From: Bjorn Andersson <andersson@kernel.org>
To: arm@kernel.org, soc@kernel.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Arnd Bergmann" <arnd@arndb.de>,
"Olof Johansson" <olof@lixom.net>,
"Kevin Hilman" <khilman@baylibre.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
"Luca Weiss" <luca@z3ntu.xyz>, "André Apitzsch" <git@apitzsch.eu>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
"Valeriy Klimin" <vdos63@gmail.com>,
"Adam Honse" <calcprogrammer1@gmail.com>,
"Alexandre Messier" <alex@me.ssier.org>,
"Bryant Mairs" <bryant@mai.rs>, "Luca Weiss" <luca@lucaweiss.eu>,
"Raymond Hackley" <raymondhackley@protonmail.com>,
"Rayyan Ansari" <rayyan@ansari.sh>,
"Stanislav Jakubek" <stano.jakubek@gmail.com>
Subject: [GIT PULL] Qualcomm Arm32 DeviceTree updates for v6.11
Date: Thu, 4 Jul 2024 22:29:24 -0500 [thread overview]
Message-ID: <20240705032926.13333-1-andersson@kernel.org> (raw)
The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:
Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm32-for-6.11
for you to fetch changes up to 2a5454d0fe5684855581f8ad958afbcdc476fd64:
ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree (2024-07-02 22:15:57 -0500)
----------------------------------------------------------------
Qualcomm Arm32 DeviceTree updates for v6.11
This introduces new support for the Sony Xperia Z3 Compact, HTC One
(M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and
Samsung Galaxy Note 3 devices.
The Motorola Moto G and Motorola Moto G 4G gains accelerometer and
magnetometer support, with the latter also getting framebuffer supplies
and a temperature sensor wired up.
The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as
this is used for USB state changes.
The operating mode for SDC regulator is set to HPM on Sony Xperia
"Shinano" family to avoid brownouts on uSD-cards.
The panel on LGE Nexus 5 is connected to the backlight, to make this
turn off on blanking.
MSM8974 is transitioned to use the mailbox-abstraction for invoking
PC interrupts on remote processors.
----------------------------------------------------------------
Adam Honse (1):
ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3
Alexandre Messier (1):
ARM: dts: qcom: Add initial support for HTC One (M8)
André Apitzsch (3):
ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator
ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor
ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer supplies
Bryant Mairs (1):
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 8.0 Wi-Fi
Dmitry Baryshkov (6):
ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCC
ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCC
ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCC
ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCC
ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCC
Krzysztof Kozlowski (2):
ARM: dts: qcom: use generic node names for Adreno and QFPROM
ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROM
Luca Weiss (5):
ARM: dts: qcom: msm8974-hammerhead: Hook up backlight
ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name
ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon
ARM: dts: qcom: msm8974: Use mboxes properties for APCS
ARM: dts: qcom: msm8974: Use mboxes in smsm node
Raymond Hackley (1):
ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree
Rayyan Ansari (1):
ARM: dts: qcom: msm8226-microsoft-common: Enable smbb explicitly
Stanislav Jakubek (1):
ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer
Valeriy Klimin (2):
ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2
arch/arm/boot/dts/qcom/Makefile | 5 +
arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts | 53 ++
.../dts/qcom/qcom-apq8026-samsung-milletwifi.dts | 573 +++++++++++++++++++++
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 7 +-
arch/arm/boot/dts/qcom/qcom-apq8084.dtsi | 2 +-
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 1 -
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 3 +-
arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi | 1 -
.../dts/qcom/qcom-msm8226-microsoft-common.dtsi | 4 +
.../boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts | 386 ++++++++++++++
arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 4 +-
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 1 -
.../dts/qcom/qcom-msm8926-motorola-peregrine.dts | 121 +++++
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 1 -
.../qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 6 +-
.../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts | 401 ++++++++++++++
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 28 +-
arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 353 +++++++++++++
.../qcom-msm8974pro-sony-xperia-shinano-aries.dts | 44 ++
...qcom-msm8974pro-sony-xperia-shinano-common.dtsi | 2 +
20 files changed, 1967 insertions(+), 29 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts
reply other threads:[~2024-07-05 3:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240705032926.13333-1-andersson@kernel.org \
--to=andersson@kernel.org \
--cc=alex@me.ssier.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=bryant@mai.rs \
--cc=calcprogrammer1@gmail.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=git@apitzsch.eu \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=luca@lucaweiss.eu \
--cc=luca@z3ntu.xyz \
--cc=olof@lixom.net \
--cc=raymondhackley@protonmail.com \
--cc=rayyan@ansari.sh \
--cc=soc@kernel.org \
--cc=stano.jakubek@gmail.com \
--cc=vdos63@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).