pmc driver Varshini Rajendran
2024-07-14 13:55 ` claudiu beznea
2024-07-15 6:46 ` Varshini.Rajendran
2024-07-15 8:44 ` claudiu beznea
2024-07-03 10:28 ` [PATCH v5 14/27] dt-bindings: interrupt-controller: Add support for sam9x7 aic Varshini Rajendran
2024-07-03 15:39 ` Conor Dooley
2024-07-03 10:28 ` [PATCH v5 15/27] dt-bindings: interrupt-controller: Document the property microchip,nr-irqs Varshini Rajendran
2024-07-03 15:41 ` Conor Dooley
2024-07-09 6:13 ` Varshini.Rajendran
2024-07-09 14:06 ` Nicolas.Ferre
2024-07-09 14:13 ` Nicolas.Ferre
2024-07-10 9:01 ` Marc Zyngier
2024-07-11 12:42 ` Nicolas Ferre
2024-07-11 15:40 ` Conor Dooley
2024-07-08 15:58 ` Rob Herring
2024-07-03 10:28 ` [PATCH v5 16/27] irqchip/atmel-aic5: Add support to get nr_irqs from DT for sam9x60 & sam9x7 Varshini Rajendran
2024-07-03 10:28 ` [PATCH v5 18/27] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 Varshini Rajendran
2024-07-14 13:41 ` claudiu beznea
2024-07-03 10:28 ` [PATCH v5 21/27] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 Varshini Rajendran
2024-07-03 10:29 ` [PATCH v5 22/27] dt-bindings: power: reset: atmel,sama5d2-shdwc: " Varshini Rajendran
2024-07-03 10:29 ` [PATCH v5 23/27] ARM: at91: Kconfig: add config flag for SAM9X7 SoC Varshini Rajendran
2024-07-03 10:29 ` [PATCH v5 24/27] ARM: configs: at91: enable config flags for sam9x7 SoC family Varshini Rajendran
2024-07-14 13:40 ` claudiu beznea
2024-07-03 10:29 ` [PATCH v5 26/27] dt-bindings: arm: add sam9x75 curiosity board Varshini Rajendran
2024-07-14 13:41 ` claudiu beznea
2024-07-03 10:29 ` [PATCH v5 27/27] ARM: dts: microchip: sam9x75_curiosity: " Varshini Rajendran
2024-07-14 13:46 ` claudiu beznea
2024-07-15 10:58 ` Varshini.Rajendran
2024-07-03 14:27 ` [PATCH v5 00/27] Add support for sam9x7 SoC family Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240703102653.195483-1-varshini.rajendran@microchip.com \
--to=varshini.rajendran@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).